
Wireless Tag 推出 WT99P461-S1,这是一款基于与今年 6 月发布的 ESP32P4C61-TINY 相同 WT01P461-S1 模组的 ESP32-P4X 与 ESP32-C61 开发板。
与迷你板的主要区别在于,WT99P461-S1 是一块全功能开发板,新增了百兆以太网(Fast Ethernet)、RS-485、CAN 总线、板载麦克风与扬声器接口等特性,同时保留了原有接口。
核心采用 ESP32-P4X(ESP32-P4 v3.2)双核 RISC-V 微控制器,主频 360/400 MHz,带 AI 指令扩展与单精度 FPU;另有一颗主频最高 40 MHz 的 RISC-V 低功耗(LP)核心。
显示方面提供 30 针 MIPI DSI 接口与 6 针电容触控(CTP)接口;音频配备板载麦克风与可接 4Ω/3W 扬声器的 2 针接口;网络则通过 RJ45 提供 10/100Mbps 百兆以太网,并由模组上的 ESP32-C61 提供 2.4GHz WiFi 6 与蓝牙 5.4。
扩展接口包括 50 针 GPIO 排针(引出 ESP32-P4 与 ESP32-C61 的 I/O)、RS485 与 CAN Bus 接线端子,以及用于 ESP32-P4 调试/烧录的 USB Type-C 口与用于 ESP32-C61 的 C61-PROG 接口。
板载固件基于 ESP-Brookesia 框架,提供类似智能手机的用户界面,内置若干应用、AI 视觉演示,并支持 7 英寸触摸屏。
此前 ESP32P4C61-TINY 通过 Kickstarter 众筹推出,而 Wireless Tag 决定在其官网直接销售 WT01P461-S1 开发板:单板 21 美元(约合 150 元人民币),含套件 42.50 美元。
本文来源:https://www.cnx-software.com/2026/11/04/21-esp32-p4x-and-esp32-c61-full-featured-board-offers-ethernet-wifi-6-rs485-can-bus-mipi-csi-dsi-and-more/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Wireless Tag WT99P461-S1 is an ESP32-P4X and ESP32-C61 board based on the same WT01P461-S1 module as found on the ESP32P4C61-TINY board introduced last June.
The main differences are that the WT99P461-S1 is a full-featured development board, adding features such as Fast Ethernet, RS-485, CAN bus, an on-board microphone, and a speaker connector. It still comes with a microSD card slot, MIPI DSI/CSI connectors, and other features, making it suitable for industrial HMIs, gateways, and control applications.
Wireless Module – Wireless-Tag WT01P461-S1 (25 x 25mm) Microcontroller – ESP32-P4X (ESP32-P4 v3.2) MCU Dual-core RISC-V microcontroller @ 360/400 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz GPU – 2D Pixel Processing Accelerator (PPA) VPU – H.264 and JPEG codec support Memory – 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM, 32MB PSRAM Storage – 128 KB HP ROM, 16 KB LP ROM Wireless – 2.4 GHz WiFi 6 and Bluetooth 5 via ESP32-C61 SoC Storage – 16MB NOR flash IPEX antenna connector Dimensions – 25 x 25 mm
Microcontroller – ESP32-P4X (ESP32-P4 v3.2) MCU Dual-core RISC-V microcontroller @ 360/400 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz GPU – 2D Pixel Processing Accelerator (PPA) VPU – H.264 and JPEG codec support Memory – 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM, 32MB PSRAM Storage – 128 KB HP ROM, 16 KB LP ROM
MCU Dual-core RISC-V microcontroller @ 360/400 MHz with AI instructions extension and single-precision FPU Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz
Dual-core RISC-V microcontroller @ 360/400 MHz with AI instructions extension and single-precision FPU
Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz
GPU – 2D Pixel Processing Accelerator (PPA)
Memory – 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM, 32MB PSRAM
Wireless – 2.4 GHz WiFi 6 and Bluetooth 5 via ESP32-C61 SoC
Display 30-pin MIPI DSI connector 6-pin CTP connector for capacitive touch function
6-pin CTP connector for capacitive touch function
Audio On-board microphone 2-pin speaker connector for up to 4Ω, 3W speaker
2-pin speaker connector for up to 4Ω, 3W speaker
Networking 10/100 Mbps Fast Ethernet RJ45 port WiFi 6 and Bluetooth 5.4 via ESP32-C61 on WT01P461-S1 module.

WiFi 6 and Bluetooth 5.4 via ESP32-C61 on WT01P461-S1 module.
USB USB 2.0 OTG Type-C port (Full-Speed) USB 2.0 OTG Type-A port (High-Speed)
Serial RS485 terminal block CAN Bus terminal block
Expansion – 50-pin GPIO header for ESP32-P4 and ESP32-C61 I/Os
Debugging/Programming C61-PROG interface for the ESP32-C61; note: alternatively, jumper cables can be connected to the 50-pin GPIO for flashing firmware. USB Type-C port for ESP32-P4 UART debugging, flashing firmware, and power
C61-PROG interface for the ESP32-C61; note: alternatively, jumper cables can be connected to the 50-pin GPIO for flashing firmware.
USB Type-C port for ESP32-P4 UART debugging, flashing firmware, and power
Misc Power switch Reset and BOOT buttons RGB LED
The product page does not clearly mention whether the module board is based on ESP32-P4X or ESP32-P4 (v1.3), but they do compare both versions. Wireless Tag confirmed by email that the module is indeed now based on the new ESP32P4 V3.2 chipset.
The board comes pre-loaded with firmware with a Smartphone-style user interface based on the ESP-Brookesia framework. It includes a few applications, AI vision demos, support for a 7-inch touchscreen display, MP3 audio playback, MJPEG video playback (H.264 not supported yet), Ethernet and WiFI/BLE connectivity, SC2336 camera support, and more. You’ll find instructions to get started and flash your own firmware to the ESP32-P4 and ESP32-C61 chips on the wiki . The company also points users to its GitHub account , but searches for WT99P461-S1 or WT01P461-S1 do not return any useful results. [update: the demo code can be found in a repository from another GitHub account]
While the ESP32P4C61-TINY board was introduced through a Kickstarter campaign, Wireless Tag has decided to sell the WT01P461-S1 board directly on its own website for $21 (board only) or $42.50 (kit with WTDK-LCD-7D0M 7-inch display). As usual, you’ll need to add shipping and taxes to get the total price.
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Support CNX Software! Donate via cryptocurrencies , become a Patron on Patreon, or purchase goods on Amazon or Aliexpress . We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.