
不久前,电子墨水设备还比较罕见且价格不菲。随着它们变得越来越普及和便宜,一些外形酷炫的设备出现了,但软件却不尽如人意。[Concretedog] 就入手了这样一款设备,而这次购买让他发现了一个适用于这个小巧设备的不错的开源固件项目。
[Concretedog] 描述了加载固件的过程,这几乎是最简单的改装了。将电子墨水屏连接到电脑,访问一个网站,就可以直接刷写固件。一旦屏幕运行了 CrossPoint Reader 固件,这款平价阅读器就解锁了一些新功能。固件允许你将设备变成 WiFi 热点并通过无线方式上传书籍,也可以连接到现有网络通过这种方式添加文件。它还支持旋转屏幕,如果你有多个阅读设备,还可以进行 KOReader 同步。
我们很高兴看到社区介入并改进那些硬件方面不错、有时甚至很棒,但在软件或固件方面有所欠缺的设备。感谢 [Concretedog] 分享你在这款设备上的体验以及这个很棒的开源固件。别忘了看看我们报道过的其他项目,那些项目通过固件调整让硬件焕发了新生。

Not so long ago, e-ink devices were rare and fairly pricey. As they have become more common and cheaper, some cool form-factor devices have emerged that suffer from subpar software. [Concretedog] picked up just such a device, and that purchase led to the discovery of a cool open-source firmware project for this tiny gadget.
[Concretedog] described the process of loading the firmware, which is just about as easy a modification as one can make. You plug the e-ink display into your computer, visit a website, and can flash it right from there. Once the display is running the CrossPoint Reader firmware, it unlocks some new tricks on this affordable reader. The firmware lets you turn the device into a WiFi hotspot and upload books wirelessly, or it can connect to an existing network to add files that way. It also enables rotating the display and KOReader syncing if you have multiple devices you read from.
We love seeing the community step in and improve devices that are hardware-wise good, sometimes great, but come up lacking in the software or firmware department. Thanks [Concretedog] for sharing your experience with this device and the cool open-source firmware. Be sure to check out some other projects we’ve featured where a firmware tweak breathed new life into the hardware.