
Seeed Studio(微雪电子)推出了 XIAO IPS 触摸显示屏系列——一族六款紧凑型开发板,围绕 XIAO ESP32-S3 Plus 或 XIAO nRF52840 Plus 微控制器构建,分别配备 0.96 英寸、1.14 英寸和 1.47 英寸 IPS 彩色显示屏。
全部六款板载均内置 6 轴 IMU(LSM6DS3)、PDM 数字麦克风、用户按键,并支持 LiPo 电池供电。其中较大的 1.47 英寸版本额外增加电容触摸与 microSD 卡槽;1.14 英寸型号则配备 Grove I2C 连接器,便于外接传感器。ESP32-S3 版本支持 Wi-Fi 与蓝牙 LE 连接,nRF52840 型号则聚焦低功耗蓝牙 LE 应用。该系列面向便携仪表盘、智能家居控制器、可穿戴设备、传感器监控及其他小型物联网项目。
显示规格方面:1.47 英寸为 172×320 分辨率(JD9853A 驱动)并支持电容触摸;1.14 英寸为 135×240(ST7789 驱动),无触摸;0.96 英寸为 80×160(ST7789 驱动),无触摸。三款均通过 SPI 接口驱动。
硬件细节上:ESP32-S3 Plus 采用双核 Tensilica LX7(最高 240 MHz,带 AI 加速向量指令)、8MB PSRAM、16MB SPI Flash,Wi-Fi 4 加蓝牙 5.0 LE/Mesh;nRF52840 Plus 为 Arm Cortex-M4F @ 64 MHz、1MB Flash、256KB SRAM,支持蓝牙 5.4、NFC 与 802.15.4。板载陶瓷天线、USB-C 供电与调试接口,ESP32-S3 版本提供 JTAG、nRF52840 版本提供 SWD。
功耗(活跃状态,非深度睡眠)上,0.96 英寸版本 ESP32-S3 为 159.76mA、nRF52840 为 28.69mA;1.14 英寸为 160.05mA 与 39.07mA;1.47 英寸为 130.53mA 与 83.32mA。整机尺寸最小仅 18.8×43.6×10.6mm(0.96 英寸版)。
软件层面,这些板卡可使用 Arduino IDE 编程,Seeed Studio 提供入门指南、显示示例以及麦克风、IMU、按键、电池监控和 MicroSD 存储的演示。ESP32-S3 版本使用 Seeed_GFX2 图形库,示例涵盖绘制图形、触摸输入、从 microSD 卡显示 BMP 图像、录制音频及基于运动的交互。原理图、KiCad 设计文件、3D 模型和出厂固件等文档可在 Wiki 获取,社区成员 Gokul 还设计了可免费 3D 打印的外壳。
价格上,XIAO IPS 显示屏系列在 AliExpress 售价 11.99 至 20.33 美元,Seeed Studio 官方商店为 15.90 至 19.90 美元。这也是继去年 12 月的 XIAO 电子纸 DIY 套件之后,Seeed 在小屏开发板领域的又一次矩阵式布局——此前同价位段还有 Waveshare ESP32-S3-LCD-1.28、Makerfabs 圆形 TFT 等竞品,XIAO IPS 系列的差异点在于预焊 XIAO 模组加矩形 IPS 屏加板载 IMU 与电池支持的一体化组合。
本文来源:https://www.cnx-software.com/2026/10/17/seeed-studio-xiao-ips-display-series-features-esp32-s3-or-nrf52840-soc-with-0-96-inch-to-1-47-inch-lcd-options/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Seeed Studio has introduced the XIAO IPS touch display series, a family of six compact development boards built around the XIAO ESP32-S3 Plus or XIAO nRF52840 Plus MCU, with 0.96-inch, 1.14-inch, and 1.47-inch IPS color displays.
All six boards include a 6-axis IMU, a PDM digital microphone, user buttons, and LiPo battery support. The larger 1.47-inch version adds capacitive touch and a microSD card slot, whereas the 1.14-inch model includes a Grove I2C connector for connecting external sensors. The ESP32-S3 versions support Wi-Fi and Bluetooth LE connectivity, while the nRF52840 models focus on lower-power Bluetooth LE applications. The boards are designed for portable dashboards, smart home controllers, wearable devices, sensor monitoring, and other small IoT projects.
XIAO IPS Display Series specifications:
Wireless board (one or the other)
XIAO nRF52840 Plus - Wireless MCU: Nordic nRF52840 Arm Cortex-M4F microcontroller at up to 64 MHz with 1 MB flash, 256 KB SRAM, Bluetooth 5.0, NFC, 802.15.4 connectivity. Storage: 2 MB onboard Flash. Wireless Connectivity: Bluetooth 5.4 (BLE), 802.15.4, and NFC. Antenna: Ceramic antenna. USB: USB 2.0 Type-C for power supply and console.
XIAO ESP32S3 Plus - SoC: Espressif ESP32-S3R8 with dual-core Tensilica LX7 microcontroller up to 240 MHz with vector instructions for AI acceleration, 8MB PSRAM. Wireless: WiFi 4 and Bluetooth 5.0 LE plus Mesh connectivity. Storage: 16MB SPI flash, MicroSD card socket. Antennas: IPEX1 antenna for Wi-Fi and Bluetooth. USB: USB 2.0 Type-C for power supply and console.
Storage: MicroSD card slot (1.47-inch model only)
Display: 1.47-inch with 172 x 320 resolution (JD9853A driver) and capacitive touch support; 1.14-inch with 135 x 240 resolution (ST7789 driver), no touch; 0.96-inch with 80 x 160 resolution (ST7789 driver), no touch. Interface: SPI.
Audio: Onboard PDM digital microphone
Sensors: Onboard 6-axis IMU (LSM6DS3) for motion sensing, orientation, and wake-on-motion
Expansion: I2C and I2S interfaces through expansion pads (1.14-inch model only); additional GPIO access through expansion pads.
Debug interface: JTAG (ESP32-S3) or SWD (nRF52840)
Misc: Physical slide power switch (ON/OFF); 2x push buttons (1.47-inch and 0.96-inch variants only); 3x push buttons (1.14-inch variant only); exposed user-button pads (1.47-inch and 1.14-inch variants only); touch interrupt and motion detection support.
Power Supply: 5V via USB-C port; 3.7V LiPo battery through a 2-pin JST connector; battery voltage monitoring on both controller variants; battery status detection on nRF52840 models.
Power Consumption (Active, not deep sleep): 0.96-inch with ESP32-S3 at 159.76mA and nRF52840 at 28.69mA; 1.14-inch with ESP32-S3 at 160.05mA and nRF52840 at 39.07mA; 1.47-inch with ESP32-S3 at 130.53mA and nRF52840 at 83.32mA.
Dimensions: 1.47-inch at 26.4 x 51.4 x 12.6 mm; 1.14-inch at 26 x 48 x 10.6 mm; 0.96-inch at 18.8 x 43.6 x 10.6 mm.
So the main difference between the two variants is wireless connectivity and power consumption. The ESP32-S3 Plus variant features Wi-Fi connectivity, making it suitable for connected dashboards, smart home controllers, and IoT applications. The nRF52840 Plus variant supports BLE connectivity and lower power consumption, making it better suited for battery-powered wearables and portable devices.
On the software side, the boards can be programmed using the Arduino IDE. Seeed Studio provides getting-started guides, display examples, and demonstrations for the microphone, IMU, buttons, battery monitoring, and MicroSD storage. The ESP32-S3 version uses the Seeed_GFX2 graphics library, with examples for drawing graphics, touch input, displaying BMP images from a microSD card, recording audio, and motion-based interactions. Additional documentation, including schematics, KiCad design files, 3D models, and factory firmware, is also available through the Wiki. Finally, a free 3D-printable case designed by community member Gokul is also available.
We have previously written about plenty of small display development boards, including Seeed's own Round Display for XIAO, the XIAO ePaper DIY Kit based on the same nRF52840 Plus, but it drives an e-ink panels, there's also Waveshare's ESP32-S3-LCD-1.28 and ESP32-S3-Touch-LCD-1.47 boards, Makerfabs' ESP32-S3 Round SPI TFT 1.28-inch, and similar RP2350/ESP32-C6 1.28-1.47-inch LCD kits. Compared to all of that, the XIAO IPS Display series is a little different, as it combines a pre-soldered XIAO nRF52840 Plus with a rectangular IPS display in 0.96-, 1.14-, and 1.47-inch sizes, plus onboard IMU and battery support.
The Seeed Studio XIAO IPS display series is available for $11.99 to $20.33 on AliExpress, as well as on the Seeed Studio Store for $15.90 to $19.90.