ESP32-S3 + 1.3 英寸 OLED:DIY 一台能连 Wi-Fi 的迷你网络收音机ESP32-S3 + 1.3-inch OLED: DIY a Wi-Fi Mini Internet Radio


AI free token/AI免费积分
ESP32-S3 + 1.3 英寸 OLED:DIY 一台能连 Wi-Fi 的迷你网络收音机

Hackaday 消息,广播电台不如从前流行,MP3 播放器和音乐流媒体先后分流了听众。如果你两样都不感兴趣,不妨听听网络电台——用 CodersCafeTech 做的这台小玩意就行。

它是一台简单的桌面收音机,但不接收 AM/FFM 广播波段,而是伸出一根 2.4 GHz 天线,因为机内是一块自带 Wi-Fi 硬件的 ESP32-S3 开发板,可以连接互联网。板子通过 I2C 接了一块 1.3 英寸 OLED 显示屏,配合一个旋转编码器充当用户界面;声音部分由 MAX98357 I2C 音频放大器推动一只 3 瓦小喇叭。适当编程后,整机只需要一个 Wi-Fi SSID、密码和想听的网络电台 URL 就能工作。

Hackaday 往年也报道过不少网络收音机制作,包括此前号称最小的网络收音机,以及一台接上 Spotify 的 Macintosh SE/30。如果你也在折腾类似项目,欢迎投稿分享。

本文来源:https://hackaday.com/2026/10/21/building-a-simple-internet-radio/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

Broadcast radio isn't as popular as it once was, its popularity suffering in turn due to technologies like MP3 players and music streaming services. If you don't fancy either of those, you might like to listen to some internet radio stations, using a rig like the one CodersCafeTech built.

It's a simple desktop radio set, but instead of tuning in to AM or FM broadcast bands, it has an antenna for 2.4 GHz instead. That's because inside this radio is an ESP32-S3 development board, which is equipped with onboard WiFi hardware that lets it connect to the internet. It's hooked up to a 1.3-inch OLED display over I2C, which acts as a user interface in concert with a rotary encoder. Sound is handled with a MAX98357 I2S audio amplifier, hooked up to a small 3 W speaker. Once programmed appropriately, all the unit needs is a WiFi SSID and password, and the URL for the internet radio station you'd like to listen to.

ESP32-S3 + 1.3-inch OLED: DIY a Wi-Fi Mini Internet Radio

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry