IT之家 10 月 31 日消息,据 TCL 华星消息,10 月 31 日,TCL 华星 t8 项目设备搬入仪式在广州举行,随着主生产设备进场安装,全球首条印刷 OLED G8.6 代产线建设正式从“厂房建设期”切入“设备安装与调试期”。
据官方介绍,作为 TCL 华星面向下一代表明工艺布局的战略性项目,t8 项目是印刷 OLED 工艺达成产业升级的关键载体。项目总投资约 295 亿元,外观月加工玻璃基板能力约 2.25 万片,主要机型涵盖平板、笔记本电脑、表明器等应用领域,可延伸至柔性、折叠表明屏。
IT之家注意到,该项目自 2025 年 9 月 16 日正式打桩以来,历时 226 天完成主厂房封顶,刷新了行业最快封顶纪录。如今厂房设备搬入后,t8 项目将全面进入产线安装、动力平台联调及工艺验证阶段。团队将严把工程质量、严控建设节点,为 2027 年第四季度量产奠定基础。
TCL 华星维度称,印刷 OLED 使用喷墨打印工艺,将有机发光材料以“按需沉积”方式精准印刷到玻璃基板上,相比传统真空蒸镀,具备材料利用率更高、生产更绿色高质等显著长处,是业界公认的下一代表明工艺的关键路线。
本文来源:https://www.ithome.com/1/020/592.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
IT Home, October 31 — According to TCL CSOT, on October 31, the equipment move-in ceremony for TCL CSOT's t8 project was held in Guangzhou. With the main production equipment entering the site for installation, construction of the world's first printed OLED G8.6 generation production line has officially transitioned from the "plant construction phase" to the "equipment installation and commissioning phase."
According to official information, as a strategic project for TCL CSOT's next-generation display technology layout, the t8 project is a key carrier for achieving industrial upgrade of the printed OLED process. The project has a total investment of approximately 29.5 billion yuan, with a designed monthly glass substrate processing capacity of approximately 22,500 pieces. Main product categories cover applications including tablets, notebook computers, and display monitors, and can extend to flexible and foldable display screens.
IT Home noted that since the project officially began piling on September 16, 2025, it took 226 days to complete the topping out of the main factory building, setting a new record for the fastest topping out in the industry. Now, after the plant equipment move-in, the t8 project will fully enter the stages of production line installation, power platform joint commissioning, and process verification. The team will strictly control engineering quality and construction milestones to lay the foundation for mass production in Q4 2027.
TCL CSOT stated that printed OLED uses an inkjet printing process to precisely deposit organic light-emitting materials onto glass substrates in an "on-demand deposition" manner. Compared with traditional vacuum evaporation, it offers significant advantages such as higher material utilization and greener, higher-quality production, and is recognized by the industry as a key route for next-generation display technologies.
