Fairbuds 2 拆解:胶水极少,电池可轻松更换Fairbuds 2 Teardown Shows Little Glue, Easy Battery Swap


AI free token/AI免费积分
Fairbuds 2 拆解:胶水极少,电池可轻松更换

在无线耳机越来越被视为「用坏了就丢进电子垃圾」的今天,看到有公司在设计上反其道而行之,令人欣慰。在 iFixit 对新一代 Fairbuds 2 的拆解中,我们得到了详尽的拆机报告:可以够到它的可充电 LIR1054 纽扣电池,以及非常易维护的 PCB——即便需要更换短路的电容之类的问题也不难。

和第一代一样,这颗 3.6V 锂离子纽扣电池只需拉开电池仓盖就能取出,靠杠杆原理把它从外壳中撬出。尽管如此易拆且完全没有使用胶水,这款耳机仍然达到 IP54 防护等级,突如其来的大雨中奔跑也不怕。

想进一步拆进去,需要克服固定外壳的塑料卡扣,以及看起来少量的几处胶水。内部是承载核心元件的 PCB,其中包括基于 Cortex-M4F 的 Airoha AB1577S 芯片,负责蓝牙低功耗、触控以及其他功能。PCB 下方是纽扣电池座,再往下是唯一大量使用胶水的部分,也就是发声单元,这大概是为了防汗而做的妥协。即便如此,iFixit 拆完后成功复原,耳机仍能正常工作。

耳机盒的拆解更简单,只需拧开几颗螺丝。USB-C 接口是焊接在 PCB 上的,iFixit 对此提出了批评,但仍给出了 10/10 的可维修性评分。与苹果 AirPods 相比,这显然是两个世界——尽管最近 iFixit 对最新一代 AirPods 变得稍微可修(至少电池更换可以非破坏性进入)表示了「还算满意」。

本文来源:https://hackaday.com/2026/10/16/fairbuds-2-teardown-shows-little-glue-easy-battery-swap/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

In a world where wireless earbuds are increasingly seen as devices that you toss into the e-waste bin as soon as they stop working, it's heartening to see companies take the opposite approach with their designs. In a recent teardown of the new Fairbuds 2 by iFixit we get a blow-by-blow report of disassembling one of these devices, getting to its rechargeable LIR1054 coin cell, as well as the very accessible PCB should you have to replace a shorted capacitor or similar issue.

Much like with the first version, the 3.6 V lithium-ion coin cell can be extracted simply by pulling on the battery door, which leverages it out of the enclosure. Despite this easy access method and no glue these earbuds are still IP54 rated, so they're safe to wear when you're dashing for shelter in a sudden downpour.

Fairbuds 2 Teardown Shows Little Glue, Easy Battery Swap

To get further into the device, you have to overcome the plastic clips that hold the enclosure together, along with what appears to be a few dabs of glue. Inside it you find the PCB containing the guts, including the Airoha AB1577S, Cortex-M4F-based IC that provides the Bluetooth Low Energy capabilities as well as enabling the touch control and other features. Below the PCB is the coin cell holder, followed by the only part that saw real glue usage, namely the driver section. Presumably this is the compromise to keep things like sweat out of the device. Even so, after disassembly iFixit managed to reassemble the device and the earbud remained in working condition.

The case for the earbuds is even easier to disassemble, using just some bolts to unfasten. The USB-C port is soldered to the PCB which iFixit dinged them on, but still gave it a 10/10 on their repairability score. Compared to Apple's AirPods this is obviously a whole different world, although recently iFixit was somewhat pleased with the most recent AirPods generation being slightly more repairable, with non-destructive entry for a battery swap at least somewhat feasible.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry