Bitmerse 在 Crowd Supply 上发起了一款名为 Romu 的超小尺寸 USB 开发板众筹:整板仅 15.5×12mm,一面是 USB 2.0 接口,另一面是双核 Cortex-M33/RISC-V 架构的树莓派 RP2354A MCU,外加若干调试/编程焊盘、按钮和一颗 RGB LED。

Romu 没有引出任何 GPIO,主要面向 USB 类应用:无密码登录的安全密钥、USB MIDI 控制器、宏键盘或自定义 HID 设备等。它可以直插电脑主机闲置的 USB Type-A 口,无需任何线材、面包板或转接器。
规格方面,RP2354A 可在任意时刻使用两个核心(2× Arm、2× RISC-V 或 1×1 混合):Arm 侧为双核 Cortex-M33 @ 150 MHz(带 TrustZone、安全启动),RISC-V 侧为双核 32 位 Hazard3 @ 150 MHz;520 KB 片上 SRAM,2MB 堆叠(封装内)flash。板载原生 USB 2.0 Full-Speed 接口,支持 USB DFU 或 SWD 测试点烧录调试,并配有一颗电容触控按键。整板 5V 取自 USB、板载稳压至 3.3V,尺寸 15.5×12×1.65mm。

Romu 出厂预装 MicroPython,插上电脑即可用 Thonny IDE 等工具开始编程;高级用户还可选配一个通过 USB-C 连接的编程调试夹具,引出标准 20 针 JTAG 接口用于 SWD 调试,并暴露 UART RX/TX 引脚。硬件完全开源,Bitmerse 将在 GitHub 公开原理图、PCB 设计文件、BOM 和 3D 外壳 STL,目前已放出的 MicroPython 示例包括恐龙游戏、FIDO2 安全密钥实现和网站启动器演示。
算上 2018 年的 Tomu、Fomu、Somu、Qomu 和今年 8 月的 Comu,"omu"家族又添新丁。Romu 的早鸟价为 40 美元起,选配编程夹具加 65 美元,运费美国 8 美元、其他地区 18 美元,预计 2027 年 4 月底前发货。
本文来源:https://www.cnx-software.com/2026/10/14/romu-tiny-raspberry-pi-rp2354a-usb-board/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
Bitmerse Romu is a tiny (15.5 x 12 mm), almost minimal Raspberry Pi RP2354A USB board with a USB 2.0 interface on one side of the PCB, and the dual Cortex-M33/RISC-V MCU on the other side, connected to a few debugging/programming pads, buttons, and an RGB LED.
It doesn't come with any GPIO, and it's mostly designed for USB applications such as a security key for passwordless login, a USB MIDI controller, a macro pad, or a custom HID device. You can plug it directly into a spare USB Type-A port of your computer/host without any cables, breadboard, or adapters required.
The board is built around the Raspberry Pi RP2354A with a dual-core Arm Cortex-M33 @ 150 MHz with Arm TrustZone and secure boot, alongside a dual-core 32-bit RISC-V Hazard3 @ 150 MHz. Up to two cores can be used at a time, either 2x Arm, 2x RISC-V, or 1x Arm + 1x RISC-V. It features 520 KB on-chip SRAM and 2MB of stacked in-package flash memory. Other features include a native USB 2.0 Full-Speed interface, USB DFU or SWD test points for programming and debugging, UART TX/RX test points, a capacitive touch button, a boot button, an RGB LED, and a 3D-printed protective shim. Power comes from 5V over USB, regulated to 3.3V onboard, and the board measures 15.5 x 12 x 1.65 mm.

It comes preloaded with MicroPython, and you can plug straight into any USB Type-A port and start coding in the Thonny IDE or another IDE. Advanced users can also get an optional programming and debugging jig that connects over USB-C and provides access to a standard 20-pin JTAG connector for SWD debugging, and exposes UART RX/TX pins.
The board is fully open-source hardware, and Bitmerse will release the schematics and PCB design files, bill of materials and 3D enclosure STL files on GitHub. Some example MicroPython scripts are already available there, including a dino game, a FIDO2 security key implementation, and a website launcher demo.

We've seen many of these "omu" boards over the years, starting in 2018 with the Tomu, followed by the Fomu, Somu, Qomu, and Comu. Romu is the first "omu" board from Bitmerse. The company has launched the Romu RP2354A board on Crowd Supply with a $5,000 funding target. The board starts at $40, and the optional programming jig adds $65. Shipping is expected to start by the end of April 2027.