IT之家 10 月 12 日消息,奇瑞汽车昨晚发布说明,近日,马来西亚发生一起 2023 款 OMODA 5 的车辆难题,未涉及人身伤害。
经调查,该批次车辆可能存在后桥纵臂局部焊接位置焊接强度不足,极端情况下存在焊缝撕裂风险。该结构车型此前已停产。奇瑞马来西亚子公司配合 JPJ(马来西亚陆路交通局)的相关安排,已对受影响的 OMODA 5 车型启动召回。
奇瑞汽车表示,本着审慎原则,已启动国内及相关市面同批次 OMODA 5 车型的风险专项排查,并与监管机构保持积极沟通。
据介绍,此次排查为预防性主动安排,奇瑞将依据排查结果,以负责任的态度,及时向社会公布。
IT之家附说明全文如下:
关于马来西亚 OMODA 5 车辆难题的说明
近日,马来西亚发生一起 2023 款 OMODA 5 的车辆难题,未涉及人身伤害。奇瑞汽车高度重视,第一时间开展原因调查,积极与马来西亚陆路交通局(JPJ)等当地政府监管机构密切沟通。
经调查,该批次车辆可能存在后桥纵臂局部焊接位置焊接强度不足,极端情况下存在焊缝撕裂风险。该结构车型此前已停产。奇瑞马来西亚子公司配合 JPJ 的相关安排,已对受影响的 OMODA 5 车型启动召回,对相关零部件开展检查,并视情况免费更换。
本着审慎原则,公司已启动国内及相关市面同批次 OMODA 5 车型的风险专项排查,并与监管机构保持积极沟通。此次排查为预防性主动安排,奇瑞将依据排查结果,以负责任的态度,及时向社会公布。
由此给使用者带来的不便,笔者深表歉意。
奇瑞汽车股份有限公司
2026 年 10 月 11 日
本文来源:https://www.ithome.com/1/011/718.htm
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
IT House news on October 12th, Chery Motors released instructions last night. Recently, there was a vehicle problem with the 2023 OMODA 5 in Malaysia, and no personal injury was involved.
After investigation, the batch of vehicles may have insufficient welding strength at the local welding position of the rear axle longitudinal arm, and there is a risk of weld tearing in extreme cases. The structural model was previously discontinued. Chery Malaysia has initiated a recall of affected OMODA 5 models in conjunction with arrangements with JPJ (Land Transport Authority of Malaysia).
Chery Automobile said that in line with the principle of prudence, it has launched a special investigation into the risks of the same batch of OMODA 5 models in domestic and relevant markets, and maintains active communication with regulatory authorities.
According to reports, this screening is a preventive and proactive arrangement, and Chery will timely announce it to the public in a responsible manner based on the results of the screening.
The full statement accompanying the IT Home is as follows:
Explanation of OMODA 5 Vehicle Challenges in Malaysia
Recently, there was a vehicle problem with the 2023 OMODA 5 in Malaysia, which did not involve personal injury. Chery Motor attaches great importance to the investigation of the cause in the first place, and actively communicates with local government regulators such as the Malaysian Land Transport Authority (JPJ).

After investigation, the batch of vehicles may have insufficient welding strength at the local welding position of the rear axle longitudinal arm, and there is a risk of weld tearing in extreme cases. The structural model was previously discontinued. Chery Malaysia, in cooperation with JPJ, has initiated a recall of affected OMODA 5 models, inspected the relevant parts and replaced them free of charge as appropriate.
In accordance with the principle of prudence, the company has launched a special risk investigation of the same batch of OMODA 5 models in domestic and relevant markets, and maintains active communication with regulatory authorities. This screening is a preventive and proactive arrangement, and Chery will timely announce it to the public in a responsible manner based on the results of the screening.
I apologize for any inconvenience this may have caused.
Chery Automobile Co., Ltd.,
October 11, 2026
This article is from: https://www.ithome.com/1/011/718.htm For copyright issues, please write to: 13951431913#139.com or submit a review on the right.