
Waveshare UNO-Q-DSI-TOUCH-10.1A 是一款 10.1 英寸触摸屏显示器,专为 Arduino UNO Q 单板计算机设计。
Arduino UNO Q 通过 60 针 JMEDIA 和 JMISC 接口引出其 MIPI DSI 接口,而在实际应用中,通常需要像 Arduino UNO Media Carrier 这样的载板才能使用它。UNO-Q-DSI-TOUCH-10.1A 显示器通过集成这些接口解决了这个问题,用户可以直接将 Arduino UNO Q 插入其中,而无需额外的转接板或特殊接线。
Waveshare UNO-Q-DSI-TOUCH-10.1A 规格:
多点触控支持 电容式多点触控(据称实际触控点数在某种程度上取决于软件系统) 接口 I2C 钢化玻璃,光学贴合
电容式多点触控(据称实际触控点数在某种程度上取决于软件系统)
摄像头支持 – 22 针 CAMERA0 和 CAMERA1 MIPI CSI 连接器,仅支持 IMX219 摄像头模组。
音频 内置立体声扬声器 2 个 3.5 mm 音频接口(一个支持音频输出+麦克风,一个仅支持音频输出)
2 个 3.5 mm 音频接口(一个支持音频输出+麦克风,一个仅支持音频输出)
主机接口 – Arduino UNO Q 的 JMEDIA 和 JMISC 板对板连接器
供电 通过 UNO Q 上的 USB-C 端口提供 5V/3A 通过载板上的 USB-C 提供 5V 辅助供电
通过载板上的 USB-C 提供 5V 辅助供电
尺寸 – 239 x 147 x 19.11 mm(厚度不包含 Arduino UNO Q)
将 Arduino UNO Q 连接到显示器应该很简单,用户只需注意电路板的方向,并确保其与 JMEDIA 和 JMISC 连接器正确对齐。
除了集成的触摸屏显示器本身,UNO-Q-DSI-TOUCH-10.1A 还引出了两个 MIPI CSI 摄像头连接器、两个扬声器、两个音频接口和一个 RGB LED。所有功能的安装说明、软件配置(例如,需要在 Arduino App Lab 中启用载板支持)以及使用技巧都提供在文档网站上。
Waveshare UNO-Q-DSI-TOUCH-10.1A 电路板还支持两个摄像头
官方 Arduino Media UNO 载板可同时用于 Arduino UNO Q 和 VENTUNO Q(后者价格最近已上涨至 399 美元),而 Waveshare UNO-Q-DSI-TOUCH-10.1A 仅适用于 UNO Q,该公司明确表示不支持 VENTUNO Q。
Waveshare 在 AliExpress 上以 80.09 美元出售 UNO-Q-DSI-TOUCH-10.1A,在其自营商店中售价为 69.99 美元。如果你还没有 Arduino UNO Q 电路板,还提供包含 2GB/16GB 或 4GB/32GB 版本 SBC 的捆绑套装,售价 120 美元起。这款新的触摸屏显示器套件未来也可能出现在该公司的亚马逊商店中。
支持 CNX Software!可通过加密货币捐赠、在 Patreon 成为支持者,或在 Amazon 或 Aliexpress 上购买商品。文章内也使用联盟链接,如果你点击这些链接并完成购买,我们将获得佣金。
Pironman 5 Pro Max 评测 – 一款集成视频和音频功能、可选 UPS 套件的 Raspberry Pi 5 塔式机箱
Arduino UNO Media Carrier 为 UNO Q 和 VENTUNO Q 电路板增加 MIPI CSI/DSI 和音频连接器
Pironman 5 Pro Max Raspberry Pi 5 机箱新增 4.3 英寸触摸屏、摄像头安装座、扬声器、麦克风等
ESP32-C5 开发套件配备 3.5 英寸触摸 LCD,可选摄像头和电池
基于 NanoPi M4V2 搭建运行 Armbian(Ubuntu/Debian)的一体式 Linux PC
本文来源:https://www.cnx-software.com/2026/10/31/arduino-uno-q-gets-a-10-1-inch-touch-display-with-integrated-speakers-audio-jacks-camera-connectors/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Waveshare UNO-Q-DSI-TOUCH-10.1A is a 10.1-inch touchscreen display designed for the Arduino UNO Q single board computer .
The Arduino UNO Q exposes its MIPI DSI interface through the 60-pin JMEDIA and JMISC headers, and for all practical purposes, you normally need a board like the Arduino UNO Media Carrier to make use of it. The UNO-Q-DSI-TOUCH-10.1A display solves that by integrating the headers so users can simply insert the Arduino UNO Q into it without an additional adapter board or special wiring.
Waveshare UNO-Q-DSI-TOUCH-10.1A specifications:
Multi-touch support Capacitive multi-touch (we’re told the actual number of touch points somehow depends on the software system) Interface I2C Tempered glass, optical bonding
Capacitive multi-touch (we’re told the actual number of touch points somehow depends on the software system)
Camera support – 22-pin CAMERA0 and CAMERA1 MIPI CSI connectors supporting IMX219 camera modules only.
Audio Built-in stereo speakers 2x 3.5 mm audio jacks (one audio out+mic, one audio output only)
2x 3.5 mm audio jacks (one audio out+mic, one audio output only)
Host Interface – Arduino UNO Q’s JMEDIA and JMISC board-to-board connectors
Power Supply 5V/3A via USB-C port on UNO Q 5V auxiliary power via USB-C on carrier board
5V auxiliary power via USB-C on carrier board
Dimensions – 239 x 147 x 19.11 mm (thickness excludes Arduino UNO Q)
Connecting the Arduino UNO Q to the display should be straightforward, and users just need to be attention to the board’s orientation and proper alignment with the JMEDIA and JMISC connectors.

Besides the integrated touchscreen display itself, the UNO-Q-DSI-TOUCH-10.1A also exposes two MIPI CSI camera connectors, two speakers, two audio jacks, and one RGB LED. Installation instructions, software configuration (e.g., the need to enable carrier board support in Arduino App Lab), and tips and tricks for all features are provided on the documentation website .
Waveshare UNO-Q-DSI-TOUCH-10.1A board also supports two cameras
While the official Arduino Media UNO carrier works with both the Arduino UNO Q and VENTUNO Q (whose price has recently been increased to $399 ), the Waveshare UNO-Q-DSI-TOUCH-10.1A only works with the UNO Q, and the company explicitly says the VENTUNO Q is not supported.
Waveshare sells the UNO-Q-DSI-TOUCH-10.1A for $80.09 on AliExpress and $69 .99 on its own store . If you don’t already own an Arduino UNO Q board, bundles are offered with the 2GB/16GB or 4GB/32GB variant of the SBC for $120 and up. The new touchscreen display kit may eventually also show up on the company’s Amazon store .
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Support CNX Software! Donate via cryptocurrencies , become a Patron on Patreon, or purchase goods on Amazon or Aliexpress . We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.
Pironman 5 Pro Max Review – A Raspberry Pi 5 Tower PC case with integrated video and audio capabilities, optional UPS kit
Arduino UNO Media Carrier adds MIPI CSI/DSI and audio connectors to UNO Q and VENTUNO Q boards
Pironman 5 Pro Max Raspberry Pi 5 case gains 4.3-inch touchscreen, camera mount, speakers, microphone, and more
ESP32-C5 devkit features 3.5-inch touch LCD, optional camera and battery
Building a NanoPi M4V2 based All-in-One Linux PC running Armbian (Ubuntu/Debian)