
据 Hackaday 报道,从技术上说,让一架无人机飞起来只需要一台电机和一片螺旋桨,但现实中这样的配置几乎无法飞行。直升机因此需要在别处设置第二旋翼,为第一旋翼提供力矩平衡并实现转向。
当然,让单旋翼无人机飞行的办法有不少,但通常的妥协是使用非常大的螺旋桨以及其他机构,无人机的体积也随之变得非常大。Joshua Bird 不满足于此,他想要的是一架非常小的单螺旋桨无人机。
关键不仅在于极高的转速,还在于一个可操纵的铰接式桨毂:通过足够快地调整桨叶角度,同时控制俯仰与横滚。事实证明,使用不直接测量电机速度与位置、而是依赖反电动势估算的标准电调,这一点无法实现。
在最终原型中,这些参数必须被直接测量,对电机转速的超快调整也只能依靠定制控制器代码和大量反复试错。即便如此,无人机仍会频繁丢失位置估计而再次坠毁。最终的解决方案是在房间里增加一个红外信标,并在无人机上加装传感器,为其提供一个固定的参考点。
项目文件已在 GitHub 页面公开,后续改进方向包括为无人机加装扫描仪,使其能自主利用环境特征作为固定参考点——如果顺利,它甚至有可能飞到室外飞行,相当值得期待。
本文来源:https://hackaday.com/2026/10/17/building-a-flying-drone-with-a-single-propeller/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Technically all that you need in order to make a drone fly is a single motor and single propeller, but realistically it becomes basically impossible to fly it at that point. In the case of helicopters you therefore need a second rotor somewhere to provide counterbalance to the first and to be able to steer.
There are of course a number of ways to make a drone fly with a single helicopter, but the compromise usually is to use very large propellers, as well as other mechanisms that make for a very large drone. This wasn't good enough for Joshua Bird who wanted to have a very small, single propeller drone.

Key to making it work is not only a very high RPM, but also a hinged propeller hub that manipulates the angle of the blades in such a way that both pitch and roll can be controlled if you react quickly enough. This turned out to be impossible using standard motor ESCs that do not directly measure the motor's speed and position but rely on back EMF.
In the final prototype of the drone such details had to be measured directly, with super-fast adjustments to the motor's speed only possible with custom controller code and a lot of trial and error. Even then the drone would often lose track of its position and crash once more. The solution there was to add an infrared beacon in the room and a sensor on the drone, to give it a fixed reference point.
You can find the project files so far on the GitHub project page, with upcoming changes to the drone design involving improvements like adding a scanner to the drone so that it can autonomously use features in its environment as fixed reference points. That way it might conceivably be able to fly outside as well, which would be quite exciting to see.