自动绕线机:让执行器线圈制作不再枯燥Automatic Coil Winder Takes The Tedium Out Of Actuators


AI free token/AI免费积分
自动绕线机:让执行器线圈制作不再枯燥

凡是自己做过电机的人都知道,绕线圈很快就会变成一件枯燥透顶的事;在 Larry 这里,问题甚至更严重——他正在自制一块翻点阵(flip-dot)显示屏,每个点要用两个电磁线圈去翻转点内的磁片。与其手工逐个绕线,他干脆自己做了一台绕线机。

这台绕线机使用两台步进电机:一台把线绕到线架上,另一台带动导纱 carriage 来回移动,把线均匀铺开在线架上。线架由挡圈固定,挡圈同时充当线头的扎线点。线盘架在一对轴承上转动,线从两块泡沫之间穿过以获得可调张力。外壳大部分是 3D 打印,再用金属杆、轴承与皮带传动补全结构。电子部分由一块 Teensy 控制,配 OLED 屏与旋转编码器进行操作。开始绕线前,机器先让导纱架撞上限位开关归零,然后逐层绕线,并记录已绕层数。

我们过去也见过几台绕线机,包括由 3D 打印机改装来绕定子的。想了解这台绕线机的用武之地,可以看看 Larry 的翻点阵设计。

文章配图

本文来源:https://hackaday.com/2026/10/23/automatic-coil-winder-takes-the-tedium-out-of-actuators/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Anyone who’s ever built their own motors knows how tedious winding the coils soon becomes; in [Larry]’s case, the issue was even worse. He’s building his own flip-dot matrix display, and each dot uses two electromagnetic coils to flip a magnet in the dot. Rather than wind each of these by hand, therefore, he built his own coil-winding machine.

The coil winder uses two stepper motors: one to wind wire onto the bobbin, and one to move the wire guide carriage back and forth, distributing the wire evenly across the bobbin. The bobbin is held in place by a retainer, which doubles as a tie point for the end of the wire. The spool of wire rotates on a pair of bearings, and the wire is fed between two pieces of foam to provide adjustable tension. The housing is mostly 3D-printed, with some metal rods, bearings, and belt drives fleshing out the structure. On the electronics side, a Teensy controls the winder, with an OLED display and a rotary encoder for control. Before beginning on a coil, it homes the guide carriage against an end-stop switch, then winds on layers, keeping track of the number of layers applied.

文章配图

We’ve seen a few coil winders here in the past, including a 3D printer adapted to winding stators. For more on this winder’s application, check out [Larry]’s flip-dot design.

Automatic Coil Winder Takes The Tedium Out Of Actuators

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry