墨水屏具备双稳态显示、低功耗、高反射率等特点,画面刷新后无需持续供电即可长时间保持显示,非常适合电子标签、信息展示及手机配件等低功耗应用。充电头网了解到,墨水屏也正成为2026年充电宝差异化设计的新方向,并逐步从概念创新走向方案化和商品化。
华翼微近期推出了一套以HYM83C1 NFC通道芯片为核心的墨水屏开发方案,通过HYM83C1打通手机NFC与墨水屏之间的数据和能量传输,在完成图片无线传输的同时利用NFC射频场取电,为无电池墨水屏手机壳、电子标签等产品提供了一套完整开发方案。
【视频】
从实测视频也能看出,这套方案可直接利用手机NFC取电,在无需额外供电的情况下完成墨水屏刷新及图像绘制。
接下来充电头网也详细介绍一下这款方案。
华翼微 HYM83C1 NFC墨水屏方案
方案开发板正面集成2.66英寸四色墨水屏、HYM83C1主控芯片、NFC线圈及USB-C外部供电接口,并设有NFC取电与外部供电切换接口,便于方案调试及功能验证。
开发板背面简洁,四角设有防滑脚垫,右上方通过24Pin FPC连接器与墨水屏排线连接。
实测该方案长度约为100.07mm。
宽度约为75.17mm。
实测发现,用户可以通过手机APP获取当前墨水屏参数,选择或者编辑需要显示的图片,再通过NFC将图像数据传输至开发板。
而且APP本身提供基础图库以及图片编辑功能,完成图片处理后点击“投屏”,即可进入NFC传输流程。
方案在底层还针对图像传输提供了两套处理方式。一种是先将手机发送的图像数据写入FLASH,再由芯片整体传输到屏幕;另一种则可以直接边接收图片数据、边向墨水屏传输,省去FLASH写入过程。
华翼微HYM83C1
整套方案的核心器件就是华翼微HYM83C1这款芯片。
HYM83C1是一款NFC通道芯片,支持ISO/IEC 14443 Type-A/B非接触通信协议,内置国产32位E803 CPU,并集成256KB FLASH和14.24KB SRAM,同时提供SPI、I2C、UART及GPIO等接口,可承担NFC通信、数据处理以及墨水屏控制等功能。
也正因此,这套方案无需再外挂独立MCU或NFC控制器。HYM83C1既负责与手机进行NFC通信和图像数据处理,又可通过SPI直接控制墨水屏,同时利用GPIO完成电源模块控制。
从方案上看也能看出PCB上仅配置HYM83C1这一颗核心控制IC,外围主要由NFC天线及匹配、整流稳压、DC-DC和墨水屏驱动相关电路组成,进一步简化了整套方案的硬件架构。
HYM83C1还支持利用NFC射频场能量对外供电。手机靠近NFC线圈后,线圈耦合获得的能量经过整流、稳压及DC-DC转换,为HYM83C1和墨水屏相关电路提供电源,并由HYM83C1控制墨水屏完成图像写入及刷新。
因此,HYM83C1实际上在一颗芯片内打通了NFC通信、数据处理、外设控制和射频取电等关键功能,省去了传统NFC芯片+独立MCU的分立控制架构,有助于减少核心器件数量、缩小PCB占用,并降低无源墨水屏产品的硬件设计复杂度。
参数化设计,方便适配不同墨水屏
除了完成现有开发板的投屏功能,这套Demo还考虑到了后续不同墨水屏的二次开发。
华翼微将屏幕厂家、尺寸、分辨率、扫描方向以及颜色模式等参数进行了统一定义,通过TLV格式进行配置。开发者更换屏幕时,可以通过参数匹配对应驱动,而不需要重新修改整个软件框架。
现有框架还将屏幕参数与驱动接口分离,当需要增加新的墨水屏时,主要完成新的屏幕驱动接口以及参数配置即可,原有框架无需大幅调整。
这也意味着华翼微提供的并不只是单一尺寸的墨水屏Demo,而是一套可以继续扩展不同尺寸、分辨率和颜色墨水屏的NFC显示开发平台。
充电头网总结
华翼微这套NFC墨水屏方案以HYM83C1为核心,将NFC通信、MCU级数据处理、外设控制及射频取电能力集中在一颗芯片中,无需额外挂载独立MCU和NFC控制器,有助于减少核心器件数量并简化整机设计。
该方案还可利用手机NFC完成图像传输,并通过射频取电支持屏幕刷新,同时具备多尺寸、多色墨水屏的适配能力。对于墨水屏手机壳、电子标签及其他低功耗显示产品,这套方案提供了一条集成度较高、开发链路较完整的实现路径。
本文来源:https://www.chongdiantou.com/archives/1788158429903.html
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
E-paper displays feature bistable display, low power consumption, and high reflectivity. The image remains visible for a long time after refreshing without continuous power supply, making them suitable for electronic tags, information displays, and low-power phone accessories. ChargerLAB understands that e-paper is becoming a new direction for differentiated charger design in 2026, moving from concept to solution and product.
Huayingwei has recently launched an e-paper development solution centered on the HYM83C1 NFC channel chip. The HYM83C1 bridges the gap between the phone's NFC and the e-paper screen, enabling wireless image transmission and harvesting energy from the NFC radio field to power the screen, providing a complete solution for battery-free e-paper phone cases and electronic tags.
[VIDEO]
The test video shows that the solution can be powered directly via NFC, completing e-paper refreshing and image drawing without additional power supply.
ChargerLAB will now provide a detailed introduction to this solution.
Huayingwei HYM83C1 NFC E-Paper Solution
The front of the development board integrates a 2.66-inch four-color e-paper screen, the HYM83C1 control chip, an NFC coil, and a USB-C external power interface. It also features a switch for NFC power harvesting and external power supply, facilitating solution debugging and function verification.
The back of the development board is clean, with anti-slip feet on four corners. The upper right part connects to the e-paper ribbon cable via a 24-pin FPC connector.
The measured length of the solution is approximately 100.07 mm.
The width is approximately 75.17 mm.
It is observed that users can access the current e-paper parameters via a mobile app, select or edit the image to be displayed, and then use NFC to transmit the image data to the development board.
The app provides a basic image library and editing functions. After processing the image, clicking "Project" initiates the NFC transmission process.
The solution offers two processing methods for image transmission. One involves writing the received image data into flash before transferring it to the screen. The other option allows for direct transmission of the image data to the e-paper screen as it is received, bypassing the flash writing process.
Huayingwei HYM83C1
The core component of this solution is the Huayingwei HYM83C1 chip.
HYM83C1 is an NFC channel chip that supports the ISO/IEC 14443 Type-A/B contactless communication protocol. It features a built-in domestic 32-bit E803 CPU, 256 KB of flash memory, and 14.24 KB of SRAM. It also provides interfaces such as SPI, I2C, UART, and GPIO, capable of handling NFC communication, data processing, and e-paper control.
Consequently, this solution does not require a separate MCU or NFC controller. The HYM83C1 manages NFC communication with the phone, processes the image data, directly controls the e-paper screen via SPI, and handles power module control with its GPIOs.
The PCB shows only the HYM83C1 as the central control IC, with the surrounding circuitry consisting primarily of the NFC antenna, matching networks, rectifiers, voltage regulators, DC-DC converters, and e-paper drive components, simplifying the hardware architecture.
The HYM83C1 also supports harvesting energy from the NFC radio field. When the phone approaches the NFC coil, the coupled energy is rectified and regulated to power the HYM83C1 and the e-paper circuitry, allowing the screen to be updated with the new image.
In summary, the HYM83C1 integrates NFC communication, data processing, peripheral control, and radio frequency energy harvesting into a single chip. This eliminates the need for a separate NFC chip and MCU architecture, reducing the number of core components, minimizing the PCB footprint, and lowering the hardware design complexity for passive e-paper products.
Parameterized Design for Flexibility
In addition to the current demo functionality, the solution is designed to accommodate future developments with different e-paper screens.
Huayingwei has standardized the configuration parameters, including screen manufacturer, size, resolution, scan direction, and color mode, using the TLV format. This means that developers can switch to a different screen simply by adjusting these parameters rather than rewriting the entire software framework.
The current framework separates the screen parameters from the drive interfaces. To add a new e-paper screen, developers only need to create a new drive interface and update the configuration parameters, leaving the existing framework untouched.
This indicates that Huayingwei is offering a scalable NFC display development platform capable of supporting multiple sizes, resolutions, and colors of e-paper screens, not just a single demo unit.
ChargerLAB Summary
The Huayingwei NFC e-paper solution relies entirely on the HYM83C1 chip, which combines NFC communication, MCU-level data processing, peripheral control, and RF energy harvesting. The absence of a requirement for additional MCUs or NFC controllers reduces the bill of materials and simplifies the overall device design.
The solution enables image transfer via smartphone NFC and supports screen refreshing through RF power harvesting. Its ability to adapt to various screen sizes and colors makes it a versatile platform suitable for e-paper phone cases, electronic labels, and other low-power display applications, offering a clear and efficient hardware implementation path.
Source: https://www.chongdiantou.com/archives/1788158429903.html If there are copyright issues, please contact us at 13951431913#139.com or submit a comment on the right side.








