产品观察丨硬件老手三人组创业,给手机壳加上可自定义墨水屏,半年营收数千万Product Observation | Three Hardware Veterans Strike Out, Adding Customizable E-ink Display to Phone Cases, Raking in Tens of Millions in Six Months


AI free token/AI免费积分
0

作者 | 乔钰杰

编辑 | 袁斯来

本文约2900字,建议阅读8分钟

各类可以吸附在手机上的智能设备层出不穷,围绕手机抢夺AI时代的使用者,已然是一场水面上的战争。

而一家来自深圳的创业公司「极稚科技」(XTREM INNO)找到的切口是手机壳。

去年11月,XTREM INNO的手机壳机型开售,售价59-79美元。这款手机壳背面放置了一块可以借助手机投图的四色圆形墨水屏,使用者不需要更换手机壳,只要在App里挑选图片,就可以随时更换手机壳背面的图案。

产品观察丨硬件老手三人组创业,给手机壳加上可自定义墨水屏,半年营收数千万

(图源/企业)

开售9个月,XTREM INNO已在海外市面卖出15万余件,并在泰国Shopee的同价位品类目中超过“手机壳界的爱马仕”Casetify,排名第一。当下,其iPhone18新机周期首批订单已超20万件,半年营收超过千万。

XTREM INNO的创始团队由三位硬件“极客”组成。CEO庄智刚有多年3C硬件创业经验,CTO任政威曾任童心制物(xTool母公司)机型VP,潘若昱则曾任比亚迪D1外饰负责人。创业前,三人曾共同做过一款客制化键盘,售价在4000元到5万元之间,限量300台,五分钟抢售一空,在圈内小有成绩。

这段经历让三人验证了“情绪价值”对于硬件机型的意义,但小众、低频的品类仍旧限制了机型的市面空间。于是,团队开始寻找一个更大的消费情形。

“笔者知道一定会有新的AI硬件替代手机。但五年内,对于一个普通消费者来说,手机仍旧是最稳定的智能消费中心。”XTREM INNO创始团队认为。因而公司没有挑选直接从一款新的AI终端做起,而是选中了“手机壳”,这个足够高频,也足够贴近普通消费者的情形。

每年,全球手机壳市面规模超过300亿美元,其中iPhone占据一半以上。但手机壳已经是一个充分竞争的市面,高端手机壳领域,Casetify借助IP联名和明星同款抢占高端使用者心智,Pitaka依靠轻薄的芳纶纤维材料形成差异化,图拉斯借助支点壳和电商渠道扩大规模,大量白牌厂商则占领了低价市面。

在这样一个红海中,XTREM INNO的打法不是继续卷材质、颜色和保护表现,而是让手机壳多了一块“可以变化的屏”。

而这块显示屏,也成为了其机型区别于传统手机配件的关键。

01 “做透”一个墨水屏手机壳

XTREM INNO手机壳的背面,有一块MagSafe大小的圆形墨水屏,用来接收APP端的投图。

原理并不难,但要做一块真正合适手机壳的墨水屏,并让它成为一款可以规模销售的消费电子机型仍有门槛。

实际上,墨水屏手机壳并不是新概念,XTREM INNO CTO任政威告诉硬氪“早在2024年,市面上就已经浮现类似机型,但此前的思路大多使用正方形显示屏。一维度,方形墨水屏在手机壳穿脱过程中容易扭曲碎裂,导致手机壳不得不做厚;另一维度,正方形屏的墨水屏机型没有配备MagSafe或者吸力特别弱。”

XTREM INNO首先把显示屏做成了圆形,借助工程优化和结构迭代,在兼顾视觉成效的同时,保证了MagSafe磁吸能力的正常使用。

这块圆形显示屏,使用多色E-INK电子标签纸,有别于大众比较熟悉的高刷新、单色电子书显示屏,这类显示屏可表明更多颜色,信息表达更强,同时只有刷新画面时耗电,静态表明几乎不耗电。此前,这类显示屏更多被用于超市电子价签,但如果直接拿现成思路使用,刷写寿命和表明成效都无法满足手机壳的高频使用情形。

“拿现有规格的多色墨水屏来做,你甚至只能拿到一些尾货,供应链也没办法长期稳定。”任政威表示。

要把手机壳当成消费电子来做,首先要重新定义显示屏本身。团队挑选与供应商合作重新开模,围绕手机壳的使用情形对墨水屏开展定制。据介绍,当下团队已取得这款订制墨水屏在手机壳行业的独家使用授权,刷写寿命和表明曲线也按照手机壳的实际使用标准开展了重新外观。

