十年前,苹果跳过了 iPhone 9,用一台 iPhone X 终结了初代 iPhone 延续十年的宽额头与下巴,也顺手启动了一个围绕着「刘海」与「全面屏」争吵不休的十年。
而在 iPhone 即将迈入二十周年的前夜,历史似乎又要重演。
随着近期供应链以及各种爆料信息的密集浮出水面,苹果大概率会在 2027 年直接跨过「19」,端出那台属于二十周年的里程碑之作—— iPhone 20。
虽然距离正式的发布还有大半年,但笔者不妨顺着这些线索,感受这台决定苹果下一个十年的 iPhone 20,到底长什么样。

「一整块玻璃」的执念
iPhone 20 最大、也是当下最板上钉钉的变化,就是全面转向「四边曲面玻璃」外观。
这个执念实际上可以追溯到十年前。彼时执掌苹果外观的 Jony Ive,曾不止一次描绘过他对 iPhone 终极形态的幻想——变成「一整块玻璃(A single slab of glass)」
为此,苹果外观团队早期甚至测试过真正意义上的「纯玻璃机身」,但最终还是向工程现实低了头,具体原因笔者后文会聊到。

关于 iPhone 20 上,彭博社的 Mark Gurman 给出了当下最接近量产形态的一张拼图:这是一台「以玻璃为主的曲面 iPhone」——正面没有开孔,背面回归玻璃,曲面玻璃一路包裹到机身四边。
同时据爱范儿了解到的内部可信信源透露,苹果当下已敲定在正面使用一块四边微曲的玻璃盖板。
目的也正是尽可能抹除显示屏周围的边框,让表明区域一直延伸到机身边缘——正面观感上向「无边玻璃」无限靠近。

在当前的供应链工艺下,把表面的玻璃盖板做弯,实际上已经不算什么难事。但想要让底层的 OLED 面板跟着一起向四边弯曲,却绝非一件从容的事。
在笔者此前的【让 iPhone 成为一整块玻璃有多难】中曾聊到过,首先是物理工艺上,正如想用一张白纸完全包裹一个球面,当它需要同时沿横向和纵向改变曲率,纸张边缘必然会发生剧烈的挤压与拉扯。
更加精密的 OLED 显示屏上更是如此。面板内部包含了薄膜晶体管、电极、有机发光层等数十层复合结构,不同材料的厚度、弹性和受力特性天差地别。

苹果在 2024 年公开的专利《Backing Films for Displays with Curved Surfaces》中,就专门探讨了柔性表明面板在四角复合曲面成型时,所面临的压缩应力、起皱与拉伸开裂难题。
除了物理形变,由于 OLED 的 RGB 子像素在大视角下可能浮现不一致的亮度衰减与色彩偏移,显示屏弯曲区域不可避免会存在视角差异——反映到肉眼上,就是弧面边缘极易浮现发灰的状况。
正因如此,苹果将在 iPhone 20 上采取一套更聪明的折中解法:「纯平 OLED 面板 + 3D 热弯玻璃盖板」。
那既然底层的 OLED 不是弯的,盖板玻璃和表明面板在曲率上就并非完全贴合(Shape-matched)——像素并不会铺满到显示屏边缘。因而有消息称,苹果这次会借助弧面玻璃的光学折射、导光结构与视觉错觉,来形成「视觉上」的无边框。

至于前文提到那个理想中的「纯玻璃机身」为什么会流产,一个很核心的挫败原因,恰恰就出在玻璃本身。
如果完全取消金属中框,外壳玻璃就必须同时承担起外观、结构连接与跌落保护的三重任务。
但玻璃虽然硬度极高,却缺乏金属的韧性——它能承受很高的压缩载荷,唯独对边缘缺口、微小划痕和局部拉应力格外敏感。曲面越复杂,玻璃的厚度、曲率和内部残余应力就越难控制。
更无解的卡点在于多块玻璃面板之间的拼接。粘接材料必须同时兼顾强度、透明度和耐久性,但这在工程上几乎是个悖论:想要提高连接强度,接缝往往会变得更加显著;而一旦为了隐藏接缝去妥协材料和工艺,结构强度又会大打折扣。
所以,让前后两块曲面玻璃向侧边延伸、中间保留一圈金属中框,显然是更务实的挑选。
为了撑起这样的形态,这条金属中框就必须得扛起更大的结构强度。
这很容易让笔者联想到形态相似的 Apple Watch——此前,Apple Watch Ultra 3 和钛金属版 Series 11 的表壳,就已经规模化用上了金属 3D 打印工艺。
不同于传统 CNC「做减法」的铣削加工,借助激光逐层熔融金属粉末的 3D 打印,除了最直接的省料之外,更核心的长处在于制造微观纹理与复杂内部结构。

