IT之家 10 月 16 日消息,据韩国媒体 ZDNet 昨日(10 月 15 日)报道,为了降低对单一供应商的依赖,三星正考虑为 Galaxy 手机的 OLED 表明驱动芯片(DDI)引入第二家代工合作伙伴,美国晶圆代工厂格芯(GlobalFoundries)成为主要评估对象。
IT之家注:表明驱动芯片(Display Driver IC,简称 DDI)把处理器送来的图像数据,转换成显示屏每个像素能理解的电压、电流和时序信号,从而决定画面亮什么、暗什么、表明什么颜色,因而可视为手机显示屏的“交通指挥平台”。
在 OLED 手机中,DDI 尤其关键。OLED 像素自发光,DDI 需要精确控制每个像素的电流和灰度,以达成高比较度、广色域、高刷新率,同时尽量降低功耗。三星的移动 DDI 还兼容可变刷新率,例如在 1Hz 至 144Hz 之间动态调整,以在流畅滚动、游戏和静态画面之间平衡感受与电池续航。
报道指出,由于 Galaxy Z Fold8 市面需要超出预期,三星此前联系联华电子(UMC,下文简称联电)要求追加生产 DDI,但联电的 22 纳米 DDI 产线已满负荷运转,无法承接紧急订单。这直接导致三星不得不削减 Z Fold8 部分零部件的 9 月生产计划,并顺延至 10 月,拖累了出货节奏与营收表现。
为此三星考虑打破 Galaxy OLED 手机 DDI 由联电独家代工的格局,避免再度浮现类似生产瓶颈,消息称三星正在考察格芯位于新加坡和德国的 22 纳米、28 纳米生产设施。
若合作落地,格芯代工的 DDI 芯片最快可能在 2027 年底进入 Galaxy 手机供应链,并率先用于搭载 OLED 显示屏的中低端 Galaxy A 系列机型。三星当下尚未正式公布相关供应安排,格芯能否取得订单仍取决于产能、良率、成本及认证测试等因素。
本文来源:https://www.ithome.com/1/013/744.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
IT House October 16 news, according to South Korean media ZDNet reported yesterday (October 15), in order to reduce the dependence on a single supplier, Samsung is considering the introduction of a second foundry partner for the OLED of Galaxy phones, the driver chip (DDI), and the US wafer foundry GlobalFoundries has become the main evaluation object.
IT Home Note: It indicates that the display driver IC (DDI) converts the image data sent by the processor into voltage, current, and timing signals that can be understood by each pixel of the display screen, thereby determining what is bright, dark, and what color to indicate. Therefore, it can be regarded as the "traffic command platform" of the mobile phone display.
DDI is especially critical in OLED phones. OLED pixels are self-luminous, and DDI needs to precisely control the current and grayscale of each pixel to achieve high contrast, wide color gamut, and high refresh rate, while minimizing power consumption. Samsung's mobile DDI is also compatible with variable refresh rates, such as dynamically adjusting between 1Hz and 144Hz to balance between smooth scrolling, gaming, and stills with battery life.

The report pointed out that as the Galaxy Z Fold8 market needs to exceed expectations, Samsung previously contacted UMC (hereinafter referred to as UMC) to request additional production of DDI, but UMC's 22-nanometer DDI production line has been running at full capacity and cannot accept emergency orders. This directly caused Samsung to cut production plans for some parts of the Z Fold8 in September and postpone them to October, dragging down the pace of shipments and revenue performance.
To this end, Samsung is considering breaking the pattern of Galaxy OLED mobile phone DDI exclusive foundry by UMC to avoid similar production bottlenecks, and it is reported that Samsung is inspecting GF's 22-nanometer and 28-nanometer production facilities in Singapore and Germany.
If the cooperation is implemented, GF OEM's DDI chip may enter the Galaxy mobile phone supply chain as soon as the end of 2027, and will be the first to be used in the low-end Galaxy A series models with OLED displays. Samsung has not yet officially announced the relevant supply arrangements, and GF's ability to obtain orders still depends on factors such as production capacity, yield, cost, and certification testing.
This article is from: https://www.ithome.com/1/013/744.htm For copyright issues, please write to: 13951431913#139.com or submit a review on the right.