
先楫半导体(HPMicro)推出了 HPM5100 系列 32 位 RISC-V 混合信号 MCU,首发型号为 HPM5151。该芯片主频 400MHz,配备 416KB SRAM、1MB Flash、四路 16 位 ADC、四路运算放大器和四路模拟比较器,面向模拟传感与电机控制场景。
芯片集成高速 USB 2.0 OTG 接口(内置 PHY)、CAN FD、多路 UART/SPI/I2C 以及 32 通道 PWM,支持硬件浮点运算与 DSP 指令;丰富的集成模拟外设可减少外部 ADC 与信号调理电路的需求。
主要规格包括:单核 32 位 RISC-V 处理器 @400MHz(高性能模式配合外部供电可达 480MHz),硬件 FPU、SIMD 与 DSP 指令支持,16KB L1 指令缓存与 16KB L1 数据缓存,最高 3.57 CoreMark/MHz;416KB SRAM、256KB ILM、128KB DLM、32KB AHB SRAM;1MB SiP Flash、128KB Boot ROM 与 4Kbit OTP;四路 16 位 SAR ADC(最高 2MSPS,可配置 12 位 4MSPS,支持差分输入);四路可配置为 PGA 的运算放大器;一路支持 CAN FD(最高 8Mbps)的 CAN 控制器;5 路 UART、4 路 SPI、3 路 I2C、最多 79 个 GPIO;安全启动、JTAG 保护、128 位唯一 ID 与 AES-128 CTR 外部 Flash 加密执行;工规级 -40°C 至 +105°C 温度范围;提供 LQFP100/QFN68/QFN48/QFN32 四种封装。
软件方面,HPM5100 由先楫开源 HPM SDK 支持,包含底层驱动、中间件以及 FreeRTOS、TinyUSB 等组件,相关支持已于 2026 年 9 月的 SDK 1.13.0 版本加入;开发者可使用 Segger Embedded Studio for RISC-V 进行开发。公司同时发布了 HPM5100EVK 评估板,集成 HPM5151 MCU、外部 QSPI NOR Flash、ES8389 音频编解码器、CAN 收发器与板载 HPM5301 调试器,并配有两个 USB Type-C 接口、电机控制接口、专用 ADC/OPAMP 接口以及树莓派兼容的 40-pin 扩展座。
HPM5100 系列目前已量产,HPM5151IN61(QFN48)、HPM5151IN81(QFN68)、HPM5151IPE1(LQFP100)在国内商城售价分别为 15.60 元、16.90 元与 19.50 元,HPM5100EVKREVB 评估板售价 258 元。
本文来源:https://www.cnx-software.com/2026/10/15/hpmicro-hpm5100-risc-v-mcu-integrates-four-16-bit-adcs-four-op-amps-for-analog-sensing-and-motor-control/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
HPMicro has introduced the HPM5100 series, a family of 32-bit RISC-V mixed-signal MCUs, starting with the HPM5151 parts. It features a 400 MHz RISC-V processor, 416 KB SRAM, 1 MB flash, four 16-bit ADCs, four operational amplifiers, and four analog comparators.
It also includes a high-speed USB 2.0 OTG interface with an integrated PHY, CAN FD, multiple UART/SPI/I2C interfaces, and 32 PWM channels for motor control. The chip supports hardware floating-point operations and DSP instructions, while the integrated analog peripherals reduce the need for external ADCs and signal-conditioning circuits.
The MCU core is a single-core 32-bit RISC-V processor at 400 MHz (up to 480 MHz in high-performance mode with external power supply), with hardware FPU, SIMD and DSP instruction support, 16 KB L1 instruction cache and 16 KB L1 data cache, and up to 3.57 CoreMark/MHz. Memory includes 416 KB SRAM, 256 KB instruction local memory, 128 KB data local memory and 32 KB AHB SRAM, plus 1 MB SiP flash, 128 KB Boot ROM and 4 Kbit OTP, with an XPI interface supporting external serial NOR/NAND flash, HyperFlash, HyperRAM and PSRAM.

Analog peripherals include 4x 16-bit SAR ADCs at up to 2 MSPS (configurable to 12-bit at up to 4 MSPS with differential input support), 4x operational amplifiers configurable as programmable gain amplifiers, and 4x analog comparators with internal 12-bit DAC reference generation. The chip also provides a USB 2.0 high-speed OTG interface with integrated PHY, one CAN controller supporting CAN FD at up to 8 Mbps, 5x UART, 4x SPI, 3x I2C, up to 79x GPIO, secure boot, JTAG protection, 128-bit unique ID and AES-128 CTR encrypted execution from external NOR flash. Package options are LQFP100, QFN68, QFN48 and QFN32, with an ambient temperature range of -40 to +105 C.
On the software side, the HPM5100 is supported by HPMicro's open-source HPM SDK, which includes low-level drivers, middleware, and software components such as FreeRTOS and TinyUSB. Support for the HPM5100 and HPM5100EVK was added in SDK version 1.13.0, released in September 2026. Developers can use Segger Embedded Studio for RISC-V.
The company also released the HPM5100EVK evaluation board, which includes an HPM5151 MCU, external QSPI NOR flash, an ES8389 audio codec, a CAN transceiver, and an onboard HPM5301 debugger supporting JTAG and serial communication. The board also features two USB Type-C ports for debugging and USB OTG, a motor control connector, dedicated ADC and OPAMP connectors, and a Raspberry Pi-compatible 40-pin expansion header.
The HPM5100 series is currently in mass production, with the HPM5151IN61 (QFN48), HPM5151IN81 (QFN68) and HPM5151IPE1 (LQFP100) available for 15.60, 16.90 and 19.50 yuan respectively. The HPM5100EVKREVB evaluation board is available for 258 yuan.