此前 iFixit 在拆解 iPhone Air 时就发现,其 USB-C 接口外壳正是苹果首次在 iPhone 上使用的 3D 打印钛金属零件。在 50 微米的显微镜下,这个接口表面展现出清晰的链状圆形「麦田圈」纹理。
这正是传统 CNC 刀具受限于尺寸和角度难以企及的地方——
3D 打印不仅能在零件内部构建复杂的晶格结构与过渡几何,还能在内壁直接「打印」出特殊的微观凹凸纹理。这些微观纹理协助结构「咬住」贴合在它上面的玻璃或塑料,大幅增强异质材料之间的机械锁合,同时改善防水密封表现。
换句话说,金属 3D 打印带给苹果的是传统加工无法企及的「结构自由度」,能为前后曲面玻璃腾出更精密的装配空间。

此前在接受爱范儿专访时,苹果机型外观副总裁 Kate Bergeron 就透露,团队已经充分掌握了钛金属的打印方式,接下来会探索将这项工艺应用到更多机型上。
事实上,在最新的折叠屏 iPhone Duo 的铰链轴盖上,苹果也已经用上了同样的钛金属打印工艺,足见这套工艺已经相当成熟。
所以对于明年的 iPhone 20 来说,作为一台前后都是曲面玻璃、中间只剩一条纤细金属中框的机器来说,用上 3D 打印的钛金属中框结构再合适不过。

这里实际上还有一个来自今年新机的侧面印证。
在今年的 iPhone 18 Pro 上,苹果不仅重新外观了芯片封装,让 A20 Pro 能更直接地传导热量,还把内部 VC 均热板的面积一口气扩大到了上一代的三倍。
这意味着,苹果正在摆脱过去单纯依赖铝合金中框辅助导热的思路,转而用更大 VC、铜板和石墨层来组成内部的散热平台——
不再需要像前两年那样,为了妥协散热而依赖铝合金机身导热,这也为钛金属的回归铺平了道路。

另外,iPhone 20 可能也不会像当年的 iPhone X 一样只给出一个尺寸。据悉,苹果正在同步筹备一大一小两个尺寸,定位分别对应现有的 Pro 与 Pro Max。
而据博主 @数码闲聊站 进一步透露,这两款新机的显示屏尺寸预计会比今年的 iPhone 18 Pro 系列再大上一圈,分别来到 6.41 英寸与 6.96 英寸。
把开孔都藏起来
真正意义上的「一整块玻璃」,指的绝不仅仅是材质本身,更是一种近乎偏执的「无开孔」一体化外观。
首先想到的肯定是屏下摄像头。今年的折叠屏新机 iPhone Duo 实际上已经替苹果迈出了第一步——首次在量产机型上,把内屏的前置摄像头藏到了显示屏下方。
但如果看过笔者此前关于 iPhone Duo 的实测就会知道,受限于像素层的遮挡与衍射,这颗屏下前摄的成像不仅发灰,细节也糊作一团。

这倒不是苹果一家的难题。即便是已经在这条路上死磕了多年的安卓厂商,至今也没有两全其美的办法,无非是在镜头上方区域抠掉一部分子像素、强行拉大像素间距,把透光率硬提上去。
代价也依旧没变,表明精度大打折扣,自拍也还是免不了雾蒙蒙。
好在 iPhone Duo 还有外屏前摄(甚至翻转后摄)可以救急;但到了只有一块显示屏的直板旗舰上,苹果显然不敢拿主力自拍镜头开玩笑。
这也意味着,人们心心念念的「零动岛」,在 iPhone 20 上大概率是悬了。

不过,笔者或许可以期待这次苹果给笔者带来真正的「屏下 Face ID」。
一套完整的 Face ID 需要红外泛光照明器、点阵投射器和红外摄像头协同工作。在今年的 iPhone 18 Pro 上,苹果就已经把负责接收的红外摄像头藏到了 OLED 显示屏下方,让灵动岛完成了第一次瘦身。
如果还想进一步抹平开孔,下一步就得把负责向人脸投射数万个红外光点的「点阵投射器」也一并塞进显示屏底下。
OLED 面板对红外光的遮挡与衍射确实棘手,不过翻看苹果近几年的专利就会发现,他们实际上已经攒下了不少相关的工艺储备——例如将泛光照明器和点阵投射器合并成单个紧凑的投影模块,或者使用平面光波导工艺,引导光辐射精准穿过显示屏像素间隙之类。
因而,笔者完全可以期待苹果在 iPhone 20 上交出一套全新的「挖孔前摄 + 屏下 Face ID」组合——届时,盘踞多年的药丸形灵动岛,或许真要缩成一个单挖孔的「灵动洞」了。

看完了显示屏正面,笔者再把视线移向机身四周的扬声器开孔。在这件事上,最近发布的新款 iPad mini 实际上已经替 iPhone 20 提前亮出了底牌。
这次新款 iPad mini 最让人惊喜的变化,就是首次量产了「Acoustic Display(声学表明)」显示屏发声工艺。
具体来说,它使用了一套混合声学结构:特制的低音单元借助表明屏震动输出低频,而高音单元则被巧妙地藏在了显示屏玻璃与铝合金外壳之间,直接干掉了传统的扬声器网孔。
毫无疑问,这项工艺在 iPad mini 上的落地,也是苹果为 iPhone 20 进一步消灭开孔所做的提前预演。
当然,受限于物理形态,iPhone 20 并不会原封不动地照搬 iPad mini 的声学结构。
正如苹果硬件工程副总裁 Dave Pakula 在采访中所言,「这块显示屏独特的尺寸和形态,让它的共振频率正好落在人耳可听范围、接近传统低音单元的频段」——换句话说,是因为 iPad mini 刚好具备足够大的面板尺寸,才能让整块显示屏直接承担低频发声。
相比之下,iPhone 的机身寸土寸金,既没有那么大的面板面积,内部声学空间也更为局促。
所以在 iPhone 20 上,苹果极有可能拿出一套类似的思路:借助显示屏发声直接取代正面的顶部听筒;与此同时,机身底部的扬声器网孔被大幅精简,离真正的「无孔机身」再近一步。

侧面的实体按键也可能迎来变化。MacRumor 爆料称,苹果正在测试用于侧边按钮、音量按钮、操作按钮和相机控制按钮的触觉替代思路。
实际上早在 iPhone 15 Pro 研发期间,代号为「Project Bongo」的固态按键思路就已经走到了原型机测试阶段,只是在最后关头被叫停。
不过苹果近几年仍在持续申请相关专利,也说明这项工艺并没有真正离开研发路线。在二十周年这个节点把它端上台面,无疑是最名正言顺的时机。

除此之外,鉴于 iPhone Air 与今年的 iPhone Duo 都已经果断砍掉了实体卡槽,并且国内运营商的 eSIM 激活流程也被打通(虽然还是很麻烦),因而对于一台追求极致一体化的 iPhone 20 来说,继续减少一个开孔大概也是顺手的事。
所以,笔者极有可能在明年的国行 Pro 系列 iPhone 上见到纯 eSIM 外观。
「里子」再升级
如果说四曲玻璃和无孔化外观是 iPhone 20 的「面子」,那么藏在玻璃底下的堆料,才是决定它能不能撑起二十周年招牌的「里子」。
正如上文所聊到的,iPhone 20 的这块显示屏不仅要向四周弯曲,苹果还希望它可以做得更薄、更亮。
为此,苹果很有可能会下放此前在 M4 版 iPad Pro 上首发的双层串联 OLED(Tandem OLED)工艺——借助叠加两层 OLED 发光结构,无需单纯拉高单层发光强度,就能达成更高的全局亮度和更低的功耗表现。

除此之外,早期曾有爆料称苹果打算同步引入 COE 工艺,把彩色滤光层直接整合进 OLED 封装结构里,以此干掉传统偏光片,减少显示屏厚度和光线损耗。不过截至当下,最新的面板供应链消息表明,由于量产工艺的挑战,COE 工艺在直板 iPhone 上的落地时间已经被推迟到了 2029 年。
相比之下,影像平台的变化可能更加值得关注。
在今年的 iPhone 18 Pro 上,苹果已经正式引入了物理可变光圈。这意味着苹果终于不再满足于单纯靠算法模拟景深,开始往寸土寸金的镜头模组里塞入更复杂的机械结构——
这一规格也无疑会延续到 iPhone 20 上。

与此同时,iPhone 20 也预计将换上一颗 1/1.12 英寸的超大底主摄传感器。作为比较,iPhone 自 14 Pro 沿用至今的主摄尺寸一直停留在 1/1.28 英寸,进光量将迎来一次实打实的提高。
不过,比大底本身更值得关注的,是苹果正在推进的自研 LOFIC(横向溢流积分电容)传感器工艺。
在此前披露的《具备高动态范围与低噪声的堆叠像素图像传感器》(Image Sensor With Stacked Pixels Having High Dynamic Range And Low Noise)专利文件中,就能看见一些创新的新特性。
首先,苹果把传统像素里的 4T 电路精简成了 3T 外观(省去了传统的传输门),专门腾出空间,在每个像素里塞进了 LOFIC 电路。拍高反差情形时,一旦负责感光的光电二极管吃饱了光,多余的光电子不会像以前那样直接溢出变成「死白过曝」,而是会顺着电路「横向溢流」到旁边容量不同的两级电容里保存。
其次,这颗传感器还使用了上下双层堆叠架构:上层芯片专心负责感光和接住溢流电荷,下层逻辑芯片则全权接管降噪与信号处理,并借助内置的电流存储电路,实时抵消掉传感器发热带来的暗部噪点。
得益于此,这套结构能在单次曝光里同时保住暗部、中调和高光细节,其动态范围更是高达约 120 dB (接近 20 档)。
更难得的是,据 MacRumors 报道,苹果外观的这套堆叠式传感器,物理体积反而比当下索尼供应的思路更加紧凑。
当「1/1.12 英寸大底」遇上「自研 LOFIC 」,iPhone 20 的实际成片感受无疑格外值得期待。

当然,尽管上述具体的影像规格当下仍停留在爆料阶段,但有一点几乎可以确定:
如果苹果真的要在现有影像平台上,同时叠加更大的传感器尺寸、机械可变光圈以及更复杂的防抖结构,那么摄像头模组的内部布局就很难再维持原样。
这也是为什么我认为,20 周年 iPhone 的影像升级绝不只是换一颗大号 CMOS 那么简单——它同样直接倒逼苹果去重构整个手机内部的堆叠布局。这种机身内部结构的重新排布,或许才是苹果在 iPhone 20 上最值得笔者关注的重点。
最后还有笔者老生常谈的芯片。按照苹果的迭代节奏,2027 年的机型预计也会搭载新一代 A21 Pro 芯片,继续推进 2nm 制程与端侧计算能力。

可以预见的是,当四曲全玻璃机身以及更多的变化真正摆上台面时,这台20 周年纪念之作,注定又会掀起一场血雨腥风。
就像十年前的那个「One more thing」,iPhone X 用一道手势划掉了盘踞十年的 Home 键,也把整个智能手机行业拽进了全面屏时代。
也正是在这十年里,iPhone 这条机型线的每一次迭代,几乎都伴随着不绝于耳的争吵:突兀的「灵动岛」、越来越厚的相机模组、让人摸不着头脑的「相机控制」按键——
放眼整个消费电子史,或许从来没有哪家公司的机型线像 iPhone 这般,一边定义着行业标准,一边承受着最苛刻的口诛笔伐。

很有意思的是,站在 2026 年回望,总有人把十年前的 iPhone X 奉为神作,感叹那是属于苹果的黄金时代。
可如果笔者真正穿回 2017 年的乔布斯剧院,当那道刺眼的「齐刘海」第一次亮起时,舆论场上的质疑,或许跟今天如出一辙。
人们总是习惯为眼前的改变感到冒犯,却又在十年后为当初的冒犯奉上掌声。
正如当年苹果用全面屏手势重新定义了手机交互一样,你很难在一项改变诞生的第一天,就预见它会在将来十年里引发怎样的蝴蝶效应。
科技史的诡谲之处就在于,真正的颠覆在登场时往往伴随着刺耳的杂音,而只有时间,才握有对机型的最终裁决权。
那么,站在下一个十年的起跑线上,iPhone 20 会是一台伟大的机型吗?
本文来源:https://www.ifanr.com/1689409
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Ten years ago, Apple skipped the iPhone 9 and, with the iPhone X, ended the ten-year era of thick top and bottom bezels carried over from the first-generation iPhone, inadvertently kicking off a decade of incessant debates surrounding the "notch" and the "full-screen display".
And on the verge of the iPhone's upcoming 20th anniversary, history appears to be repeating itself.
With recent supply chain data and various leaks surfacing in droves, it is highly likely that Apple will bypass the "19" in 2027 and unveil its milestone device for the 20th anniversary—the iPhone 20.
Although the official launch is still over half a year away, the author would like to follow these clues to envision exactly what the iPhone 20—a device that will define Apple's next decade—will look like.
The Obsession with "A Single Slab of Glass"
The biggest and most certain change to the iPhone 20 right now is the comprehensive shift to a "four-sided curved glass" exterior.
This obsession actually dates back a decade. At that time, Jony Ive, who was heading Apple's design team, described more than once his vision for the ultimate form of the iPhone—becoming "A single slab of glass."
For this reason, Apple's design team even tested a true "pure glass body" in the early days, but ultimately bowed to engineering realities, and the author will discuss the specific reasons later in the text.
Regarding the iPhone 20, Mark Gurman from Bloomberg has provided the most production-ready picture yet: it is a "glass-centric curved iPhone"—with no openings on the front, a return to glass on the back, and curved glass wrapping all the way around the four edges of the body.
Meanwhile, according to reliable internal sources learned of by iFanr, Apple has currently finalized the use of a glass cover plate with slightly curved edges on the front.
The purpose is precisely to eliminate the bezels around the display as much as possible, extending the display area all the way to the edges of the device—getting infinitely close to a "borderless glass" look from the front.
Under current supply chain manufacturing processes, bending the surface glass cover plate is no longer a difficult task. However, getting the underlying OLED panel to bend along with it toward the four edges is by no means an easy feat.
As discussed in the author's previous article, "How Hard It Is to Make the iPhone A Single Slab of Glass," in terms of physical manufacturing processes, it is like trying to wrap a spherical surface entirely with a piece of white paper; when it needs to alter its curvature simultaneously along the horizontal and vertical axes, the edges of the paper will inevitably undergo severe compression and stretching.
This is especially true for the more sophisticated OLED display. The panel contains dozens of composite layers inside, including thin-film transistors, electrodes, and organic light-emitting layers, and the thickness, elasticity, and mechanical properties of these different materials vary vastly.
In its patent "Backing Films for Displays with Curved Surfaces," published in 2024, Apple specifically addressed the challenges of compression stress, wrinkling, and tensile cracking that flexible display panels face when molded into compound curved surfaces at the four corners.
In addition to physical deformation, because the RGB sub-pixels of an OLED can exhibit inconsistent brightness attenuation and color shifts at wide viewing angles, there will inevitably be viewing angle discrepancies in the curved areas of the display—which manifest to the naked eye as a grayish appearance easily appearing along the curved edges.
For this reason, Apple will adopt a smarter compromise solution on the iPhone 20: "flat OLED panel + 3D thermally curved glass cover".
Since the underlying OLED is not curved, the cover glass and the display panel are not perfectly shape-matched in terms of curvature—the pixels will not extend all the way to the edges of the display. Therefore, sources claim that Apple will utilize the optical refraction, light-guiding structures, and visual illusions of the curved glass to create a "visually" borderless display.
Image | An earlier Apple patent leveraging optical refraction to hide the bezels.
As for why the idealized "all-glass body" mentioned earlier was shelved, a core reason for the failure lies precisely in the glass itself.
If the metal midframe is completely removed, the outer glass must simultaneously shoulder the triple tasks of aesthetics, structural connection, and drop protection.
However, while glass has extremely high hardness, it lacks the toughness of metal—it can withstand high compressive loads but is exceptionally sensitive to edge notches, micro-scratches, and localized tensile stress. The more complex the curvature, the harder it is to control the glass's thickness, curvature, and internal residual stress.
An even more intractable bottleneck lies in the joining of multiple glass panels. The adhesive material must simultaneously balance strength, transparency, and durability, but this is almost a paradox in engineering: to increase connection strength, the seams often become more prominent; yet, once materials and processes are compromised to hide the seams, structural strength is significantly compromised.
