ZOTAC ZBOX PRO CM5-PICO:基于树莓派 CM5 的无风扇工业迷你电脑ZOTAC ZBOX PRO CM5-PICO - A compact Raspberry Pi CM5-based fanless industrial mini PC


AI free token/AI免费积分
ZOTAC ZBOX PRO CM5-PICO:基于树莓派 CM5 的无风扇工业迷你电脑

ZOTAC ZBOX PRO CM5-PICO 是一台围绕树莓派计算模组 5(CM5)打造的紧凑型无风扇工业迷你电脑,最高配 16GB LPDDR4x 内存,可选 Wi-Fi 5 与蓝牙 5.0 无线连接。

这台迷你电脑尺寸为 114.8×76×31.3 毫米,配备两个 4K HDMI 输出、千兆以太网与用于 NVMe 存储或 AI 加速器的 M.2 扩展位,另有内部 40 针 GPIO 排针、摄像头接口,以及 5V-20V 宽压直流输入,面向工业自动化、数字标牌与 IoT 网关应用。所有 I/O 接口都排在机身同一侧,方便理线与堆叠安装。

主要规格:SoM 为树莓派 CM5;GPU 为 VideoCore VII @ 800MHz,带 H.265 硬件解码;内存 2/4/8/16GB LPDDR4x;存储 0GB(Lite)/16/32/64GB eMMC;M.2 2280 M-Key PCIe Gen2 x1 插槽可装 NVMe SSD 或 AI 加速器;2× HDMI 2.1,各支持 4K@60Hz;2× 内部 22 针 0.5mm 间距四通道 MIPI CSI-2/DSI 组合接口(也可接摄像头);千兆 RJ45 网口带 PTP 精确时间协议;可选高通 EG916Q-GL LTE Cat 1 bis 模组(M.2 3024 B-Key);2× USB 3.2 Type-A + 1× USB-C(固件更新用);内部 40 针树莓派 HAT/GPIO 排针;博通 SoC 内置看门狗;外部 I/O 口有 TVS 与 ESD 二极管保护;带 CM5 启动/EEPROM override 排针与 nRPIBOOT 恢复按钮;5V-20V 直流输入;体积 0.27 升;铝机身被动散热。

ZBOX PRO CM5-PICO 出厂搭载基于 Debian 13 的 Raspberry Pi OS,同时支持 Ubuntu for Raspberry Pi、Twister OS、Emteria Android、LibreELEC 与 Home Assistant OS,可直接使用树莓派软件生态、GPIO 库、摄像头接口与标准 Linux 开发工具。

文章配图

尽管这是 ZOTAC 首款基于树莓派 CM5 的工控机,ZBOX PRO CM5-PICO 面临的竞争已经不少:微雪 IPCBOX-CM5(双网口、RS485/RS232、CAN 总线与可选蜂窝)、EDATEC ED-IPC3100 系列(类似工业接口)等。与这些系统相比,ZOTAC 这款的差异点是双 4K HDMI、单侧面 I/O 布局与手掌大小的机身,瞄准数字标牌、HMI 与嵌入式计算场景。

ZOTAC 今年早些时候在 ISE 2026 上展示了 ZBOX PRO CM5-PICO。日本分销商 Ask Corporation 已上架该设备,但价格与供货需询价。ZOTAC 给出的产品供货生命周期长达 2036 年 1 月。随机附送主机、通用电源适配器、双 Wi-Fi 三频天线(无线型号)与 L 形安装套件含螺丝。

本文来源:https://www.cnx-software.com/2026/10/24/zotac-zbox-pro-cm5-pico-a-compact-raspberry-pi-cm5-based-fanless-industrial-mini-pc/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

ZOTAC ZBOX PRO CM5-PICO is a compact fanless industrial mini PC built around the Raspberry Pi Compute Module 5 (CM5) with up to 16 GB LPDDR4x memory, optional WiFi 5 and Bluetooth 5.0 wireless connectivity.

The mini PC measures 114.8 x 76 x 31.3 mm and features two 4K HDMI outputs, Gigabit Ethernet, and M.2 expansion for NVMe storage or AI accelerators, along with an internal 40-pin GPIO header, camera interfaces, and a wide 5V to 20V DC input for industrial automation, digital signage, and IoT gateway applications. All I\/O ports are placed on a single side to simplify cable management and stacking.

GPU - VideoCore VII @ 800 MHz with H.265 hardware video decoding

M.2 2280 M-Key PCIe Gen2 x1 socket for NVMe SSD or AI accelerator

2x internal 22-pin, 0.5mm-pitch, four-lane MIPI CSI-2\/DSI combo connectors

Camera - Same MIPI CSI-2\/DSI combo connectors can also be used for the camera

Gigabit Ethernet RJ45 port with PTP (Precision Time Protocol) support

Optional Quectel EG916Q-GL LTE Cat 1 bis Modem via M.2 3024 B-Key slot

USB – 2x USB 3.2 Type-A ports, 1x USB Type-C port for firmware updates

文章配图

CM5 boot\/EEPROM override header and nRPIBOOT recovery button

[caption id="attachment_178410" align="aligncenter" width="720"] ZOTAC ZBOX PRO CM5-PICO internal carrier board[\/caption]

The ZBOX PRO CM5-PICO ships with Raspberry Pi OS based on Debian 13, and also supports Ubuntu for Raspberry Pi, Twister OS, Emteria Android, LibreELEC, and Home Assistant OS. You can also use the Raspberry Pi software ecosystem, GPIO libraries, camera interfaces, and standard Linux development tools.

[caption id="attachment_178397" align="aligncenter" width="720"] ZOTAC ZBOX PRO CM5-PICO front and rear IO panels[\/caption]

[caption id="attachment_178396" align="aligncenter" width="720"] ZBOX PRO CM5-PICO top and bottom views showing the fanless aluminum enclosure[\/caption]

While it's the first Raspberry Pi CM5-based industrial computer from ZOTAC, the ZBOX PRO CM5-PICO already has plenty of competition, including the Waveshare IPCBOX-CM5 with dual Ethernet, RS485\/RS232, CAN Bus, and optional cellular connectivity, the EDATEC ED-IPC3100 series with similar industrial interfaces, and many more. Compared to those systems, the ZOTAC system features dual 4K HDMI, a single-sided external I\/O layout, and a palm-sized enclosure for digital signage, HMI, and embedded computing applications.

ZOTAC showcased the ZBOX PRO CM5-PICO at ISE 2026 earlier this year. Japanese distributor Ask Corporation lists the device, but needs to be contacted for pricing and availability. More details are available on the product page. ZOTAC also specifies a product supply lifecycle extending through January 2036. The device ships with the main unit, a universal AC adapter, dual Wi-Fi tri-band antennas (on wireless models), and an L-shaped mounting kit with screws.

ZOTAC ZBOX PRO CM5-PICO - A compact Raspberry Pi CM5-based fanless industrial mini PC

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry