本文来源:https://mp.weixin.qq.com/s/1Itdvnuz_nIitqsfU4iXUg
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

适用于 Kindle 7(KT2 / WP63GW)· 固件 5.12.2.2
从 WinterBreak2 越狱、Hotfix / KUAL / FBInk 环境搭建,到离线农历日历生成、KUAL 插件化与每日自动刷新
设备 | Kindle 第 7 代基础版(KT2 / WP63GW) |
固件 | 5.12.2.2 |
显示屏 | 6 英寸 E-ink,600 × 800 |
目标 | 离线农历 + 第几周 + 节气 + 月历 + 极低功耗 |
整理日期:2026 年 9 月
1. 项目概述
本指南整理了一套针对Kindle 7 的完整改造路径:先借助 WinterBreak2 取得可运行第三方代码的环境,再安装 Hotfix、MRPI、KUAL 与 FBInk,最后部署一个专为 600×800 电子墨水屏打造的离线农历日历。日历程序不依赖浏览器与持续联网,而是预先生成每天的静态黑白页面,设备端只负责按日期取图、刷屏、休眠以及次日唤醒。
● | 核心外观原则电子墨水屏维持画面几乎不需要持续刷新,因而真正的省电关键是让 CPU、Wi-Fi 和 Kindle 原生界面绝大部分时间处于休眠或停止状态。 |
WinterBreak2越狱 | Hotfix | MRPI | KUAL | FBInk | 日历插件 | 每日 RTC自动刷新 |
2. 目标设备与软件环境
项目 | 本项目规格 | 说明 |
机型 | Kindle 7 / KT2 | 背板型号 WP63GW |
平台 | 5.12.2.2 | 合适使用 WinterBreak2 路线 |
表明 | 600 × 800,黑白 E-ink | 日历图片按原生分辨率生成 |
前光 | 无 | 作为桌面日历时结构更简单 |
插件入口 | KUAL | 负责展示“预览 / 自动日历”等菜单 |
显示屏绘制 | FBInk | 直接向 framebuffer 绘制图片 |
日历数据 | 2026-2035 预生成 | 公历、农历、周数、节气、节日等全部离线 |
3. 正常越狱流程
建议按下列顺序完成环境搭建。每一步做完后再进入下一步,无需一次性安装所有组件。
3.1 WinterBreak2
1. 下载 WinterBreak2 发布包
下载发布版本的 wb2.zip。
参考:WinterBreak2 官方教程
2. 复制到 Kindle 根目录
将把 wb2.zip 解压后的内容直接复制到 USB 连接后 Kindle 的最外层目录,注意不要额外再套一层 wb2 文件夹。
Kindle/├── documents/├── jb.sh├── patchedUks.sqsh└── winterbreak2/└── dialoger.html
3. 执行越狱
安全弹出随后在 Kindle 浏览器中按 WinterBreak2 页面给出的方式运行 Jailbreak,完成后进入后续 Hotfix 安装步骤。
3.2 Universal Hotfix
Hotfix 用来补齐并维持越狱环境,是后续 KUAL 等组件正常工作的基础。把 Update_hotfix_universal.bin 放到 Kindle 根目录,再借助 Kindle 的“更新您的 Kindle”执行。安装完成后,如果书库里出现 Run Hotfix,运行一次即可。
参考:KindleModding Universal Hotfix
3.3 MRPI(MR Package Installer)
MRPI 不需要走平台更新安装,直接把压缩包中的 extensions 与 mrpackages 目录合并到 Kindle 根目录即可。
Kindle/├── extensions/│ └── MRInstaller/└── mrpackages/
安装后,放入mrpackages 里的第三方 .bin 包可通过 Kindle 搜索框执行以下命令安装:
;log mrpi
参考:MobileRead MR Package Installer
3.4 KUAL
KUAL 是 Kindle 上的扩展菜单。针对 5.12.2.2 固件,使用 Booklet 版 KUAL,把对应的 Update_KUALBooklet_..._install.bin 放进 mrpackages,再运行 ;log mrpi。安装完成后,书库中应出现 KUAL。
参考:KUAL 官方社区帖
3.5 FBInk
FBInk 用于在 Kindle 电子墨水屏上直接绘制文本或 PNG 图片。对本项目而言,建议把可执行文件统一放到 /mnt/us/extensions/FBInk/bin/fbink,方便日历脚本自动定位。
Kindle/└── extensions/└── FBInk/└── bin/└── fbink
参考:FBInk Kindle 发布帖(MobileRead)
● | 完成标志KUAL 能够正常打开,并可通过测试插件调用 FBInk 在屏幕上打出 “FBInk OK”,即可进入日历程序部署阶段。 |
4. 日历程序需要外观
日历程序的目标不是做一个持续运行的网页应用,而是把Kindle 变成一台“每天只工作一次”的电子纸日历。最终页面包含以下信息:
·公历:年、月、日与星期;
·ISO 第几周:按周一作为每周第一天计算;
·农历:农历月份与日期;
·干支与生肖年份;
·二十四节气与距离下一节气的天数;
常见传统节日提示;
·完整月历,当天日期做高亮显示;
·完全离线,不依赖 Google Calendar、浏览器或网络 API。
4.1 为什么使用“预生成图片”而不是 Kindle 上实时绘制
Kindle 7 的运行环境较旧,中文字体、Python 依赖、农历算法和复杂排版都会抬高部署难度。因此本项目把计算量放到电脑端:用 Python 预先生成 2026-2035 每一天的 600×800 黑白 PNG,Kindle 端只根据系统日期找到当天图片,再交给 FBInk 显示。
阶段 | 执行位置 | 主要任务 |
数据计算 | 电脑端 Python | 公历、农历、ISO 周数、节气、节日 |
页面生成 | 电脑端 Python + Pillow | 生成 600×800 1-bit 黑白 PNG |
运行表明 | Kindle | 按日期取图→ FBInk 全屏显示 → RTC 休眠/唤醒 |
4.2 页面布局
页面按照按 Kindle 7 原生 600×800 分辨率设计。上半部分突出当前日期,中部展示农历与节气信息,下半部分是完整月历,当天用黑底白字突出。
图 1 日历页面示例(600 × 800 黑白)
5. 日历程序开发
5.1 电脑端:日期与农历数据
电脑端脚本首先遍历目标日期范围。公历信息直接使用datetime/calendar;ISO 周数取自 isocalendar().week;农历借助 1900-2100 年农历数据表做公历转农历;二十四节气按年度生成日期映射;传统节日按公历与农历的固定日期表匹配。
for day in every_day("2026-01-01", "2035-12-31"): solar = get_solar_date(day) week_no = day.isocalendar().week lunar = solar_to_lunar(day) term = get_solar_term(day) festival = get_festival(day) render_600x800_png(...)
5.2 电脑端:生成电子墨水页面
使用用 Pillow 创建一张 600×800 的 1-bit 黑白图像。页面里的所有中文都在电脑端完成栅格化,因此 Kindle 上不需要额外的中文字体。图片按“年/月/日期”层级保存,方便 Shell 脚本直接定位。
images/├── 2026/│ ├── 01/│ │ ├── 2026-01-01.png│ │ └── ...│ └── 09/│ └── 2026-09-02.png└── ...└── 2035/
5.3 Kindle 端:KUAL 插件结构
日历作为一个标准KUAL 扩展放在 extensions/calendar 目录中。config.xml 负责声明扩展并加载 menu.json;menu.json 定义使用者可见菜单;bin 目录存放显示、预览、休眠与自动运行脚本;images 目录保存预生成页面。
Kindle/└── extensions/└── calendar/├── config.xml├── menu.json├── config.sh├── bin/│ ├── render.sh│ ├── preview.sh│ ├── start.sh│ ├── daemon.sh│ └── stop.sh├── images/└── logs/
5.4 render.sh:按日期显示当天页面
render.sh 读取 Kindle 当前系统日期,拼出当天 PNG 的路径,找到 FBInk 可执行文件后执行全屏刷新。核心逻辑非常简单:
TODAY="$(date +%Y-%m-%d)"Y="$(date +%Y)"M="$(date +%m)"IMG="$BASE/images/$Y/$M/$TODAY.png"FBINK -c -f -w -g "file=$IMG"
5.5 自动模式:每日 00:05 刷新
自动模式启动后,日历程序停止Kindle 原生界面,关闭 Wi-Fi,显示当前日期,再借助 RTC 设置下一次唤醒时间并进入 suspend。到了 00:05,Kindle 自动唤醒,读取新一天的图片、刷屏,随后再次进入休眠。
启动自动日历↓停止 framework / lab126_gui↓关闭 Wi-Fi↓FBInk显示当天PNG↓rtcwake -m mem → 休眠到下一次 00:05↓RTC 唤醒↓显示新一天→再次休眠
5.6 短按电源键退出自动日历
最终版本将系统把“提前于计划 RTC 时间唤醒”视作使用者主动操作。自动日历休眠期间短按一次电源键,设备会被提前唤醒;程序检测到距离计划唤醒时间还早之后,就退出日历循环并重新拉起 Kindle 原生界面。
● | 日常使用感受平时屏幕一直停留在当天日历上,每天凌晨自动更新一次。如果临时想看书,只需短按一次电源键即可退出专用日历模式,恢复正常 Kindle。 |
6. 日历插件安装与使用
6.1 复制文件
将完整日历包解压到 Kindle USB 根目录,使最终路径满足:
Kindle/extensions/calendar/config.xmlKindle/extensions/calendar/menu.jsonKindle/extensions/calendar/bin/Kindle/extensions/calendar/images/
同时确认 FBInk 位于:
Kindle/extensions/FBInk/bin/fbink
6.2 KUAL 菜单
重新打开打开 KUAL 后,进入“极低功耗农历日历”。建议按以下顺序使用:
1. 预览今天 15 秒
确认当天页面排版与FBInk 显示正常。
2. 测试休眠 2 分钟
确认设备能够在显示日历之后进入休眠,并由 RTC 自动唤醒。
3. 启动自动日历
进入专用日历模式,每天 00:05 自动更新。
4. 短按电源键
需要使用Kindle 需要阅读时,短按电源键即可退出日历并恢复原生界面。
6.3 修改每日刷新时间
默认刷新时间为每天如果不是默认的 00:05,可在 config.sh 中修改:
WAKE_HOUR=0WAKE_MINUTE=5
例如改成每天 01:10 更新:
WAKE_HOUR=1WAKE_MINUTE=10
7. 低功耗外观说明
这套思路的低功耗来自“尽量减少活跃时间”,而不是单纯压低显示屏亮度。Kindle 7 本身没有前光,因而格外适合作为电子墨水日历。
耗电来源 | 处理方式 | 结果 |
E-ink 画面保持 | 不连续刷新 | 日历可长时间停留在显示屏上 |
Wi-Fi | 自动模式关闭 | 避免后台联网耗电 |
Kindle GUI | 专用日历模式下停止 | 减少平台界面与后台活动 |
日历计算 | 电脑端提前完成 | Kindle 不运行 Python/农历算法 |
显示屏更新 | 每天一次 | 刷新次数极少 |
CPU | 绝大多数时间 suspend | 只有换日时短暂工作 |
8. 最终目录与组件关系
Kindle/├── extensions/│ ├── MRInstaller/│ ├── FBInk/│ │ └── bin/fbink│ └── calendar/│ ├── config.xml│ ├── menu.json│ ├── config.sh│ ├── bin/│ ├── images/│ └── logs/├── mrpackages/└── documents/
组件 | 作用 | 是否日常运行 |
WinterBreak2 | 完成越狱 | 否,只在越狱阶段使用 |
Universal Hotfix | 维护越狱运行环境 | 后台基础环境 |
MRPI | 安装 Kindle 第三方 .bin 包 | 需要安装包时使用 |
KUAL | 给出图形化扩展菜单 | 启动/管理日历时使用 |
FBInk | 直接刷新 E-ink framebuffer | 每天刷新时短暂调用 |
Calendar 插件 | 选图、显示、休眠和自动唤醒 | 自动模式核心 |
9. 项目成果与使用方式总结
完成以上流程后,这台Kindle 7 将同时保留正常阅读能力和专用日历模式。进入自动日历后,屏幕持续显示当天日期、农历、ISO 周数、节气和月历,每天仅在换日时短暂唤醒并刷新一次;需要恢复阅读时,短按电源键退出日历即可。
● | 最终思路一句话越狱后的Kindle 7 不运行常驻网页,而是走“预生成静态日历 → FBInk 刷屏 → RTC 深度休眠 → 每天更新一次”的路线,这是最贴合电子墨水屏特性的低功耗实现。 |
For Kindle 7 (KT2 / WP63GW) · Firmware 5.12.2.2
From WinterBreak2 jailbreak, Hotfix / KUAL / FBInk environment setup, to offline lunar calendar generation, KUAL plugin integration, and daily automatic refresh
Device
7th Generation Kindle Basic (KT2 / WP63GW)
Firmware
5.12.2.2
Display
6-inch E-ink, 600 × 800
Goal
Offline lunar calendar + Week number + Solar terms + Monthly calendar + Extremely low power consumption
Document Date: September 2026
1. Project Overview
This guide outlines a complete modification path for the Kindle 7: first, use WinterBreak2 to obtain an environment capable of running third-party code; then install Hotfix, MRPI, KUAL, and FBInk; finally, deploy an offline lunar calendar specifically designed for the 600×800 e-ink screen. The calendar program does not rely on a browser or continuous internet connection; instead, it pre-generates static black-and-white pages for each day, while the device only handles retrieving images by date, refreshing the screen, suspending, and waking up the next day.
●
Core Appearance Principle: Since e-ink screens require almost no continuous refreshing to maintain an image, the key to saving power is keeping the CPU, Wi-Fi, and native Kindle interface in a suspended or stopped state for the vast majority of the time.
WinterBreak2 Jailbreak
Hotfix
MRPI
KUAL
FBInk
Calendar Plugin
Daily RTC Auto Refresh
2. Target Device and Software Environment
Item
Project Specifications
Description
Model
Kindle 7 / KT2
Back panel model WP63GW
Platform
5.12.2.2
Suitable for using the WinterBreak2 route
Indication
600 × 800, Black and White E-ink
Calendar images generated at native resolution
Front Light
None
Simpler structure when used as a desktop calendar
Plugin Entry
KUAL
Responsible for displaying menus such as "Preview / Auto Calendar"
Display Drawing
FBInk
Draws images directly to the framebuffer
Calendar Data
Pre-generated 2026-2035
Gregorian calendar, lunar calendar, week numbers, solar terms, and festivals are all offline
3. Standard Jailbreak Process
It is recommended to complete the environment setup in the following order. Proceed to the next step only after completing each one; there is no need to install all components at once.
3.1 WinterBreak2
1. Download the WinterBreak2 release package
Download the release version of wb2.zip.
Reference: WinterBreak2 Official Tutorial
2. Copy to the Kindle root directory
Copy the extracted contents of wb2.zip directly to the outermost directory of the Kindle after connecting via USB. Note: Do not create an extra nested wb2 folder.
Kindle/ ├── documents/ ├── jb.sh ├── patchedUks.sqsh └── winterbreak2/ └── dialoger.html
3. Execute the jailbreak
Safely eject, then run Jailbreak in the Kindle browser as instructed by the WinterBreak2 page. After completion, proceed to the subsequent Hotfix installation steps.
3.2 Universal Hotfix
Hotfix is used to supplement and maintain the jailbreak environment, serving as the foundation for subsequent components like KUAL to function correctly. Place Update_hotfix_universal.bin in the Kindle root directory, then execute it using the Kindle's "Update Your Kindle" function. After installation is complete, if "Run Hotfix" appears in the library, run it once.
Reference: KindleModding Universal Hotfix
3.3 MRPI (MR Package Installer)
MRPI does not require installation via platform updates; simply merge the extensions and mrpackages directories from the archive into the Kindle root directory.
Kindle/ ├── extensions/ │ └── MRInstaller/ └── mrpackages/
After installation, third-party .bin packages placed in mrpackages can be installed by executing the following command via the Kindle search bar:
;log mrpi
Reference: MobileRead MR Package Installer
3.4 KUAL
KUAL is an extension menu on the Kindle. For firmware 5.12.2.2, use the Booklet version of KUAL. Place the corresponding Update_KUALBooklet_..._install.bin into mrpackages, then run ;log mrpi. After installation, KUAL should appear in the library.
Reference: KUAL Official Community Post
3.5 FBInk
FBInk is used to draw text or PNG images directly on the Kindle e-ink screen. For this project, it is recommended to place the executable uniformly at /mnt/us/extensions/FBInk/bin/fbink to facilitate automatic location by the calendar script.
Kindle/ └── extensions/ └── FBInk/ └── bin/ └── fbink
Reference: FBInk Kindle Release Post (MobileRead)
●
Completion Marker: KUAL can open normally, and a test plugin can call FBInk to display "FBInk OK" on the screen, indicating readiness to enter the calendar program deployment phase.
4. Calendar Program Appearance Requirements
The goal of the calendar program is not to create a continuously running web application, but to turn the Kindle into a "once-a-day" e-paper calendar. The final page includes the following information:
· Gregorian calendar: Year, month, day, and day of the week;
· ISO Week Number: Calculated with Monday as the first day of the week;
· Lunar calendar: Lunar month and day;
· Sexagenary cycle (Heavenly Stems and Earthly Branches) and Zodiac year;
· Twenty-four Solar Terms and days until the next solar term;
Hints for common traditional festivals;
· Complete monthly calendar, with the current date highlighted;
· Fully offline, not dependent on Google Calendar, browsers, or network APIs.
4.1 Why use "Pre-generated Images" instead of real-time drawing on the Kindle
The Kindle 7 operating environment is older, and Chinese fonts, Python dependencies, lunar algorithms, and complex layout typesetting would increase deployment difficulty. Therefore, this project moves the calculation load to the PC side: using Python to pre-generate 600×800 black-and-white PNGs for every day from 2026 to 2035. The Kindle side only finds the image for the current date based on the system date and hands it over to FBInk for display.
Phase
Execution Location
Main Task
Data Calculation
PC-side Python
Gregorian calendar, lunar calendar, ISO week numbers, solar terms, festivals
Page Generation
PC-side Python + Pillow
Generate 600×800 1-bit black-and-white PNGs
Execution Indication
Kindle
Retrieve image by date → FBInk full-screen display → RTC suspend/wake
4.2 Page Layout
The page is designed according to the native 600×800 resolution of the Kindle 7. The upper section highlights the current date, the middle section displays lunar and solar term information, and the lower section shows the complete monthly calendar with the current day highlighted in white text on a black background.
Figure 1 Calendar Page Example (600 × 800 Black and White)
5. Calendar Program Development
5.1 PC Side: Date and Lunar Calendar Data
The PC-side script first iterates through the target date range. Gregorian information uses datetime/calendar directly; ISO week numbers are obtained from isocalendar().week; lunar dates are converted using lunar calendar data tables for 1900-2100; solar terms are generated as date mappings by year; and traditional festivals are matched using fixed date tables for both Gregorian and lunar calendars.
for day in every_day("2026-01-01", "2035-12-31"): solar = get_solar_date(day) week_no = day.isocalendar().week lunar = solar_to_lunar(day) term = get_solar_term(day) festival = get_festival(day) render_600x800_png(...)
5.2 PC Side: Generating E-ink Pages
Use Pillow to create a 600×800 1-bit black-and-white image. All Chinese text in the page is rasterized on the PC side, so no additional Chinese fonts are required on the Kindle. Images are saved in a "Year/Month/Date" hierarchy to facilitate direct location by Shell scripts.
images/ ├── 2026/ │ ├── 01/ │ │ ├── 2026-01-01.png │ │ └── ... │ └── 09/ │ └── 2026-09-02.png └── ... └── 2035/
5.3 Kindle Side: KUAL Plugin Structure
The calendar acts as a standard KUAL extension placed in the extensions/calendar directory. config.xml is responsible for declaring the extension and loading menu.json; menu.json defines the user-visible menu; the bin directory stores scripts for display, preview, suspension, and automatic execution; the images directory stores pre-generated pages.
Kindle/ └── extensions/ └── calendar/ ├── config.xml ├── menu.json ├── config.sh ├── bin/ │ ├── render.sh │ ├── preview.sh │ ├── start.sh │ ├── daemon.sh │ └── stop.sh ├── images/ └── logs/
5.4 render.sh: Displaying the Current Day's Page by Date
render.sh reads the Kindle's current system date, constructs the path to the day's PNG, locates the FBInk executable, and performs a full-screen refresh. The core logic is very simple:
TODAY="$(date +%Y-%m-%d)" Y="$(date +%Y)" M="$(date +%m)" IMG="$BASE/images/$Y/$M/$TODAY.png" FBINK -c -f -w -g "file=$IMG"
5.5 Automatic Mode: Daily Refresh at 00:05
Once automatic mode is started, the calendar program stops the native Kindle interface, turns off Wi-Fi, displays the current date, and uses RTC to set the next wake-up time before entering suspend. At 00:05, the Kindle automatically wakes up, reads the image for the new day, refreshes the screen, and then enters sleep again.