Therefore, having the front and rear curved glass panels extend to the sides while retaining a metal midframe in the middle is obviously the more pragmatic choice.
To support this form factor, this metal midframe must bear significantly greater structural strength.
This easily reminds the author of the similarly shaped Apple Watch—previously, the cases of the Apple Watch Ultra 3 and the titanium Series 11 have already adopted metal 3D printing technology on a mass scale.
Unlike traditional CNC subtractive milling, 3D printing that uses lasers to melt metal powder layer by layer, beyond the most direct benefit of material savings, has a more core advantage in manufacturing micro-textures and complex internal structures.
Previously, when iFixit disassembled the iPhone Air, it discovered that its USB-C port housing was exactly the first 3D-printed titanium part Apple used on an iPhone. Under a 50-micrometer microscope, the surface of this port exhibits a clear chain-like circular "crop circle" texture.
This is precisely where traditional CNC tools, limited by their size and angles, fall short—
3D printing can not only construct complex lattice structures and transitional geometries inside the part, but also directly "print" special microscopic textures onto the inner walls. These micro-textures help the structure "bite" into the glass or plastic fitted on top of it, greatly enhancing the mechanical interlocking between dissimilar materials while improving waterproof sealing performance.
In other words, metal 3D printing provides Apple with a "structural freedom" unattainable by traditional machining, freeing up more precise assembly space for the front and rear curved glass.
Previously, in an exclusive interview with iFanr, Kate Bergeron, Vice President of Apple Device Externals, revealed that the team has fully mastered the titanium printing method and will next explore applying this process to more models.
In fact, on the hinge shaft cover of the latest foldable iPhone Duo, Apple has also adopted the same titanium printing process, which is sufficient to show that this process is already quite mature.
So for next year's iPhone 20, as a device with curved glass on both the front and back and only a slim metal midframe in between, adopting a 3D-printed titanium midframe structure could not be more fitting.
There is also indirect corroboration from this year's new models.
On this year's iPhone 18 Pro, Apple not only redesigned the chip packaging to allow the A20 Pro to transfer heat more directly, but also expanded the area of the internal VC vapor chamber to three times that of the previous generation.
This means that Apple is moving away from its previous approach of relying solely on the aluminum alloy midframe for auxiliary heat dissipation, and is instead building an internal thermal platform using a larger VC, copper plates, and graphite layers—
It no longer needs to rely on the aluminum alloy body for heat conduction as a compromise for thermal performance as it did over the past two years, which paves the way for the return of titanium.
Additionally, the iPhone 20 may not come in just one size like the iPhone X did back in its day. Reports suggest that Apple is simultaneously preparing two sizes—a larger and a smaller one—positioned to correspond to the current Pro and Pro Max respectively.
Furthermore, according to tipster @数码闲聊站, the display sizes of these two new models are expected to be even larger than this year's iPhone 18 Pro series, reaching 6.41 inches and 6.96 inches respectively.
Hiding All the Cutouts
A "single piece of glass" in the true sense refers to far more than just the material itself; it is more of an almost obsessive, seamless "no-cutout" unified exterior.
The first thing that comes to mind is certainly the under-display camera. This year's new foldable iPhone Duo has actually taken the first step for Apple—hiding the inner display's front-facing camera beneath the screen for the first time on a mass-produced model.
However, anyone who has read the author's earlier hands-on review of the iPhone Duo would know that, limited by the obstruction and diffraction of the pixel layer, the imaging from this under-display front camera not only looks grayish, but the details are also completely blurred.
This is not a problem unique to Apple. Even Android manufacturers that have been grinding away on this path for years still have no perfect solution; they can only remove a portion of sub-pixels in the area above the lens, forcibly widen the pixel pitch, and hard-push the light transmittance up.
The cost remains unchanged: display precision is significantly compromised, and selfies still end up looking hazy.
Fortunately, the iPhone Duo still has an outer-display front camera (and even a rotating rear camera) as a backup; but when it comes to a flat-bar flagship with only a single display, Apple clearly cannot afford to gamble with the main selfie camera.
This also means that the "zero Dynamic Island" that people have been longing for is most likely off the table for the iPhone 20.
However, the author can perhaps hope that this time Apple will deliver a true "under-display Face ID."
A complete Face ID system requires the coordinated operation of an infrared flood illuminator, a dot projector, and an infrared camera. On this year's iPhone 18 Pro, Apple has already concealed the receiving infrared camera beneath the OLED display, allowing the Dynamic Island to undergo its first slimming down.
If the goal is to further eliminate the cutouts, the next step would be to also fit the "dot projector," which is responsible for projecting tens of thousands of infrared light points onto the user's face, beneath the display.
While the blocking and diffraction of infrared light by OLED panels is indeed tricky, a review of Apple's patents from recent years reveals that they have actually accumulated a substantial reserve of related process technologies—such as merging the flood illuminator and dot projector into a single compact projection module, or using planar optical waveguide technology to guide light radiation precisely through the gaps between display pixels.
Therefore, one can certainly expect Apple to deliver a brand-new "punch-hole front camera + under-display Face ID" combination on the iPhone 20—by then, the pill-shaped Dynamic Island that has dominated the front for years might truly shrink into a single-punch-hole "Dynamic Hole."
Having examined the front of the display, let us now shift our attention to the speaker openings around the device's body. In this regard, the recently released new iPad mini has actually already revealed its cards for the iPhone 20 in advance.
The most surprising change in this new iPad mini is the mass production of the "Acoustic Display" display sound technology for the first time.
Specifically, it employs a hybrid acoustic structure: a specially designed bass unit outputs low frequencies by vibrating the display surface, while the tweeter unit is cleverly concealed between the display glass and the aluminum alloy housing, completely eliminating the traditional speaker mesh holes.
Undoubtedly, the implementation of this technology on the iPad mini is also an early rehearsal by Apple for further eliminating cutouts on the iPhone 20.
Of course, constrained by physical form, the iPhone 20 will not simply copy the acoustic structure of the iPad mini verbatim.
As Apple Vice President of Hardware Engineering Dave Pakula stated in an interview, "The unique size and form of this display cause its resonance frequency to fall exactly within the human audible range, close to the frequency band of traditional bass units"—in other words, it is precisely because the iPad mini possesses a sufficiently large panel size that the entire display can directly handle low-frequency sound emission.
By contrast, space inside an iPhone body is extremely precious; it lacks such a large panel area, and the internal acoustic space is also much more cramped.
Therefore, on the iPhone 20, Apple is highly likely to adopt a similar approach: utilizing display sound emission to directly replace the front top earpiece; meanwhile, the speaker mesh holes on the bottom of the device will be significantly streamlined, bringing it one step closer to a truly "hole-free body."
The physical side buttons may also undergo changes. MacRumor reports that Apple is testing haptic replacement concepts for the side button, volume buttons, Action button, and Camera Control button.
In fact, as early as during the development of the iPhone 15 Pro, the solid-state button concept codenamed "Project Bongo" had already reached the prototype testing stage, only to be called off at the very last minute.
However, Apple's continuous application for related patents in recent years also indicates that this technology has not truly left the R&D roadmap. Bringing it to the forefront at the 20th-anniversary milestone is undoubtedly the most justifiable timing.
Furthermore, given that the iPhone Air and this year's iPhone Duo have both decisively dropped the physical SIM card slot, and the eSIM activation process for domestic carriers has been established (though it is still quite cumbersome), reducing one more cutout would likely be an easy task for an iPhone 20 pursuing ultimate integration.
Therefore, it is highly probable that we will see a pure eSIM design on next year's mainland China Pro series iPhones.
"Substance" Gets Another Upgrade
If the four-curved glass and hole-free exterior represent the "face" of the iPhone 20, then the component stacking hidden beneath the glass is the "substance" that will determine whether it can uphold the reputation of its 20th-anniversary flagship.
As discussed above, not only does Apple want the display on the iPhone 20 to curve in all directions, but it also hopes to make it thinner and brighter.
To achieve this, Apple is highly likely to introduce the dual-layer Tandem OLED (Tandem OLED) process that first debuted on the M4 iPad Pro—by stacking two OLED light-emitting structures, it can achieve higher overall brightness and lower power consumption without simply increasing the light-emitting intensity of a single layer.
Image | The right side of GALAXUS is OLED
In addition, early reports previously claimed that Apple intended to simultaneously introduce the COE process, integrating the color filter layer directly into the OLED encapsulation structure to eliminate traditional polarizers, thereby reducing display thickness and light loss. However, as of now, the latest panel supply chain news indicates that due to challenges in mass production, the implementation of the COE process on flat-screen iPhones has been postponed to 2029.
In contrast, the changes to the imaging platform may be even more worthy of attention.
With this year's iPhone 18 Pro, Apple has officially introduced a physical variable aperture. This means Apple is finally no longer satisfied with merely relying on algorithms to simulate depth of field, and has begun to pack more complex mechanical structures into its highly space-constrained camera module—
This specification will undoubtedly carry over to the iPhone 20 as well.
Image | The variable aperture of the iPhone 18 Pro
Meanwhile, the iPhone 20 is also expected to get a 1/1.12-inch ultra-large main camera sensor. For comparison, the main camera size that the iPhone has used since the 14 Pro has remained at 1/1.28 inches, so the amount of light entering will see a solid, tangible increase.
However, even more noteworthy than the large sensor itself is the self-developed LOFIC (Lateral Overflow Integration Capacitor) sensor process that Apple is currently advancing.
In the previously disclosed patent document for "Image Sensor With Stacked Pixels Having High Dynamic Range And Low Noise", some innovative new features can be seen.
First, Apple has streamlined the 4T circuit in traditional pixels into a 3T configuration (eliminating the traditional transmission gate) to specifically free up space and integrate a LOFIC circuit into each pixel. When shooting in high-contrast scenarios, once the photodiode responsible for light sensing is fully exposed to light, the excess photoelectrons will no longer simply overflow and cause "blown-out overexposure" as they did before, but will instead "laterally overflow" through the circuit into two capacitor stages with different capacities located nearby for storage.
Second, this sensor also utilizes a top-and-bottom dual-layer stacked architecture: the upper chip is dedicated to light sensing and capturing overflow charge, while the lower logic chip takes full control of noise reduction and signal processing, utilizing a built-in current storage circuit to cancel out dark-area noise caused by sensor heat in real time.
Thanks to this, this structure can simultaneously preserve shadow, midtone, and highlight details in a single exposure, with its dynamic range reaching as high as approximately 120 dB (close to 20 stops).
Even more remarkably, according to MacRumors, the physical footprint of this stacked sensor designed by Apple is actually more compact than the approach currently supplied by Sony.
When the "1/1.12-inch large sensor" meets the "self-developed LOFIC", the actual imaging experience of the iPhone 20 is undoubtedly highly anticipated.
Of course, while the specific imaging specifications mentioned above currently remain in the rumor stage, one thing is almost certain:
If Apple truly intends to layer larger sensor sizes, mechanical variable apertures, and more complex stabilization structures onto its existing imaging platform simultaneously, it will be difficult for the internal layout of the camera module to remain unchanged.
This is why I believe the imaging upgrade for the 20th-anniversary iPhone is far more than simply swapping in a larger CMOS sensor—it also directly compels Apple to reconstruct the entire internal stacking layout of the phone. This reconfiguration of the internal chassis structure may be the most noteworthy aspect of the iPhone 20 that deserves the author's closest attention.
Finally, there is the chip, a topic the author often revisits. Following Apple's iteration cycle, the 2027 models are expected to feature the next-generation A21 Pro chip, continuing the push for 2nm process technology and on-device computing capabilities.
It is foreseeable that when the quad-curved all-glass body and other changes are truly unveiled, this 20th-anniversary commemorative model is destined to trigger yet another fierce storm of controversy.
Just like that "One more thing" moment ten years ago, the iPhone X used a single gesture to obsolete the Home button that had dominated for a decade, and pulled the entire smartphone industry into the full-screen era.
It was precisely during this decade that nearly every iteration of the iPhone model line was accompanied by incessant debates: the jarring Dynamic Island, the increasingly bulky camera module, and the baffling "Camera Control" button—
Looking across the entire history of consumer electronics, perhaps no company's product line has been like the iPhone, simultaneously defining industry standards while enduring the harshest wave of criticism.
Interestingly, looking back from the year 2026, there are always those who hail the iPhone X from a decade ago as a masterpiece, lamenting that it represented Apple's golden age.
But if the author could truly travel back to the Steve Jobs Theater in 2017, when that glaring "notch" first lit up, the skepticism in public discourse might have been exactly the same as it is today.
People are always accustomed to feeling offended by immediate changes, yet a decade later, they applaud the very things that once offended them.
Just as Apple redefined mobile interaction with full-screen gestures back then, it is difficult to predict on the very first day of a change's birth the butterfly effect it will trigger over the coming decade.
The paradox of tech history is that true disruption is often accompanied by harsh noise upon its debut, and only time holds the final authority to pass judgment on a device.
So, standing at the starting line of the next decade, will the iPhone 20 be a great device?