拆解报告:影石Insta360 Mic Pro无线麦克风Teardown: Insta360 Mic Pro Wireless Microphone


AI free token/AI免费积分

本文来源:https://mp.weixin.qq.com/s/GgunWRyGJgSmhTplxEKjTg
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。

作为全球领先的智能影像品牌,Insta360影石以全景工艺为核心,专注研发全景相机、运动相机、AI云台、网络摄像头等智能影像设备,并于2025年推出无线领夹麦克风机型,用于提高视频录制的音频质量。近期,新一代机型Insta360 Mic Pro正式发布,以创意墨水屏外观,三麦克风阵列拾音和卓越音质,为使用者带来全面革新的无线麦克风感受。

详细能力规格维度,影石Insta360 Mic Pro无线麦克风发射器搭载墨水屏,兼容个性化自定义表明;搭载三麦克风陈列,兼容全向、超高指向、8字形三种拾音模式,适用不同情形给出精准收音;搭载AI音频处理芯片,搭配降噪算法,给出出众的噪声抑制;兼容自动增益调节,防止爆音和音量忽大忽小;兼容三档音色预设,让声音更具感染力。

影石Insta360 Mic Pro兼容最高两发四收,满足多机位部署需要;兼容四发一收,从容应对多人访谈情形,墨水屏还可设置独立编号和标识,便于快速区分发言人;兼容4声道输出,兼容单声道或双声道模式,使后期创作更加自由灵活;发射器内置32GB存储空间,兼容32-Bit浮点内录,为素材给出额外保障;兼容立体声内录,让声音更具空间感。

其他维度,该机型全面兼容手机、相机、电脑等录制设备,发射器还可直连影石生态相机,让录制更加方便。接收器搭载OLED触摸屏和波轮,信息反馈更直观,操作更便捷;兼容时间码输入输出,后期从容对其多机位素材。电池续航上,单个发射器可录制10小时,搭配充电盒综合录制时长30小时,快充5分钟,即可续用约1.5小时。下面就来看看这款机型的详细拆解报告吧~

一、影石Insta360 Mic Pro无线麦克风开箱

 

影石Insta360 Mic Pro无线麦克风包装盒使用了天地盖结构,黑色背景,顶部展示有机型外观和机型名称。

拆解报告:影石Insta360 Mic Pro无线麦克风

包装盒底部介绍了内部清单,以及参数信息。发射器型号:MC110,输入:5V-0.5A,电池:3.89V DC. 240mAh 0.94Wh;接收器型号:MC210,输入:5V-0.7A,电池:3.89V DC. 410mAh 1.60Wh;充电盒型号:MC310,输入:5V-3A,输出:5V-0.5A*2+0.7A,电池:3.89V DC. 2815mAh 10.951Wh;制造商:影石创新科技有限公司。

拆解报告:影石Insta360 Mic Pro无线麦克风

包装盒顶部外观有佩戴情形图。

拆解报告:影石Insta360 Mic Pro无线麦克风

包装盒底部印有“Your voice,Your style”这款产品的宣传口号。

拆解报告:影石Insta360 Mic Pro无线麦克风

包装盒左侧详细列出了该产品的多项技术特性:包括可自定义的墨水屏、三麦克风阵列、NPU处理芯片以及4发1收与2发4收的收音模式。

拆解报告:影石Insta360 Mic Pro无线麦克风

包装盒的另一侧面同样展示了该设备的多项功能特点。

拆解报告:影石Insta360 Mic Pro无线麦克风

将包装盒内所有组件取出后,可以看到包括主机、手机转接器、磁吸片、背夹、防风毛套、收纳袋、3.5mm连接线、USB-C数据线、快速入门指南和保修卡。

拆解报告:影石Insta360 Mic Pro无线麦克风

影石Insta360 Mic Pro无线麦克风的充电盒采用圆角方形设计,正面配有半透明盖板,透过盖板可以清晰看到内部发射器上墨水屏显示的信息。

拆解报告:影石Insta360 Mic Pro无线麦克风

充电盒背面外观展示,其下方设有Type-C充电接口。

拆解报告:影石Insta360 Mic Pro无线麦克风

充电盒正面边缘部分布置了四枚LED指示灯,用以显示电量剩余情况。

拆解报告:影石Insta360 Mic Pro无线麦克风

充电盒顶部的外形设计融入了滑动开关,旨在提供更为顺畅的开盖体验。

拆解报告:影石Insta360 Mic Pro无线麦克风

充电盒的底部设有防滑胶垫,同时粘贴有型号标签,其信息与外包装盒保持一致。

拆解报告:影石Insta360 Mic Pro无线麦克风

揭开充电盒后,内部舱室构造一览无余,能够容纳包括麦克风、转接头及磁铁在内的全部配件。

拆解报告:影石Insta360 Mic Pro无线麦克风

将舱室内的所有物品取出后,其底部构造清晰可见,配置有用于为麦克风充电的金属接触点。

拆解报告:影石Insta360 Mic Pro无线麦克风

影石Insta360 Mic Pro无线麦克风的整体外观展示,这款产品属于一拖二版本。

拆解报告:影石Insta360 Mic Pro无线麦克风

随产品附赠的两个磁铁,能够将发射器固定在衣物上的任意位置进行使用。

拆解报告:影石Insta360 Mic Pro无线麦克风

这款USB-C手机转接头,用于连接接收器与手机、平板等支持USB-C录音的设备。

拆解报告:影石Insta360 Mic Pro无线麦克风

转接器的背面设有接触点,用于连接发射器。

拆解报告:影石Insta360 Mic Pro无线麦克风

Insta360 Mic Pro接收器采用方形设计,机身正面卡槽盖上有品牌LOGO标识。

拆解报告:影石Insta360 Mic Pro无线麦克风

移开卡槽盖后,下方的卡扣结构可用于固定发射器,快速转换为机顶麦克风。

拆解报告:影石Insta360 Mic Pro无线麦克风

在机身背面,设有领夹设计,兼具冷靴接口功能,可方便地与相机热靴连接固定。

拆解报告:影石Insta360 Mic Pro无线麦克风

接收器顶部配备触摸显示屏,用于功能调节,右侧设有旋转拨轮,便于精确调整设置。

拆解报告:影石Insta360 Mic Pro无线麦克风

接收器底部设有Type-C充电接口及充电触点,这些接口被中间的卡槽盖所覆盖。

拆解报告:影石Insta360 Mic Pro无线麦克风

去掉卡槽盖后,下方露出的金属触点用于连接USB-C转接头。

拆解报告:影石Insta360 Mic Pro无线麦克风

设备左侧配备了一个电源按键,可供用户开机、关机以及锁定或解锁屏幕。

拆解报告:影石Insta360 Mic Pro无线麦克风

设备右侧提供了3.5mm的相机音频接口和耳机监听接口。

拆解报告:影石Insta360 Mic Pro无线麦克风

发射器采用圆形设计,其正面配备了一块彩色墨水屏,用户可通过APP自由设定显示图案。

拆解报告:影石Insta360 Mic Pro无线麦克风

可拆卸的领夹位于机身背面,其上设有与充电盒相连的金属触点。

拆解报告:影石Insta360 Mic Pro无线麦克风

设备顶部设有麦克风拾音孔,并由金属盖板加以保护。

拆解报告:影石Insta360 Mic Pro无线麦克风

机身右侧的麦克风拾音孔细节展示,左侧是状态指示灯,右侧则是用于固定防风帽套的卡槽。

拆解报告:影石Insta360 Mic Pro无线麦克风

机身右侧同样设有麦克风拾音孔,其右侧是内录指示灯。

拆解报告:影石Insta360 Mic Pro无线麦克风

机身底部集成了Type-C充电接口,同时包含电源键和内录键。

拆解报告:影石Insta360 Mic Pro无线麦克风

通过向上滑动拆卸卡扣式背夹,即可看到发射器背面的内部构造。

拆解报告:影石Insta360 Mic Pro无线麦克风

据我爱音频网实际测量,影石Insta360 Mic Pro一拖二无线麦克风搭配磁铁*2及转接头,其整体重量约为256.0g。

拆解报告:影石Insta360 Mic Pro无线麦克风

发射器重量约为22.8g。

拆解报告:影石Insta360 Mic Pro无线麦克风

接收器重量约为31.4g。

二、影石Insta360 Mic Pro无线麦克风拆解

借助开箱,笔者详细了解了影石Insta360 Mic Pro无线麦克风的创意外观外观,下面进入拆解部分,看看其内部结构规格信息~

接收器拆解

拆解报告:影石Insta360 Mic Pro无线麦克风

将接收器的背部盖板取下,其内壁便能看到电池单元被粘贴固定。

拆解报告:影石Insta360 Mic Pro无线麦克风

将电池单元取下后,连接电池的正负极导线通过插座与主板相连。

拆解报告:影石Insta360 Mic Pro无线麦克风

该接收器内部配置了一块可充电的锂离子电池组,具体型号为441838PF8,其充电限制电压为4.48V,额定容量为410mAh,额定能量为1.60Wh,标称电压为3.89V,该电池由重庆市紫建电子股份有限公司生产。

拆解报告:影石Insta360 Mic Pro无线麦克风

电池背面的标签上印有多项机型认证信息。

拆解报告:影石Insta360 Mic Pro无线麦克风

整个腔体内部的结构布局清晰可见,主板通过螺丝牢固地固定在内部。

拆解报告:影石Insta360 Mic Pro无线麦克风

拧下螺丝后,可将主板取出,同时将顶部的显示屏一并拆卸下来。

拆解报告:影石Insta360 Mic Pro无线麦克风

腔体内部可见旋转编码器特写,其表面涂有密封胶。

拆解报告:影石Insta360 Mic Pro无线麦克风

显示屏背面的电路布局一览无余。

拆解报告:影石Insta360 Mic Pro无线麦克风

显示屏的排线与主板上的BTB连接器公座相接。

拆解报告:影石Insta360 Mic Pro无线麦克风

标有36221 540字样的IC芯片。

拆解报告:影石Insta360 Mic Pro无线麦克风

接收器主板一侧的电路分布,无线通讯模块由屏蔽罩保护。

拆解报告:影石Insta360 Mic Pro无线麦克风

接收器主板另一侧电路全景展示。

拆解报告:影石Insta360 Mic Pro无线麦克风

屏蔽罩内部电路图,无线音频方案采用Actions炬芯科技ATS3231AL端侧AI音频SoC。ATS3231系列作为炬芯科技首款集成AI-NPU的三核异构SoC芯片,同时也是炬芯科技第三代高音质低延迟无线收发音频芯片,融合创新的NPU + DSP架构、出色的音频性能、强大的无线传输能力和低延迟无线特性。

炬芯ATS3231系列采用了基于模数混合电路的SRAM存内计算AI NPU和HiFi5 DSP融合架构,奠定强大的AI算力基础;通过全球首创的灵活双RF架构及新一代无线跳频技术,实现卓越的无线传输性能和抗干扰能力;支持全链路48KHz@32bit的高清音频通路,兼容2.4G NGPP-Gen3私有协议,兼具高清音质与超低延迟体验;同时支持32bit浮点内录,实现麦克风端的本地浮点录音功能。

据我爱音频网拆解获悉,目前已有大疆、哈曼卡顿、JBL、猛玛、Redmi、Bose、SONY、小米、荣耀、Anker、RØDE、魅族、博雅、绿联、神牛、漫步者、优篮子、美碳、REDMI、realme、倍思、Cleer、Nothing、创新科技、雷蛇、科唛、迈从、QCY、AnkerWork、唱吧、飞利浦、Fire-Boltt、Noise、NOISE、哈氪、鲸语、九号、沃莱、Loca、科大讯飞、唐麦、怪企鹅、AOMAIS、Motolola、小度、公牛、摩托罗拉、网易云、凡纪、SANAG等众多品牌的产品采用了炬芯科技的解决方案。

拆解报告:影石Insta360 Mic Pro无线麦克风

镭雕YL240的晶振细节图,为SoC提供时钟信号。

拆解报告:影石Insta360 Mic Pro无线麦克风

Nuvoton新塘NAU88L21YG是一款超低功耗且性能出色的音频编解码器,兼具模拟与数字音频处理能力。该芯片内置ADC和DAC,支持立体声耳机驱动输出,适配单立体声差分麦克风输入,支持两个单端麦克风输入,同时兼容立体声数字麦克风输入。

拆解报告:影石Insta360 Mic Pro无线麦克风

芯片表面标识为D42S 628的集成电路。

拆解报告:影石Insta360 Mic Pro无线麦克风

芯片表面标识为7223的集成电路。

拆解报告:影石Insta360 Mic Pro无线麦克风

芯片表面标识为5T8130的实时时钟(RTC)芯片。

拆解报告:影石Insta360 Mic Pro无线麦克风

芯片表面标识为TBTL的集成电路。

拆解报告:影石Insta360 Mic Pro无线麦克风

芯片表面标识为24AP的TVS二极管保护管。

拆解报告:影石Insta360 Mic Pro无线麦克风

标有1216字样的PMOS晶体管。

拆解报告:影石Insta360 Mic Pro无线麦克风

两颗带有1216丝印的PMOS管。

拆解报告:影石Insta360 Mic Pro无线麦克风

芯片表面刻有BDET254字样。

拆解报告:影石Insta360 Mic Pro无线麦克风

电源能力按键特写。

拆解报告:影石Insta360 Mic Pro无线麦克风

Type-C接口公头端的局部细节。

拆解报告:影石Insta360 Mic Pro无线麦克风

用于连接电池导线的插座局部。

拆解报告:影石Insta360 Mic Pro无线麦克风

SGMICRO圣邦微SGM41513A是一款具备NVDC电源路径管理功能的高输入电压、3A单节电池充电器,其通过I2C编程实现了高灵活性的供电与充电器外观设计思路。

拆解报告:影石Insta360 Mic Pro无线麦克风

SGMICRO圣邦微SGM41513A的详细资料示意图。

拆解报告:影石Insta360 Mic Pro无线麦克风

印有1216字样的PMOS晶体管。

拆解报告:影石Insta360 Mic Pro无线麦克风

丝印标注T2AEC的集成电路。

拆解报告:影石Insta360 Mic Pro无线麦克风

用于连接显示屏排线的BTB连接器母座特写。

拆解报告:影石Insta360 Mic Pro无线麦克风

用于连接充电触点排线的BTB连接器母座。

拆解报告:影石Insta360 Mic Pro无线麦克风

两颗带有24AP标识的IC芯片。

发射器拆解

拆解报告:影石Insta360 Mic Pro无线麦克风

通过拆卸正面面板,可观察到内部显示屏电路布局。

拆解报告:影石Insta360 Mic Pro无线麦克风

连接显示屏排线与主板所用的BTB连接器公座。

拆解报告:影石Insta360 Mic Pro无线麦克风

腔体内部结构解析,主板通过螺丝固定,并与排线通过连接器实现连接。

拆解报告:影石Insta360 Mic Pro无线麦克风

拧下螺丝,将腔体内的主板及振动马达取出。

拆解报告:影石Insta360 Mic Pro无线麦克风

腔体底部结构一览,中央部位固定着电池,四周的腔体壁上分别安装有三枚麦克风。

拆解报告:影石Insta360 Mic Pro无线麦克风

发射器主板一侧的电路解析,无线通讯模块同样被安置在屏蔽罩内。

拆解报告:影石Insta360 Mic Pro无线麦克风

发射器主板另一侧的电路一览。

拆解报告:影石Insta360 Mic Pro无线麦克风

移除主板上的屏蔽罩后,下方同样采用了Actions炬芯科技ATS3231AL端侧AI音频SoC,与接收器内部的ATS3231AL芯片配合使用,负责音频信号的采集、处理及2.4GHz无线传输。

拆解报告:影石Insta360 Mic Pro无线麦克风

Kingston金士顿EMMC32G-TS01存储器,其容量为32GB,主要用于支持浮点内录等功能,以储存录音数据。

拆解报告:影石Insta360 Mic Pro无线麦克风

对Type-C充电母座进行特写,可以看到其两侧分别设置了电源键和内录键。

拆解报告:影石Insta360 Mic Pro无线麦克风

用于指示工作状态的LED指示灯被安装在此处,另外还有一颗同规格的LED灯。

拆解报告:影石Insta360 Mic Pro无线麦克风

连接显示屏排线的BTB连接器母座位于此位置。

拆解报告:影石Insta360 Mic Pro无线麦克风

连接麦克风排线的BTB连接器母座位于此位置。

拆解报告:影石Insta360 Mic Pro无线麦克风

AKM旭化成AK5704模数转换器(ADC),集成4通道32位ADC及低噪声麦克风放大器,支持最高105dB动态范围、0~30dB麦克风增益调节,兼容8kHz至192kHz全采样率与I2S/TDM多种音频输出格式。

拆解报告:影石Insta360 Mic Pro无线麦克风

AKM旭化成AK5704详细规格图。

拆解报告:影石Insta360 Mic Pro无线麦克风

丝印AFX的IC。

拆解报告:影石Insta360 Mic Pro无线麦克风

带有丝印3798 2545标识的IC芯片。

拆解报告:影石Insta360 Mic Pro无线麦克风

连接电池排线的BTB连接器插座。

拆解报告:影石Insta360 Mic Pro无线麦克风

SGMICRO圣邦微SGM41513A集成NVDC电源路径管理的高输入电压、3A单节电池充电器。

拆解报告:影石Insta360 Mic Pro无线麦克风

带有"09TQ"标识的集成电路。

拆解报告:影石Insta360 Mic Pro无线麦克风

带有"AUET 137"标识的集成电路。

拆解报告:影石Insta360 Mic Pro无线麦克风

带有"B61MA"激光雕刻标识的振动马达细节图。

拆解报告:影石Insta360 Mic Pro无线麦克风

将腔体内置的电池和麦克风排线拆卸出来。

拆解报告:影石Insta360 Mic Pro无线麦克风

麦克风排线电路展示,配置有3个MEMS麦克风收音模块。

拆解报告:影石Insta360 Mic Pro无线麦克风

麦克风排线连接主板的BTB连接器公座特写。

拆解报告:影石Insta360 Mic Pro无线麦克风

镭雕551o TWM6的MEMS麦克风特写,三颗使用了相同型号。

拆解报告:影石Insta360 Mic Pro无线麦克风

发射器内置电池标签上信息一览,可充式锂离子电池组,型号:412024PF8,充电限制电压:4.48V,额定容量:240mAh,额定能量:0.94Wh,标称电压:3.89V,生产厂:重庆市紫建电子股份有限公司。

充电盒拆解

拆解报告:影石Insta360 Mic Pro无线麦克风

拆解充电盒部分,取掉机身正面盖板。

拆解报告:影石Insta360 Mic Pro无线麦克风

打开外壳后,移除充电盒的盖子。

拆解报告:影石Insta360 Mic Pro无线麦克风

充电盒盖的内侧装有电池单元,排线通过BTB连接器与主板相连。

拆解报告:影石Insta360 Mic Pro无线麦克风

取下由双面胶固定的电池单元。

拆解报告:影石Insta360 Mic Pro无线麦克风

充电盒内置的锂电池型号为722690PN8,充电限制电压为4.48V,额定容量为2815mAh,额定能量为10.951Wh,标称电压为3.89V,生产厂商为重庆市维都利新能源有限公司。

拆解报告:影石Insta360 Mic Pro无线麦克风

充电盒腔体内部的构造一览无余。

拆解报告:影石Insta360 Mic Pro无线麦克风

拨开连接器,取下电源输入小板。

拆解报告:影石Insta360 Mic Pro无线麦克风

展示电源输入小电路板的电路细节。

拆解报告:影石Insta360 Mic Pro无线麦克风

拧下螺丝,将主板单元取出。

拆解报告:影石Insta360 Mic Pro无线麦克风

腔体底部结构一览。

拆解报告:影石Insta360 Mic Pro无线麦克风

取下充电盒的底部外壳。

拆解报告:影石Insta360 Mic Pro无线麦克风

座舱侧面的指示灯排线构造详解。

拆解报告:影石Insta360 Mic Pro无线麦克风

为发射器供电的Pogo Pin连接器排线结构特写,左右两侧各有一个,分别对应两个发射器。

拆解报告:影石Insta360 Mic Pro无线麦克风

霍尔传感器排线结构详细特写。

拆解报告:影石Insta360 Mic Pro无线麦克风

将座舱底部的全部排线拆除。

拆解报告:影石Insta360 Mic Pro无线麦克风

霍尔元件排线电路示意图。

拆解报告:影石Insta360 Mic Pro无线麦克风

标识为bH 6A的霍尔元件近距离观察,该元件用于检测充电盒的开关盖状态,实现发射器与接收器的自动连接。

拆解报告:影石Insta360 Mic Pro无线麦克风

指示灯排线电路示意图。

拆解报告:影石Insta360 Mic Pro无线麦克风

用于显示充电盒剩余电量信息的四颗LED指示灯的特写镜头。

拆解报告:影石Insta360 Mic Pro无线麦克风

为发射器供电的排线电路的全面展示。

拆解报告:影石Insta360 Mic Pro无线麦克风

连接发射器的Pogo Pin连接器的特写镜头。

拆解报告:影石Insta360 Mic Pro无线麦克风

另一个为发射器充电的排线电路的全面展示。

拆解报告:影石Insta360 Mic Pro无线麦克风

充电盒主板一侧电路的详细展示。

拆解报告:影石Insta360 Mic Pro无线麦克风

充电盒主板另一侧的电路分布详图。

拆解报告:影石Insta360 Mic Pro无线麦克风

用于为接收器充电的Pogo Pin接口。

拆解报告:影石Insta360 Mic Pro无线麦克风

标有24AP字样的TVS保护二极管。

拆解报告:影石Insta360 Mic Pro无线麦克风

丝印为1216的PMOS场效应管。

拆解报告:影石Insta360 Mic Pro无线麦克风

用于连接指示灯排线的ZIF连接头,由亚奇科技(OCN)生产,型号OK-F501-06325。

拆解报告:影石Insta360 Mic Pro无线麦克风

连接用于发射器充电排线的ZIF连接器,来自亚奇科技(OCN),型号:OK-F501-06325。

拆解报告:影石Insta360 Mic Pro无线麦克风

NSING国民工艺N32L406CBL7 MCU单片机。该系列采用32位ARM Cortex-M4核心,最高工作主频64MHz,支持浮点运算和DSP指令,集成最高达128KB嵌入式加密Flash,24KB SRAM,并集成多种高性能模拟器件,内置1个12位5Msps ADC,2路独立轨到轨运算放大器,2个高速比较器,1个1Msps 12位DAC,支持多达24通道电容式触摸按键,集成高达320段的Segment LCD驱动,集成多路U(S)ART、I2C、SPI、USB、CAN等数字通信接口,内置密码算法硬件加速引擎。

拆解报告:影石Insta360 Mic Pro无线麦克风

NSING国民工艺N32L406CBL7详细资料图。据我爱音频网消息,目前已有谷歌、华为、联想、小米、比亚迪、大疆、荣耀、雷鸟、iQOO、MOMA猛玛、BOSE、Godox神牛等众多品牌旗下的产品采用了国民工艺的解决方案。

拆解报告:影石Insta360 Mic Pro无线麦克风

印有FLKHLA标识的电源管理IC。

拆解报告:影石Insta360 Mic Pro无线麦克风

Cellwise赛微微电的CW2215B锂电池电量统计芯片,具备5μA极低功耗特性,支持电流监测功能。

拆解报告:影石Insta360 Mic Pro无线麦克风

用于连接电池排线的BTB连接器插座。

拆解报告:影石Insta360 Mic Pro无线麦克风

连接霍尔元件排线的ZIF连接器,由亚奇科技(OCN)生产,具体型号为OK-F501-04325。

拆解报告:影石Insta360 Mic Pro无线麦克风

用于连接为发射器充电排线的ZIF连接器,制造商为亚奇科技(OCN),型号:OK-F501-06325。

拆解报告:影石Insta360 Mic Pro无线麦克风

用于连接电源输入小板排线的BTB连接器。

拆解报告:影石Insta360 Mic Pro无线麦克风

影石Insta360 Mic Pro无线麦克风的拆解全貌展示。

三、我爱音频网总结

拆解报告:影石Insta360 Mic Pro无线麦克风

影石Insta360 Mic Pro无线麦克风的核心部件清单在此列出,供查阅参考。

影石Insta360 Mic Pro无线麦克风的外观设计极具创新性。圆形发射器配备可自定义的墨水屏,既能展现个性,又能满足录制需求显示各类信息。接收器采用模块化设计,能稳固连接相机、发射器,兼容相机、手机和平板等录音设备,并配有触摸屏和波轮,提供直观反馈和便捷操作。充电盒适配发射器墨水屏,采用半透明面板,不开盖也能查看内部显示屏信息。

从内部主要规格来看,影石Insta360 Mic Pro麦克风的无线音频方案采用了Actions炬芯科技ATS3231AL端侧AI音频SoC,该芯片集成创新的NPU+DSP融合架构、出色的音频表现、强大的无线性能和低延迟传输,为设备各项功能提供有力支持。

其他方面,接收器内置紫建电子3.89V/410mAh锂电池,采用Nuvoton新塘NAU88L21YG音频编解码器、SGMICRO圣邦微SGM41513A电池充电器;发射器搭载紫建电子3.89V/240mAh锂电池,内置三颗MEMS麦克风,使用Kingston金士顿EMMC32G-TS01存储器、AKM旭化成AK5704模数转换器和圣邦微SGM41513A电池充电器。

充电盒内部配备维都利3.89V/2815mAh锂电池,采用Cellwise赛微微电CW2215B锂电池电量计芯片、NSING国民工艺N32L406CBL7 MCU单片机等方案。

Source: https://mp.weixin.qq.com/s/GgunWRyGJgSmhTplxEKjTg If there are copyright issues, please contact: 13951431913#139.com or submit a comment on the right.

As a globally leading smart imaging brand, Insta360 focuses on panoramic craftsmanship, specializing in R&D of panoramic cameras, action cameras, AI gimbals, webcams and other smart imaging devices, and launched a wireless lavalier microphone model in 2025 to improve audio quality in video recording. Recently, the new generation model Insta360 Mic Pro was officially released, featuring a creative e-ink screen design, a three-microphone array pickup, and excellent sound quality, bringing users a comprehensively innovative wireless microphone experience.

In terms of detailed specifications, the Insta360 Mic Pro wireless microphone transmitter is equipped with an e-ink screen compatible with personalized customization displays; it features a three-microphone array supporting omnidirectional, hypercardioid, and figure-8 pickup patterns for precise audio capture in different scenarios; it is equipped with an AI audio processing chip combined with noise reduction algorithms for outstanding noise suppression; it supports automatic gain adjustment to prevent clipping and volume fluctuations; and it offers three tone presets to make the voice more expressive.

The Insta360 Mic Pro supports up to two transmitters and four receivers, meeting multi-camera setup needs; it supports four transmitters and one receiver for multi-person interviews, and the e-ink screen can be set with independent serial numbers and labels for easy speaker identification; it supports 4-channel output with mono or stereo mode compatibility, making post-production more flexible; the transmitter has built-in 32GB storage supporting 32-bit float internal recording for additional backup; it also supports stereo internal recording for a more spatial audio experience.

In other aspects, this model is fully compatible with recording devices such as smartphones, cameras, and computers, and the transmitter can also connect directly to Insta360 ecosystem cameras for more convenient recording. The receiver features an OLED touchscreen and rotary dial for more intuitive information feedback and easier operation; it supports timecode input/output for seamless multi-camera post-production alignment. Regarding battery life, each transmitter can record for 10 hours, with a total recording time of 30 hours when paired with the charging case; a 5-minute quick charge provides approximately 1.5 hours of use. Let's now take a look at the detailed teardown report of this model~

I. Insta360 Mic Pro Wireless Microphone Unboxing

The Insta360 Mic Pro wireless microphone packaging uses a box-with-lid structure with a black background, displaying the product appearance and model name on top.

Teardown: Insta360 Mic Pro Wireless Microphone

The bottom of the packaging introduces the contents list and specifications. Transmitter model: MC110, Input: 5V-0.5A, Battery: 3.89V DC, 240mAh 0.94Wh; Receiver model: MC210, Input: 5V-0.7A, Battery: 3.89V DC, 410mAh 1.60Wh; Charging case model: MC310, Input: 5V-3A, Output: 5V-0.5A*2+0.7A, Battery: 3.89V DC, 2815mAh 10.951Wh; Manufacturer: Insta360 Innovation Technology Co., Ltd.

Teardown: Insta360 Mic Pro Wireless Microphone

The top of the packaging features wearing scenario images.

Teardown: Insta360 Mic Pro Wireless Microphone

The bottom of the packaging is printed with the promotional slogan "Your voice, Your style" for this product.

Teardown: Insta360 Mic Pro Wireless Microphone

The left side of the packaging lists in detail multiple technical features of the product: including customizable e-ink screen, three-microphone array, NPU processing chip, and 4-transmitter 1-receiver and 2-transmitter 4-receiver pickup modes.

Teardown: Insta360 Mic Pro Wireless Microphone

The other side of the packaging also displays multiple functional features of the device.

Teardown: Insta360 Mic Pro Wireless Microphone

After removing all components from the packaging, we can see the main unit, phone adapter, magnetic mounts, clip-on mount, windproof fur cover, carrying pouch, 3.5mm connection cable, USB-C data cable, quick start guide, and warranty card.

Teardown: Insta360 Mic Pro Wireless Microphone

The charging case of the Insta360 Mic Pro wireless microphone features a rounded square design with a translucent front cover, through which the e-ink screen display information on the transmitter inside can be clearly seen.

Teardown: Insta360 Mic Pro Wireless Microphone

Rear view of the charging case, with a Type-C charging port at the bottom.

Teardown: Insta360 Mic Pro Wireless Microphone

The front edge of the charging case has four LED indicator lights arranged to display remaining battery level.

Teardown: Insta360 Mic Pro Wireless Microphone

The top of the charging case integrates a sliding switch design, aimed at providing a smoother opening experience.

Teardown: Insta360 Mic Pro Wireless Microphone

The bottom of the charging case has anti-slip rubber pads and a model label whose information is consistent with the outer packaging.

Teardown: Insta360 Mic Pro Wireless Microphone

After opening the charging case, the internal compartment structure is fully visible, capable of holding all accessories including the microphone, adapter, and magnets.

Teardown: Insta360 Mic Pro Wireless Microphone

After removing all items from the compartment, the bottom structure is clearly visible, configured with metal contacts for charging the microphone.

Teardown: Insta360 Mic Pro Wireless Microphone

Overall appearance of the Insta360 Mic Pro wireless microphone; this product is the two-transmitter version.

Teardown: Insta360 Mic Pro Wireless Microphone

The two included magnets can attach the transmitter to any position on clothing for use.

Teardown: Insta360 Mic Pro Wireless Microphone

This USB-C phone adapter is used to connect the receiver to smartphones, tablets, and other USB-C recording devices.

Teardown: Insta360 Mic Pro Wireless Microphone

The back of the adapter has contact points for connecting the transmitter.

Teardown: Insta360 Mic Pro Wireless Microphone

The Insta360 Mic Pro receiver features a square design with the brand LOGO on the front slot cover.

Teardown: Insta360 Mic Pro Wireless Microphone

After removing the slot cover, the underlying buckle structure can be used to secure the transmitter, quickly converting it into a camera-mounted microphone.

Teardown: Insta360 Mic Pro Wireless Microphone

On the back of the body, there is a clip design that also functions as a cold shoe interface, allowing easy connection and fixation to a camera hot shoe.

Teardown: Insta360 Mic Pro Wireless Microphone

The top of the receiver is equipped with a touch display screen for function adjustment, with a rotary dial on the right for precise setting adjustments.

Teardown: Insta360 Mic Pro Wireless Microphone

The bottom of the receiver has a Type-C charging port and charging contacts, which are covered by the middle slot cover.

Teardown: Insta360 Mic Pro Wireless Microphone

After removing the slot cover, the exposed metal contacts below are used to connect the USB-C adapter.

Teardown: Insta360 Mic Pro Wireless Microphone

The left side of the device is equipped with a power button for turning the device on/off and locking/unlocking the screen.

Teardown: Insta360 Mic Pro Wireless Microphone

The right side of the device provides a 3.5mm camera audio port and a headphone monitoring port.

Teardown: Insta360 Mic Pro Wireless Microphone

The transmitter features a circular design with a color e-ink screen on the front, which users can freely customize via the APP.

Teardown: Insta360 Mic Pro Wireless Microphone

The detachable clip is located on the back of the body, with metal contacts for connecting to the charging case.

Teardown: Insta360 Mic Pro Wireless Microphone

The top of the device has microphone pickup holes protected by a metal cover.

Teardown: Insta360 Mic Pro Wireless Microphone

Detail of the microphone pickup hole on the right side of the body; the left side is the status indicator light, and the right side is the slot for securing the windproof cover.

Teardown: Insta360 Mic Pro Wireless Microphone

The right side of the body also has a microphone pickup hole, with the internal recording indicator light to its right.

Teardown: Insta360 Mic Pro Wireless Microphone

The bottom of the body integrates the Type-C charging port, along with the power button and internal recording button.

Teardown: Insta360 Mic Pro Wireless Microphone

By sliding up to remove the clip-on mount, the internal structure on the back of the transmitter can be seen.

Teardown: Insta360 Mic Pro Wireless Microphone

According to actual measurements by Aiwo Audio Network, the Insta360 Mic Pro two-transmitter wireless microphone with 2 magnets and adapter weighs approximately 256.0g in total.

Teardown: Insta360 Mic Pro Wireless Microphone

The transmitter weighs approximately 22.8g.

Teardown: Insta360 Mic Pro Wireless Microphone

The receiver weighs approximately 31.4g.

II. Insta360 Mic Pro Wireless Microphone Teardown

Through the unboxing, the author gained a detailed understanding of the innovative appearance of the Insta360 Mic Pro wireless microphone. Now let's move on to the teardown section to explore its internal structural specifications~

Receiver Teardown

Teardown: Insta360 Mic Pro Wireless Microphone

Removing the back cover of the receiver reveals the battery unit glued to the inner wall.

Teardown: Insta360 Mic Pro Wireless Microphone

After removing the battery unit, the wires connecting the positive and negative terminals of the battery are connected to the motherboard through a socket.

Teardown: Insta360 Mic Pro Wireless Microphone

The receiver is internally equipped with a rechargeable lithium-ion battery pack, model 441838PF8, with a charging limit voltage of 4.48V, rated capacity of 410mAh, rated energy of 1.60Wh, and nominal voltage of 3.89V. The battery is manufactured by Chongqing ZiJian Electronics Co., Ltd.

Teardown: Insta360 Mic Pro Wireless Microphone

The label on the back of the battery prints multiple certification information for the model.

Teardown: Insta360 Mic Pro Wireless Microphone

The internal structure layout of the entire cavity is clearly visible, with the motherboard firmly fixed inside by screws.

Teardown: Insta360 Mic Pro Wireless Microphone

After unscrewing the screws, the motherboard can be removed, along with the display screen at the top.

Teardown: Insta360 Mic Pro Wireless Microphone

Inside the cavity, a close-up of the rotary encoder is visible, with sealant applied to its surface.

Teardown: Insta360 Mic Pro Wireless Microphone

The circuit layout on the back of the display screen is fully visible.

Teardown: Insta360 Mic Pro Wireless Microphone

The display screen's flex cable connects to the BTB connector male socket on the motherboard.

Teardown: Insta360 Mic Pro Wireless Microphone

IC chip marked with 36221 540.

Teardown: Insta360 Mic Pro Wireless Microphone

Circuit distribution on one side of the receiver motherboard, with the wireless communication module protected by a shielding cover.

Teardown: Insta360 Mic Pro Wireless Microphone

Full view of the circuit on the other side of the receiver motherboard.

Teardown: Insta360 Mic Pro Wireless Microphone

Circuit diagram inside the shielding cover. The wireless audio solution uses Actions ATS3231AL edge AI audio SoC. The ATS3231 series is Actions' first tri-core heterogeneous SoC chip integrating AI-NPU, and also their third-generation high-fidelity low-latency wireless transceiver audio chip, combining an innovative NPU+DSP architecture, excellent audio performance, powerful wireless transmission capability, and low-latency wireless characteristics.

The Actions ATS3231 series adopts an AI NPU with in-memory computing based on analog-digital mixed circuits and a HiFi5 DSP fusion architecture, laying a strong foundation for AI computing power; through the world's first flexible dual RF architecture and next-generation wireless frequency-hopping technology, it achieves excellent wireless transmission performance and anti-interference capability; it supports a full-link 48KHz@32bit high-definition audio path, compatible with 2.4G NGPP-Gen3 proprietary protocol, combining high-definition audio quality with ultra-low latency experience; it also supports 32-bit float internal recording, achieving local float recording functionality at the microphone end.

According to the teardown by Aiwo Audio Network, many brands' products have adopted Actions' solutions, including DJI, Harman Kardon, JBL, RODE, Redmi, Bose, SONY, Xiaomi, Honor, Anker, RODE, Meizu, Boina, UGREEN, Godox, Edifier, Neewer, Meitan, REDMI, realme, Baseus, Cleer, Nothing, Creative, Razer, Koma, MCHOSE, QCY, AnkerWork, Changba, Philips, Fire-Boltt, Noise, HaKe, JingYu, Ninebot, Wolai, Loca, iFlytek, Tangmai, Strange Penguin, AOMAIS, Motorola, Xiaodu, Bull, NetEase Cloud, Fanji, SANAG, and many more.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of the crystal oscillator laser-engraved YL240, providing clock signal to the SoC.

Teardown: Insta360 Mic Pro Wireless Microphone

Nuvoton NAU88L21YG is an ultra-low-power, high-performance audio codec with both analog and digital audio processing capabilities. The chip integrates ADC and DAC, supports stereo headphone driver output, single stereo differential microphone input, two single-ended microphone inputs, and stereo digital microphone input compatibility.

Teardown: Insta360 Mic Pro Wireless Microphone

Integrated circuit marked D42S 628 on the chip surface.

Teardown: Insta360 Mic Pro Wireless Microphone

Integrated circuit marked 7223 on the chip surface.

Teardown: Insta360 Mic Pro Wireless Microphone

Real-time clock (RTC) chip marked 5T8130 on the chip surface.

Teardown: Insta360 Mic Pro Wireless Microphone

Integrated circuit marked TBTL on the chip surface.

Teardown: Insta360 Mic Pro Wireless Microphone

TVS diode protection tube marked 24AP on the chip surface.

Teardown: Insta360 Mic Pro Wireless Microphone

PMOS transistor marked 1216.

Teardown: Insta360 Mic Pro Wireless Microphone

Two PMOS tubes with 1216 marking.

Teardown: Insta360 Mic Pro Wireless Microphone

Chip surface engraved with BDET254.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of the power button.

Teardown: Insta360 Mic Pro Wireless Microphone

Local detail of the Type-C connector male end.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of the socket for connecting battery wires.

Teardown: Insta360 Mic Pro Wireless Microphone

SGMICRO SGM41513A is a high input voltage, 3A single-cell battery charger with NVDC power path management functionality, achieving highly flexible power supply and charger design through I2C programming.

Teardown: Insta360 Mic Pro Wireless Microphone

Detailed specification diagram of SGMICRO SGM41513A.

Teardown: Insta360 Mic Pro Wireless Microphone

PMOS transistor marked 1216.

Teardown: Insta360 Mic Pro Wireless Microphone

Integrated circuit with T2AEC marking.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of the BTB connector female socket for connecting the display flex cable.

Teardown: Insta360 Mic Pro Wireless Microphone

BTB connector female socket for connecting the charging contact flex cable.

Teardown: Insta360 Mic Pro Wireless Microphone

Two IC chips marked 24AP.

Transmitter Teardown

Teardown: Insta360 Mic Pro Wireless Microphone

By removing the front panel, the internal display circuit layout can be observed.

Teardown: Insta360 Mic Pro Wireless Microphone

BTB connector male socket for connecting the display flex cable to the motherboard.

Teardown: Insta360 Mic Pro Wireless Microphone

Internal structure analysis of the cavity; the motherboard is fixed by screws and connected to the flex cable via connectors.

Teardown: Insta360 Mic Pro Wireless Microphone

After unscrewing the screws, the motherboard and vibration motor inside the cavity are removed.

Teardown: Insta360 Mic Pro Wireless Microphone

Overview of the bottom structure of the cavity; the battery is fixed at the center, and three microphones are installed on the surrounding cavity walls.

Teardown: Insta360 Mic Pro Wireless Microphone

Circuit analysis of one side of the transmitter motherboard; the wireless communication module is also placed inside a shielding cover.

Teardown: Insta360 Mic Pro Wireless Microphone

Full view of the circuit on the other side of the transmitter motherboard.

Teardown: Insta360 Mic Pro Wireless Microphone

After removing the shielding cover on the motherboard, Actions ATS3231AL edge AI audio SoC is also used underneath, working in conjunction with the ATS3231AL chip in the receiver for audio signal acquisition, processing, and 2.4GHz wireless transmission.

Teardown: Insta360 Mic Pro Wireless Microphone

Kingston EMMC32G-TS01 memory storage with 32GB capacity, mainly used to support float internal recording and other functions for storing audio data.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of the Type-C charging female socket, with the power button and internal recording button set on either side.

Teardown: Insta360 Mic Pro Wireless Microphone

The LED indicator for showing working status is installed here, along with another LED of the same specification.

Teardown: Insta360 Mic Pro Wireless Microphone

The BTB connector female socket for connecting the display flex cable is located here.

Teardown: Insta360 Mic Pro Wireless Microphone

The BTB connector female socket for connecting the microphone flex cable is located here.

Teardown: Insta360 Mic Pro Wireless Microphone

AKM AK5704 analog-to-digital converter (ADC), integrating 4-channel 32-bit ADC and low-noise microphone amplifier, supporting up to 105dB dynamic range, 0~30dB microphone gain adjustment, compatible with 8kHz to 192kHz full sampling rates and I2S/TDM multiple audio output formats.

Teardown: Insta360 Mic Pro Wireless Microphone

AKM AK5704 detailed specification diagram.

Teardown: Insta360 Mic Pro Wireless Microphone

IC marked AFX.

Teardown: Insta360 Mic Pro Wireless Microphone

IC chip marked 3798 2545.

Teardown: Insta360 Mic Pro Wireless Microphone

BTB connector socket for connecting the battery flex cable.

Teardown: Insta360 Mic Pro Wireless Microphone

SGMICRO SGM41513A integrated NVDC power path management high input voltage, 3A single-cell battery charger.

Teardown: Insta360 Mic Pro Wireless Microphone

Integrated circuit marked 09TQ.

Teardown: Insta360 Mic Pro Wireless Microphone

Integrated circuit marked AUET 137.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of the vibration motor laser-engraved B61MA.

Teardown: Insta360 Mic Pro Wireless Microphone

Removing the internally mounted battery and microphone flex cable.

Teardown: Insta360 Mic Pro Wireless Microphone

Microphone flex cable circuit display, configured with 3 MEMS microphone pickup modules.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of the BTB connector male socket for connecting the microphone flex cable to the motherboard.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of MEMS microphone laser-engraved 551o TWM6; three units of the same model are used.

Teardown: Insta360 Mic Pro Wireless Microphone

Overview of information on the transmitter built-in battery label: Rechargeable lithium-ion battery pack, Model: 412024PF8, Charging limit voltage: 4.48V, Rated capacity: 240mAh, Rated energy: 0.94Wh, Nominal voltage: 3.89V, Manufacturer: Chongqing ZiJian Electronics Co., Ltd.

Charging Case Teardown

Teardown: Insta360 Mic Pro Wireless Microphone

For the charging case teardown, remove the front cover of the body.

Teardown: Insta360 Mic Pro Wireless Microphone

After opening the casing, remove the lid of the charging case.

Teardown: Insta360 Mic Pro Wireless Microphone

The inner side of the charging case lid has a battery unit, with the flex cable connected to the motherboard via BTB connector.

Teardown: Insta360 Mic Pro Wireless Microphone

Remove the battery unit fixed with double-sided tape.

Teardown: Insta360 Mic Pro Wireless Microphone

The built-in lithium battery model of the charging case is 722690PN8, with a charging limit voltage of 4.48V, rated capacity of 2815mAh, rated energy of 10.951Wh, and nominal voltage of 3.89V. The manufacturer is Chongqing Weiduli New Energy Co., Ltd.

Teardown: Insta360 Mic Pro Wireless Microphone

The internal structure of the charging case cavity is fully visible.

Teardown: Insta360 Mic Pro Wireless Microphone

Disengage the connector and remove the power input small circuit board.

Teardown: Insta360 Mic Pro Wireless Microphone

Displaying the circuit details of the power input small circuit board.

Teardown: Insta360 Mic Pro Wireless Microphone

Unscrew the screws and remove the motherboard unit.

Teardown: Insta360 Mic Pro Wireless Microphone

Overview of the bottom structure of the cavity.

Teardown: Insta360 Mic Pro Wireless Microphone

Remove the bottom shell of the charging case.

Teardown: Insta360 Mic Pro Wireless Microphone

Detailed explanation of the indicator light flex cable structure on the side of the cabin.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of the Pogo Pin connector flex cable structure for powering the transmitters; there is one on each side, corresponding to the two transmitters respectively.

Teardown: Insta360 Mic Pro Wireless Microphone

Detailed close-up of the Hall sensor flex cable structure.

Teardown: Insta360 Mic Pro Wireless Microphone

Remove all flex cables from the bottom of the cabin.

Teardown: Insta360 Mic Pro Wireless Microphone

Schematic diagram of the Hall element flex cable circuit.

Teardown: Insta360 Mic Pro Wireless Microphone

Close observation of the Hall element marked bH 6A; this element is used to detect the charging case lid open/close status, enabling automatic connection between the transmitter and receiver.

Teardown: Insta360 Mic Pro Wireless Microphone

Schematic diagram of the indicator light flex cable circuit.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of the four LED indicator lights used to display the remaining battery level information of the charging case.

Teardown: Insta360 Mic Pro Wireless Microphone

Comprehensive display of the flex cable circuit for powering the transmitters.

Teardown: Insta360 Mic Pro Wireless Microphone

Close-up of the Pogo Pin connector for connecting to the transmitters.

Teardown: Insta360 Mic Pro Wireless Microphone

Comprehensive display of the flex cable circuit for charging the other transmitter.

Teardown: Insta360 Mic Pro Wireless Microphone

Detailed display of one side of the circuit on the charging case motherboard.

Teardown: Insta360 Mic Pro Wireless Microphone

Detailed diagram of circuit distribution on the other side of the charging case motherboard.

Teardown: Insta360 Mic Pro Wireless Microphone

Pogo Pin interface for charging the receiver.

Teardown: Insta360 Mic Pro Wireless Microphone

TVS protection diode marked 24AP.

Teardown: Insta360 Mic Pro Wireless Microphone

PMOS field-effect transistor marked 1216.

Teardown: Insta360 Mic Pro Wireless Microphone

ZIF connector for connecting the indicator light flex cable, manufactured by OCN, model OK-F501-06325.

Teardown: Insta360 Mic Pro Wireless Microphone

ZIF connector for connecting the transmitter charging flex cable, from OCN, model: OK-F501-06325.

Teardown: Insta360 Mic Pro Wireless Microphone

NSING N32L406CBL7 MCU microcontroller. This series adopts a 32-bit ARM Cortex-M4 core with a maximum operating frequency of 64MHz, supports floating-point operations and DSP instructions, integrates up to 128KB embedded encrypted Flash, 24KB SRAM, and integrates various high-performance analog devices including one 12-bit 5Msps ADC, 2 independent rail-to-rail operational amplifiers, 2 high-speed comparators, one 1Msps 12-bit DAC, supports up to 24 channels of capacitive touch keys, integrates up to 320-segment Segment LCD drive, and integrates multiple U(S)ART, I2C, SPI, USB, CAN and other digital communication interfaces, with a built-in hardware acceleration engine for cryptographic algorithms.

Teardown: Insta360 Mic Pro Wireless Microphone

Detailed specification diagram of NSING N32L406CBL7. According to Aiwo Audio Network, many brands' products have adopted NSING solutions, including Google, Huawei, Lenovo, Xiaomi, BYD, DJI, Honor, Thunderbird, iQOO, MOMA, BOSE, Godox, and many more.

Teardown: Insta360 Mic Pro Wireless Microphone

Power management IC marked FLKHLA.

Teardown: Insta360 Mic Pro Wireless Microphone

Cellwise CW2215B lithium battery fuel gauge chip with ultra-low 5μA power consumption and current monitoring support.

Teardown: Insta360 Mic Pro Wireless Microphone

BTB connector socket for connecting the battery flex cable.

Teardown: Insta360 Mic Pro Wireless Microphone

ZIF connector for connecting the Hall element flex cable, manufactured by OCN, model: OK-F501-04325.

Teardown: Insta360 Mic Pro Wireless Microphone

ZIF connector for connecting the transmitter charging flex cable, manufacturer: OCN, model: OK-F501-06325.

Teardown: Insta360 Mic Pro Wireless Microphone

BTB connector for connecting the power input small circuit board flex cable.

Teardown: Insta360 Mic Pro Wireless Microphone

Full teardown overview of the Insta360 Mic Pro wireless microphone.

III. Aiwo Audio Network Summary

Teardown: Insta360 Mic Pro Wireless Microphone

The core component list of the Insta360 Mic Pro wireless microphone is listed here for reference.

The Insta360 Mic Pro wireless microphone features an highly innovative exterior design. The circular transmitter is equipped with a customizable e-ink screen that can display personality while also meeting recording needs by showing various information. The receiver adopts a modular design that can securely connect to cameras and transmitters, compatible with recording devices such as cameras, smartphones, and tablets, and is equipped with a touchscreen and rotary dial for intuitive feedback and convenient operation. The charging case adapts to the transmitter's e-ink screen with a translucent panel, allowing viewing of the internal display information without opening the lid.

From the internal main specifications, the wireless audio solution of the Insta360 Mic Pro microphone uses the Actions ATS3231AL edge AI audio SoC, which integrates an innovative NPU+DSP fusion architecture, excellent audio performance, powerful wireless capability, and low-latency transmission, providing strong support for all device functions.

In other aspects, the receiver has a built-in ZiJian Electronics 3.89V/410mAh lithium battery, using Nuvoton NAU88L21YG audio codec and SGMICRO SGM41513A battery charger; the transmitter is equipped with a ZiJian Electronics 3.89V/240mAh lithium battery, built-in three MEMS microphones, using Kingston EMMC32G-TS01 memory, AKM AK5704 analog-to-digital converter, and SGMICRO SGM41513A battery charger.

The charging case is internally equipped with a Weiduli 3.89V/2815mAh lithium battery, adopting Cellwise CW2215B lithium battery fuel gauge chip and NSING N32L406CBL7 MCU microcontroller solutions.

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry