
我们此前介绍过 GeekMagic 的 SmallTV 系列产品——这些廉价小玩意把微控制器和显示屏装进一个小塑料外壳,可以用来显示时间或天气。它们由 ESP8266 或 ESP32 驱动,若不是外壳做工相当专业,很容易被当成爱好者自制的小玩意。事实上,如果 GeekMagic 是从某个现有 DIY 项目借鉴了创意,我们也不会感到意外。
正如你可能预料的,我们已经见过好几款针对这些设备的改造,通常做法都是替换原厂固件。但最新的这个方法很特别:你既不用折腾原厂软件,也无需动用电烙铁。Yongha Kim 利用 SmallTV 内置的相册功能,展示了如何让这个小玩意显示几乎任何你想要的内容。
其中的技巧在于:图像由网络上的某台机器(比如你的台式机或服务器)生成,然后通过 HTTP 推送到 SmallTV。在这个示例中,图像是用 Python 的 Pillow 库生成的,Yongha 让它显示 Claude 和 Codex 的用量数据,不过你完全可以用自己喜欢的任何方式来实现。
你只需要生成一张 240×240 的图像,然后发给设备即可,因此可以自由设计任何想要的视觉效果。它甚至支持 GIF,如果你想加入动画也没问题。内容当然可以是任何你想展示的信息,生成方式也可以是你最熟悉的任何编程语言或工具。这是一个很妙的 proof of concept,既然方法已经被验证,我们很期待社区能把它推进到什么程度。
如果你觉得这太简单了,别担心。要是你打算彻底替换设备固件,还有一个足够深的兔子洞等着你去探索。
本文来源:https://hackaday.com/2026/10/06/smalltv-hacking-with-surprisingly-little-fuss/
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
We've previously written about GeekMagic's SmallTV product line—cheap little devices that pack a microcontroller and display into a small plastic case, useful for showing the time or weather. They are driven by ESP8266 or ESP32 chips, and if not for the fairly professional-looking enclosure, you'd easily mistake them for hobbyist homemade gadgets. In fact, we wouldn't be surprised if GeekMagic borrowed inspiration from an existing DIY project.
As you might expect, we've seen several mods for these devices, typically involving replacing the stock firmware. But this latest approach is special: no tinkering with the original software, and no soldering iron required. Yongha Kim leveraged the SmallTV's built-in photo album feature to demonstrate how to get this little device to display virtually anything you want.
The trick is this: an image is generated by a machine on the network (such as your desktop or server), then pushed to the SmallTV via HTTP. In this example, the images are generated using Python's Pillow library, with Yongha displaying usage data for Claude and Codex—but you can obviously achieve the same result with whatever method you prefer.
All you need to do is generate a 240×240 image and send it to the device, so you're free to design any visual effect you want. It even supports GIFs if you'd like to add animation. The content can be anything you want to display, and the generation method can be any programming language or tool you're most comfortable with. This is a clever proof of concept, and now that the method has been validated, we're eager to see how far the community takes it.
If you think that's too easy, don't worry. Should you intend to completely replace the device firmware, there's still a rabbit hole deep enough to explore.