产品观察丨硬件老手三人组创业,给手机壳加上可自定义墨水屏,半年营收数千万

(图源/企业)

而要让使用者拿起即用,还需要应对显示屏背后的NFC天线与手机本身的适配难题。

XTREM INNO的手机壳思路里,App借助调用iPhone手机的NFC能力,向手机壳内的电路板发出射频信号,手机壳内置的射频接收天线同时完成供电和数据传输,从而完成墨水屏的刷写。但难题在于,不同iPhone机型的NFC天线位置、频谱特性并不完全一样,甚至同一台手机,在电量、温度等状态发生变化时,NFC天线的表现也会有所变化。

“笔者一开始也踩过这个坑。”任政威说,团队早期使用的是通用思路,结果售后情况格外多,因为使用者手里的手机状态和研发阶段的测试机完全不同。

最终,团队逐一测试不同iPhone的频谱偏移,并针对对应情况优化NFC供电效率和投图链路。另外,由于手机设备对NFC调用有时间限制,期间可获取电量有限。团队还需要从头搭建硬件思路以达成高质的能量转换效率,来确保足够电力驱动显示屏刷新、运行自检算法。

他们要保证,即使一台手机的NFC天线状态不是最佳,也能吸收到足够的电量完成一次投图。

在9月上市的iPhone18系列机型中,XTREM INNO又加入蓝牙芯片,将NFC从“供电+传输”变成主要负责供电,将数据传输交给蓝牙。这样做的好处是,一维度蓝牙传输速度更快,也更容易达成加密;另一维度,更快的传输速度所省下的功耗,可以兼容接下来的机型迭代,譬如更高的分辨率、更的好色彩表现等。

这些能力消费者未必可以直接感知,却让XTREM INNO的手机壳更接近一款完整的消费电子机型。

02 手机背面的内容入口

硬件之外,对XTREM INNO来说,更大的想象空间来自“投屏IP”,这也是当下年轻使用者最核心的心理需要。

当下,XTREM INNO已与多位艺术家合作,在APP端的社群里更新优质的图库内容。

除了投送APP端的艺术家社群的图片与使用者个人相册的照片,使用者还可以借助AI生图开展图片创作,而token消耗则成为APP端的订阅收入来源。

产品观察丨硬件老手三人组创业,给手机壳加上可自定义墨水屏,半年营收数千万

图为XTREM INNO手机壳和蔚来汽车的联名机型(图源/企业)

任政威告诉硬氪,团队一开始并没有预期使用者会在App里付费,相关能力直到今年5月才正式上线。但从5月到当下,AI滤镜已取得使用者的广泛好评,付费转化率达到约4.5%,使用者主要借助购买积分或者连续订阅来获取AI生成等内容服务。

随着机型在不同海外市面销售,团队也会针对当地文化热点开发区域化内容。例如,依据不同国家的流行趋势和节日推出用于AI生图的专属滤镜、图片和活动。

下一步,XTREM INNO还计划开放UGC内容平台。使用者可以上传自己喜欢的动漫、游戏、明星等内容,再由其他使用者下载并投图。同时,团队当下也在推进与明星、IP的合作。

一维度,XTREM INNO由使用者自主决定的个性化投图能力,让手机壳从一个静态机型,变成了一个可以每天变化的“数字装饰品”。另一维度,他们将定制集成在软件侧,也应对了手机壳行业一个格外现实难题——库存压力,新增颜色、图案不会带来新的SKU,而是转化为使用者自定义消费硬件的新鲜感。

产品观察丨硬件老手三人组创业,给手机壳加上可自定义墨水屏,半年营收数千万

(图源/企业)

而当使用者每天都在投图,后台也会持续沉淀数据。

当下,XTREM INNO正在测试一种更主动的内容建议方式。例如,一个使用者长期投网球、猫、某个艺术家或者某类电影,平台就可以逐步理解他的兴趣偏好。主动生成一张融合这些兴趣元素的图片,在使用者授权的前提下推送给他,进一步增强使用者粘性。

“现在有点像2010年前后的智能手机到来之前。那时候有翻盖的、滑盖的、各种各样的手机,人们也不知道最终会是多点触控智能手机统一江湖。”任政威说。

在他看来,如今的AI硬件也处在类似阶段。人们都在寻找下一代终端,但最终什么形态可以真正普及,没有人可以提前给出答案。

下一阶段,XTREM INNO还计划从“手机支架”切入,推出一款名为“Sloth”的AI硬件。

Sloth将以手机支架为基础形态,在延续手机壳投图、AI滤镜、内容社群等能力之外,尝试借助长期的日常互动逐步形成一个使用者专属的AI形象,集成工具属性与长期陪伴的情绪价值属性。平台则借助长期记忆,为使用者给出更加个性化的建议和反馈。这款机型预计将于年底登陆众筹平台。

本文来源:https://www.163.com/dy/article/L7BJ99DF05118DFD.html
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

0

Written by Qiu Yujie

Edited by Yuan Silai

This article is approximately 2900 words, recommended reading time: 8 minutes

A wide variety of smart devices that can be attached to phones are emerging, competing for users in the AI era around mobile phones, which has already become a battle on the surface.

A startup company from Shenzhen, "XTREM INNO", found its niche in phone cases.

In November last year, XTREM INNO's phone case model was launched, priced at $59–$79. The back of this phone case features a circular four-color ink screen that can be projected via the phone. Users do not need to replace the phone case; they only need to select an image in the app to instantly change the pattern on the back of the case.

Product Observation | Three Hardware Veterans Strike Out, Adding Customizable E-ink Display to Phone Cases, Raking in Tens of Millions in Six Months

(Source: Company)

Within 9 months of launch, XTREM INNO has sold over 150,000 units in the global market, surpassing the high-end brand Casetify and ranking first in the same price segment on Shopee in Thailand. Currently, the first batch of orders for the iPhone18 new model cycle has exceeded 200,000 units, with a half-year revenue exceeding 10 million.

The founding team of XTREM INNO consists of three hardware "geeks". CEO Zhuang Zhigang has years of experience in 3C hardware entrepreneurship. CTO Ren Zhengwei previously served as the VP of model at MakeBlock (xTool's parent company). Pan Ruoyu was the exterior design lead for the BYD D1. Before starting the business, the three collaborated on a customized keyboard project, priced between $4000 and $50000, limited to 300 units, which sold out within five minutes, gaining recognition in the community.

This experience confirmed the significance of "emotional value" in hardware design, but the niche, low-frequency nature of the product still limited its market potential. Therefore, the team began looking for a larger consumer scenario.

"We know that new AI hardware will eventually replace phones, but within the next five years, for an average consumer, phones remain the most stable center of intelligent consumption," the XTREM INNO founding team believes. Thus, the company chose not to start from a new AI terminal but selected "phone cases" as a scenario that is both high-frequency and close to average consumers.

The global phone case market is worth over $30 billion annually, with iPhones accounting for more than half. However, the phone case market is highly competitive. In the high-end segment, Casetify dominates with IP collaborations and celebrity endorsements. Pitaka differentiates with lightweight aramid fiber materials, while Torras expands through bracketed cases and e-commerce channels. Numerous white-label manufacturers fill the low-price segment.

In this red ocean, XTREM INNO's strategy is not to compete on material, color, or protection performance, but to add a "changing display" to the phone case.

This display is the key factor distinguishing their product from traditional phone accessories.

01 "Perfecting" a Single Ink Screen Phone Case

The back of the XTREM INNO phone case features a circular ink screen the size of a MagSafe, used for projecting images from the app.

The principle is simple, but creating an ink screen that is truly suitable for a phone case and can be mass-produced requires significant expertise.

Ink screen phone cases are not a new concept. XTREM INNO CTO Ren Zhengwei told Hardcore that "similar products have been appearing on the market since 2014, but most used square displays. The issue was that square screens are vulnerable to twisting and cracking when the case is removed, forcing the case to be made thicker. Additionally, these square-screen models often lacked MagSafe or had very weak magnetic attraction."

XTREM INNO first converted the display to a circular shape, ensuring the visual effect while maintaining the magnetic attraction capability of MagSafe through structural optimization.

This circular display utilizes multi-color E-INK electronic paper. Unlike the common monochrome, high-refresh e-readers, this screen allows for more color expression and is energy-efficient, consuming power only during page refreshes. Previously, such displays were mainly used for supermarket price tags, but applying them directly to phone cases without modification would result in poor durability and display quality due to the high-frequency usage scenario.

"If you try to use existing specifications for this, you'll likely only get leftover stock, and the supply chain can't stably produce it long-term," Ren Zhengwei noted.

To treat the phone case as a consumer electronics product, they needed to redefine the display. The team collaborated with suppliers to create a custom mold, optimizing the ink screen specifically for the phone case's usage scenario. Now, the team has exclusive authorization to use this customized screen in the phone case industry, with a lifespan and response curve calibrated for actual use.

Product Observation | Three Hardware Veterans Strike Out, Adding Customizable E-ink Display to Phone Cases, Raking in Tens of Millions in Six Months

(Source: Company)

However, making the case user-friendly also required addressing the compatibility of the NFC antenna on the display with the phone.

In XTREM INNO's design, the app sends a radio frequency signal to the circuit board inside the case using the iPhone's NFC capability. The case's radio frequency reception antenna simultaneously powers the device and transmits data, completing the update of the ink screen. The challenge is that the NFC antenna positions and spectral characteristics vary across iPhone models, and even a single phone's NFC behavior changes with battery level and temperature.

"I fell into this trap at the beginning," Ren Zhengwei recalled. The initial design used a generic approach, leading to high returns because user phones were in different states than the testing machines.

The team eventually mapped the spectral offsets for different iPhones and optimized the NFC power supply and projection chain accordingly. Furthermore, since mobile devices have a time limit for NFC calls and a limited available charge window, the team had to build a high-efficiency power conversion circuit from scratch to ensure enough power reaches the display for a full refresh and self-check.

They needed to guarantee that even a phone with suboptimal NFC state could draw enough power to complete an image transfer.

In the iPhone16 series released in September, XTREM INNO added a Bluetooth chip, shifting the primary data transmission from NFC to Bluetooth. This allows for faster transfer speeds and better encryption, while freeing up the NFC bandwidth to focus on power supply. This change prepares the hardware for future iterations, such as higher resolution or better color reproduction.

These technical improvements may not be visible to consumers, but they are essential to turning the phone case into a fully functional consumer electronic device.

02 The Content Gateway on the Back of the Phone

Beyond the hardware, XTREM INNO's most significant opportunity lies in the "projection IP," which caters to the core psychological needs of young users.

XTREM INNO has already partnered with multiple artists, providing a library of high-quality images within the app's community.

Users can send images from the artist community, their personal albums, or use AI to generate new images. The consumption of tokens for these features constitutes the app's subscription revenue.

Product Observation | Three Hardware Veterans Strike Out, Adding Customizable E-ink Display to Phone Cases, Raking in Tens of Millions in Six Months

Picture of the XTREM INNO phone case and NIO car collaboration (Source: Company)

Ren Zhengwei told Hardcore that the team initially did not expect users to pay for content, with the related features only launched in May 2024. However, from May to September, the AI filter has become popular, with a paid conversion rate of approximately 4.5%. Users mainly purchase points or subscribe continuously to access AI generation and other content services.

As the product is sold in different international markets, the team plans to develop localized content based on cultural trends and holidays in those regions.

The next step for XTREM INNO is to open a UGC (User Generated Content) platform. Users will be able to upload images of their favorite anime, games, or celebrities for others to download and project. Additionally, the team is working on collaborations with celebrities and major IPs.

By allowing users to autonomously determine the content projected, XTREM INNO is transforming the phone case from a static object into a dynamic "digital accessory" that can be changed daily. This also addresses the significant inventory issues in the phone case industry, as new colors and patterns are updates in the software community rather than requiring new physical SKUs.

Product Observation | Three Hardware Veterans Strike Out, Adding Customizable E-ink Display to Phone Cases, Raking in Tens of Millions in Six Months

(Source: Company)

With users actively updating their case images daily, the platform is accumulating valuable data.

XTREM INNO is currently testing a more proactive content recommendation system. For example, if a user frequently projects images of tennis, cats, a specific artist, or a film genre, the platform will learn their preferences and suggest images that combine these interests, potentially even generating a custom image for them.

"We are in a period similar to the pre-smartphone era of the 2010s. There were flip phones, sliders, and various forms, and no one knew for sure that multi-touch smartphones would dominate," Ren Zhengwei explained.

In his view, the current state of AI hardware is analogous. Everyone is searching for the next generation of terminals, but no one can predict which form factor will ultimately succeed.

In the near future, XTREM INNO plans to launch a new AI hardware device called "Sloth," which will function as a phone stand. Sloth will inherit the projection, AI filter, and community features of the phone case while attempting to create a personalized AI companion that learns from the user's interactions. The goal is to build a long-term relationship between the hardware and the user, providing both utility and emotional support. This new product is expected to be available on crowdfunding platforms by the end of the year.

Building on the form of a mobile phone stand, Sloth will continue to offer features like case projection, AI filters, and a content community, while attempting to develop a personalized AI image through long-term interaction. This integration aims to provide both tool functionality and emotional support. The platform will leverage long-term memory to offer more customized advice and feedback. The device is expected to launch on a crowdfunding platform towards the end of the year.

/ 阅读下一篇 /

Return to NetEase homepage Download NetEase News app

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry