
经验是最好的老师。问问 [Jeneus],他在高中时尝试制作一个能下黑白棋的程序。结果并不理想。但多年以后,这一想法催生了一台令人印象深刻的黑白棋机器人。乍看之下,这台机器人有点像一台采用铝型材XYZ运动系统的3D打印机。但它的内涵远不止如此,更不用说下棋所需的软件了。请在下方视频中查看。
Z轴配有真空系统,可以吸取透明的棋子并放到棋盘上。如果你了解这个游戏,你可能记得在真实的棋盘上,玩家在“吃子”时需要翻转棋子。这台机器人则采用了一个更聪明的做法。棋子是透明的,因为它们由两种颜色之一的光源照亮。因此“翻转”棋子只需改变LED颜色即可。LED还会以另一种颜色闪烁,提示你可以落子的位置。
该装置使用了激光切割部件以及PLA和TPU材质的3D打印零件。当然,它还配有一台计算机——Raspberry Pi——用来通过摄像头“看见”棋盘。总体而言,这是一个完成度很高的项目。我们已经见过多台跳棋和国际象棋机器人。我们不禁好奇,其中一些是否也能下黑白棋?
本文来源:https://hackaday.com/2026/10/29/robot-picks-up-othello/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Experience is a great teacher. Ask [Jeneus], who, in high school, tried to make a program that played Othello. It didn’t go well. But years later, the idea produced an impressive Othello robot . At first glance, the robot looks a bit like a 3D printer with an aluminum extrusion XYZ motion system. But there’s a lot more to it, not to mention the software to play the game. Check it out in the video below.
The Z-axis has a vacuum system that can pick up clear tokens and place them on the board. If you know the game, you might remember that on a real board, players have to flip the tokens as they “capture” pieces. The robot has a smarter way to go. The tokens are clear because they are lit with one of two colors. So flipping the token is a simple LED color change. The LEDs also flash a different color to show you where you can move.

The device uses laser-cut components and 3D printed parts in PLA and TPU. Of course, there is a camera for the computer — a Raspberry Pi — to see the board. Overall, a very nicely done project. We’ve seen several checker and chess robots . We wonder if some of them could also play Othello ?