Start Auto Calendar ↓ Stop framework / lab126_gui ↓ Disable Wi-Fi ↓ FBInk displays current day PNG ↓ rtcwake -m mem → Suspend until next 00:05 ↓ RTC Wake-up ↓ Display new day → Suspend again
5.6 Short Press Power Button to Exit Auto Calendar
The final version interprets "waking up earlier than the scheduled RTC time" as a user-initiated action. During the auto-calendar sleep period, a short press of the power button wakes the device early; the program detects that it is earlier than the scheduled wake time, exits the calendar loop, and restarts the native Kindle interface.
●
Daily Usage Experience: Normally, the screen remains on the current day's calendar, automatically updating once in the early morning. If you need to read a book temporarily, simply short-press the power button to exit the dedicated calendar mode and return to the normal Kindle.
6. Calendar Plugin Installation and Usage
6.1 Copying Files
Extract the complete calendar package to the Kindle USB root directory to ensure the final paths are:
Kindle/extensions/calendar/config.xml Kindle/extensions/calendar/menu.json Kindle/extensions/calendar/bin/ Kindle/extensions/calendar/images/
Also confirm that FBInk is located at:
Kindle/extensions/FBInk/bin/fbink
6.2 KUAL Menu
After reopening, open KUAL and enter "Extremely Low Power Lunar Calendar". It is recommended to use the following order:
1. Preview Today for 15 seconds
Confirm that the current day's page layout and FBInk display are normal.
2. Test Suspension for 2 minutes
Confirm that the device can enter sleep after displaying the calendar and be automatically woken up by RTC.
3. Start Auto Calendar
Enter the dedicated calendar mode, which auto-updates every day at 00:05.
4. Short Press Power Button
When you need to read on the Kindle, short-press the power button to exit the calendar and restore the native interface.
6.3 Modifying Daily Refresh Time
The default refresh time is daily. If it is not the default 00:05, you can modify it in config.sh:
WAKE_HOUR=0 WAKE_MINUTE=5
For example, to change the update time to 01:10 every day:
WAKE_HOUR=1 WAKE_MINUTE=10
7. Low Power Consumption Explanation
The low power consumption of this approach comes from "minimizing active time" rather than simply lowering the screen brightness. The Kindle 7 itself has no front light, making it particularly suitable as an e-ink calendar.
Power Consumption Source
Handling Method
Result
E-ink Image Retention
No continuous refreshing
Calendar can remain on the display for a long time
Wi-Fi
Disabled in auto mode
Avoids background network power consumption
Kindle GUI
Stopped in dedicated calendar mode
Reduces platform interface and background activity
Calendar Calculation
Completed in advance on PC
Kindle does not run Python/lunar algorithms
Screen Updates
Once a day
Refresh frequency is extremely low
CPU
Suspended for the vast majority of the time
Works briefly only on date change
8. Final Directory and Component Relationships
Kindle/ ├── extensions/ │ ├── MRInstaller/ │ ├── FBInk/ │ │ └── bin/fbink │ └── calendar/ │ ├── config.xml │ ├── menu.json │ ├── config.sh │ ├── bin/ │ ├── images/ │ └── logs/ ├── mrpackages/ └── documents/
Component
Role
Runs Daily?
WinterBreak2
Completes jailbreak
No, used only during the jailbreak phase
Universal Hotfix
Maintains the jailbreak runtime environment
Background base environment
MRPI
Installs third-party .bin packages on Kindle
Used when installing packages
KUAL
Provides graphical extension menu
Used when starting/managing the calendar
FBInk
Directly refreshes E-ink framebuffer
Briefly invoked during daily refresh
Calendar Plugin
Image selection, display, suspension, and auto-wake
Core of auto mode
9. Project Results and Usage Summary
After completing the above process, this Kindle 7 will retain both normal reading capabilities and a dedicated calendar mode. Once entering the auto-calendar mode, the screen continuously displays the current date, lunar calendar, ISO week number, solar terms, and monthly calendar, waking up and refreshing only briefly on the day change; when reading is required, simply short-press the power button to exit the calendar.
●
Final Approach in a Nutshell: The jailbroken Kindle 7 does not run resident web pages but follows the route of "Pre-generated Static Calendar → FBInk Screen Refresh → RTC Deep Sleep → Update Once a Day", which is the low-power implementation best suited to the characteristics of e-ink screens.