微型电子纸屏跑出 30FPS:Waveshare ESP32-S3 电子纸开发板变 Game BoyTiny E-Paper Display Delivers 30 FPS Of Game Boy Fun


AI free token/AI免费积分
微型电子纸屏跑出 30FPS:Waveshare ESP32-S3 电子纸开发板变 Game Boy

刷新慢、有残影、对比度低——等等,我们说的是无源矩阵 LCD 还是电子纸显示屏?这或许正是电子纸 Game Boy 模拟器成为一类玩法原因:黑白灰电子纸屏幕的种种局限,让人想起任天堂 80 年代产品上的灰绿液晶屏。这一次,[Bo Made It] 用一块微雪(Waveshare)ESP32-S3-ePaper-1.54 开发板做出了这样的 Game Boy,并且跑出了 30FPS。

老读者可能会想:60FPS 的电子纸显示器我们都见过了,这有什么特别?问题很合理。答案是 [Bo] 用的是一块随机选到的开发板,内置波形表电子纸控制器,而不是 [Wenting Zhang] 项目所依赖的裸输入。另一方面,[Bo] 也坦言 [Wenting] 的电子墨 PaperBoy 项目直接启发了这个项目及其实现方式。

同样,最大的区别在于要穿过控制器这团「黑盒」,但事实证明你仍然可以通过它寻址单个像素。[Bo] 给每个像素设定了最多 8 个脉冲的「预算」,根据像素需要变化的幅度分配驱动时间,从而极大提升了速度。编辑部最喜欢的部分是他如何实现 Game Boy 的 4 位灰阶:实际上是故意「残影化」显示屏——如果像素只需变化一个色阶,就不给它足够的驱动时间完全翻转。

这让事情复杂起来:从黑到「白」比从「白」到下一个深灰需要更长时间,每种色彩转换的精确时序都需要逐一摸索。把时序调对花了大量校准工作,[Bo] 还用视频辅助自动化了这一过程。该流程仍在完善中,因此暂无 GitHub 链接;[Bo] 表示准备就绪后会开源一切。他也期待把这款显示驱动用在一台 PDA 形态的设备上。如果你觉得这与近期某个 20FPS 电子纸 hack 听起来很像——那是因为底层技术本是同源。

本文来源:https://hackaday.com/2026/10/14/tiny-e-paper-display-delivers-30-fps-of-game-boy-fun/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Slow refresh, ghosting and low-contrast - wait, are we talking about passive matrix LCDs, or e-paper displays? That might be why e-paper Game Boy emulators are a thing: the limitations of the black-on-grey e-paper screens remind us of the grey-on-green LCDs Nintendo used in the 80s. In this case Bo Made It made it out of a Waveshare ESP32-S3-ePaper-1.54, and got 30 FPS from it.

Now, regular readers might be thinking, so we've seen the 60 FPS e-paper monitor, how is this special? It's a fair question. The answer is that Bo is doing this on a randomly chosen dev board with a built in wavetable e-paper controller, rather than the bare inputs that allowed the Wenting Zhang's project to work. On the other hand, Bo does credit Wenting, particularly his e-ink PaperBoy project, with directly inspiring both the project and his implementation.

Tiny E-Paper Display Delivers 30 FPS Of Game Boy Fun

Again, the big difference is going through the blob of the controller, but it turns out you can still address individual pixels through it. Bo gave each pixel a budget for up to 8 pulses it depending on how much it needs to change, speeding things up immensely. Our favorite part is how he achieves the Game Boy's 4-bit greyscale by, in effect, deliberately ghosting the display. Pixels aren't driven long enough to fully flip them if they're going only one shade lighter or darker. This complicated matters, since going from black to white now takes longer than white to the next darker grey, and the exact timing needs to be worked out for each color transition. Getting that timing right took a lot of calibration, and we like how he used video to help automate the process.

That process is still ongoing, so there's no GitHub link yet. Bo will open source everything when it's ready, and we look forward to it. We also look forward to the PDA-like device he's going to be using this display driver for. If all this sounds similar to a recent 20 FPS e-paper hack, that's because it's the same underlying technology.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry