为 Soonpho M7 云台自制控制器:ESP32-S3 加 NRF24L01 实现精准定位与矢量运镜Building An M7 Pan Tilt Head Controller


AI free token/AI免费积分
为 Soonpho M7 云台自制控制器:ESP32-S3 加 NRF24L01 实现精准定位与矢量运镜

Soonpho M7 全景云台是一款实用的摄影工具,可以远程瞄准一台体积不小的相机。但 [Kyle Housley] 希望获得比出厂方案更多的控制能力,于是他自制了一台控制器。

该项目以 ESP32-S3 为核心,搭配 NRF24L01 无线模块。ESP32-S3 连接电脑,通过串口接收指令,决定云台该如何运动;随后再通过 NRF24L01 将指令无线发送给另一个被改装进 M7 原装控制器的 NRF24L01 模块。借此,它可以命令 M7 移动到指定的平移与俯仰位置,或沿矢量路径做平滑运动,还能在需要时触发相机快门,拍下正在观看的画面。

[Kyle] 用这套装置打造了一套飞机摄影运动跟踪系统:笔记本上运行 Yolo 视觉模型,云台可受控跟踪掠过的飞机,并在飞机进入画面时自动拍摄。这套配置相当流畅——编辑部甚至期待能看到用 ADS-B 数据辅助的版本,或许再加上自动图像标记与上传。

项目代码已公开在 Codeberg 平台上,任何想改造电动云台的摄影爱好者都可以参考。

本文来源:https://hackaday.com/2026/10/15/building-an-m7-pan-tilt-head-controller/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

The Soonpho M7 Pan Tilt Head is a useful photography tool for remotely aiming a decently-sized camera. Only, Kyle Housley wanted a little more control than was available out of the box. Hence, he built a custom controller that could deliver just that.

Building An M7 Pan Tilt Head Controller

The project is based around an ESP32-S3 paired with an NRF24L01 wireless module. The ESP32-S3 is hooked up to a computer to receive commands over serial on what movements to make. It then transmits over the NRF24L01 to another NRF24L01 module that has been hacked into the original M7's controller. In doing so, it can command the M7 to move to a given specific pan and tilt position, or to make a smooth motion along a vector. It can also trigger shutter release in the attached camera as needed, to capture whatever is being looked at.

Kyle has used this rig to create a motion tracking system for aircraft photography. With a Yolo vision model running on a laptop, the pan-tilt head can be commanded to track aircraft passing by and photograph them when they're in frame. It's a pretty slick setup; we'd love to see similar done with the aid of ADS-B data, too - perhaps even with automatic image tagging and upload.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry