本文来源:https://mp.weixin.qq.com/s/G9jj60zUDUFCz0zyG0jmYw
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
前段时间我写了一篇文章:墨水屏的黄金年代,比手机圈还野,里面放了一堆形态各异、造型狂野的的墨水屏电纸书。
其中有一款像书本一样可以折叠的墨水屏电纸书,很多人让我展开讲讲。
那今天就详细说一说。
而且我先把结论放在前面:这个形态有可能成为将来的主流。
注意注意,我说的是"双折",不是"折叠屏"。
这两者区别很大。

折叠屏我以前也写过。
元太花了9年研发,搞出来一个样品,在展会上短暂亮了个相就没了。

量产遥遥无期,大概率还有一堆工艺难题没应对,尤其是铰链部分。
感兴趣的可以翻我之前那篇:全球第一台折叠彩色电子书电纸书,长什么样
而今天要说的这款,走了一条完全不同的路。
Diptyx E-Reader是一个荷兰开发者做的开源项目,当下在Crowd Supply上众筹,已经有275人兼容,筹集了86000多美金,达成率320%。

处理器:ESP32-S3-N16R8(240MHz,16MB Flash,8MB RAM)
显示屏:2×5.83英寸黑白墨水屏,分辨率648×480,约138PPI
电池:2×1500mAh锂聚合物电池,合计3000mAh
存储:2GB可更换TF卡
接口:USB Type-C(充电+传输)
尺寸:合上120×150×14mm,展开226×150×14mm
重量:300g
售价:众筹价249美金(差一点就250美金)

固件使用MIT开源协议,众筹结束后硬件外观文件也会全部公开。
不绑DRM,不需要账号登录,不依赖任何云服务。
只读EPUB格式,借助USB-C把书拷进去就能用。
说白了,这就是一个极度纯粹的阅读设备。
它当下最大的瓶颈是ESP32那个8MB RAM。
开发者自己也坦言,跟树莓派比,ESP32在内存和表现上限制很多。
这款设备最核心的外观就是两块屏用铰链连起来,像书一样对折。
最直接的好处:不用买保护套、不担心碎屏。
合上之后两块显示屏面对面,自己保护自己。

以前拿墨水屏出门总是小心翼翼怕碎屏,这种形态直接把这个焦虑消灭了。
翻页感受也不一样。点一次翻页,左右两页内容同时刷新。跟翻一本真正的纸书是一个节奏。

而且因为是开源的,整机都是通用配件组装的,坏了可以自己修。
你要是有能力,还可以自己改固件,加WiFi能力、做RSS电纸书、甚至写个游戏——两块显示屏,一块表明一块当输入,玩法随便你想。

说实话,双屏阅读这件事本身,很多人可能觉得没什么。
但我觉得这个形态最大的想象力是加入手写能力之后。
现在它是两块5.83英寸的显示屏。如果把显示屏放大到7.8寸或8.2寸,再加个手写笔,事情就变了:左边表明内容,右边手写笔记,不需要任何分屏能力,天然就是左阅读右笔记。

你去看现在市面上的墨水屏设备,7.8寸、8.2寸、10.3寸甚至13.3寸,分屏思路做得都不够好。
只有13.3寸的显示屏上,分屏书写空间才勉强够用。但如果设备天然就是双屏,这个难题根本不存在。
沿着这个思路,将来有两个方向:
往大了做:放大显示屏尺寸,达成完美的左阅读、右笔记。
往小了做:缩到3.97甚至3.7英寸,变成一个巴掌大的小人书,便携性和可玩性直接拉满。
我在:巨头围剿下,墨水屏创业仅剩的3条路这篇文章里里说过,现在你能看到的大厂做的那些常规形态电纸书,已经没有红利可吃了。
作为创业者去跟大厂的成熟机型正面竞争,完全没有胜算。
与其跟着大厂赛跑,不如自己定义赛道。
Diptyx就是一个例子。一个荷兰人,一个人做的项目。它不跟Kindle比能力,不跟文石比平台,它根本就不往那个赛道上靠。

我倒是希望大厂能分出一点精力,偶尔做一两款这种看起来稀奇古怪的东西。
那些四平八稳的机型不会给你带来增量。
反而是这种有创新形态、能引起讨论的机型,才能把整个品类的热度带起来。
而且说实话,这种东西花不了多少资源,就是一个工艺上的探索。
墨水屏这个行业看似小众,但能容得下这么多大厂在里面玩,市面容量实际上不小。
墨水屏的下一站:从“一块屏”回归到“一本书”的形态。
谁先做出不一样的东西,谁就能吃到下一波红利。
Source: https://mp.weixin.qq.com/s/G9jj60zUDUFCz0zyG0jmYw If there is a copyright issue, please inform us at 13951431913#139.com or submit a comment on the right.
Recently, I wrote an article titled "The Golden Age of e-Ink, Wilder than the Smartphone Scene," which featured a collection of e-Ink e-readers with diverse and unconventional designs.
One particular device, which folds like a book, caught the attention of many readers, prompting me to write a detailed review.
Today, I will share my in-depth analysis of this device.
I'd like to state my conclusion upfront: this form factor has the potential to become the mainstream in the future.
Important note: I am referring to a "dual-screen" device, not a "folding screen" in the sense of a flexible OLED display.
These are two completely different concepts.

PART 01
The Challenges of Folding Screens
I have previously written about folding screens.
E Ink Holdings spent 9 years developing a prototype, which was briefly showcased at an exhibition before disappearing from the market.

Mass production is likely delayed due to unresolved technical challenges, particularly regarding the hinge mechanism.
For more information, you can refer to my previous article: "The World's First Folding Color E-Book E-Reader: What Does It Look Like?"
The device I am reviewing today takes a completely different approach.
PART 02
Diptyx E-Reader: A Book Composed of Two Screens
Project Overview
The Diptyx E-Reader is an open-source project developed by a Dutch engineer. It is currently undergoing a crowdfunding campaign on Crowd Supply, where it has already received support from 275 backers, raising over $86,000 (a 320% success rate).

Hardware Specifications
Processor: ESP32-S3-N16R8 (240 MHz, 16 MB Flash, 8 MB RAM)
Display: 2 x 5.83-inch black-and-white e-ink screens, 648 x 480 resolution (~138 PPI)
Battery: 2 x 1500 mAh lithium-polymer batteries (total 3000 mAh)
Storage: 2 GB removable TF card
Connectivity: USB Type-C (for charging and data transfer)
Dimensions: Closed - 120 x 150 x 14 mm; Open - 226 x 150 x 14 mm
Weight: 300 g
Price: Crowdfunding price of $249

Key Features
The firmware is released under the MIT open-source license, and the hardware design files will be made public after the crowdfunding campaign.
There is no DRM locking, no requirement for account login, and no dependency on cloud services.
It is a dedicated reader for EPUB files; users transfer books to the device via USB-C.
Essentially, this is an extremely pure and streamlined reading device.
The primary limitation of the device is the 8 MB RAM of the ESP32 processor.
The developer acknowledges that compared to Raspberry Pi, the ESP32 has significant limitations in terms of memory and performance.
PART 03
The Advantages of the Dual-Screen Folding Design
The defining characteristic of this device is the use of a hinge to connect two screens, allowing it to close like a book.
The most immediate benefit is the elimination of the need for a protective cover and the reduction of the risk of screen damage.
When closed, the two screens face each other, providing self-protection.

This design removes the anxiety associated with carrying an e-reader, as users no longer need to worry about scratching or cracking the screen.
The page-turning experience is also unique. A single tap refreshes the content on both pages simultaneously, mimicking the act of turning a page in a physical book.

Furthermore, because the device is modular and consists of standard components, it is easy to repair if something breaks.
For those with the technical expertise, the device offers opportunities for customization, such as adding Wi-Fi connectivity, integrating RSS feeds, or even developing games (with one screen for output and the other for input).

PART 04
The Potential for Innovation
While the concept of dual-screen reading may not seem revolutionary to some, I believe the true potential lies in integrating handwriting capabilities.
Currently, the device features two 5.83-inch screens. If the screens were scaled up to 7.8 or 8.2 inches, adding a stylus would create a perfect setup for note-taking: the left screen for reading the text and the right screen for writing notes, effectively creating a dedicated "left reading, right writing" layout.


There are two potential development paths for this form factor:
1. Upscale: Increase the screen size to optimize the split between reading and note-taking.
2. Downsize: Reduce the screen size to 3.97 or 3.7 inches to create a compact, pocket-sized device with high portability.
PART 05
What Should Large Companies Pay Attention To
In my previous article, "The 3 Remaining Paths for E-Ink Startups Under Siege by Giants," I stated that the current market for conventional e-readers is saturated, and startups have little chance competing against established players.
Instead of following the same path as major corporations, companies should "define their own race tracks."
The Diptyx project is a prime example of this. A single developer from the Netherlands created a device that stands out not by competing on features with Kindles or Boox readers, but by occupying a unique niche.

I hope that large technology companies will allocate resources to explore these "oddball" designs.
While reliable, cookie-cutter devices will not attract new users, innovative products with distinct form factors will generate buzz and expand the overall market.
Moreover, these experimental devices typically require minimal investment, serving primarily as a test of new manufacturing techniques and user acceptance.
The next step for the e-ink industry is to evolve from a single "screen" back into the form of a "book."

I actually hope the big companies can spare some energy to occasionally make one or two of these "bizarre" devices.
Those safe, conservative models won't bring you any incremental growth.
It's the ones with innovative forms that spark discussion—that's what drives the whole category forward.
And honestly, these projects don't require much resources; they're just a bit of engineering fun.
The e-ink industry may seem niche, but with so many big players in the game, the market is actually quite substantial.
The future of e-ink: moving from "a screen" back to "a book" in shape.
Whoever creates something different first will eat the next round of dividends.