本文来源:https://mp.weixin.qq.com/s/p7O3jriRaH8N6Mza2qzslQ
若有版权问题,请来信告知:13951431913#139.com 或在右方提交评论。
双屏手机在面对技术问题之前,最先直面的其实是一个道德困境。
你现在用的普通手机,装裤兜的时候总是习惯把屏幕贴着大腿;装上衣兜,屏幕朝向身体;有些人把手机插后兜里,屏幕也是冲着自己屁股。
单屏手机不需要选择,自然而然就会这么做。
但双屏手机呢?到底是把LCD那面贴着身体,还是墨水屏那面贴着身体?
每次掏出来放回去,都得做一次选择。
这条路上不缺前辈。
YotaPhone试过,海信A2也试过,最后都没跑通。
现在轮到海信A10和大我Bigme Hibreak Dual 2。
两家目前都只做了宣发,还没正式上市。
海信A10目前官方确认的参数:6.13英寸墨水屏、4nm8核高通芯片、安卓16、5G全网通、WiFi6。
芯片具体型号没公布,但根据各方信息,大概率就是高通QCM6690——文石Note X6用的那颗工业级芯片:Note X6实测:文石把海外卖了两年的旗舰,3299端回国内
安兔兔跑分大概在62万到70万之间,性能水平接近骁龙782G。
还有一点:海信A10的LCD副屏是磁吸上去的,能拆下来单独用墨水屏。
副屏是配件,不是机身的一部分。

大我Hibreak Dual 2这边:6.13英寸墨水屏、LCD副屏5英寸(不可拆卸)、芯片是联发科天玑8300(官方宣称跑分超160万)、12GB/16GB内存、256GB/512GB存储、5G双卡双待、带手写笔、整机240克、安卓16、36级可调双色温前光、前置500万像素、后置5000万像素、80帧/秒高刷。

芯片是最大的分水岭。
海信是高通6690,跑分60多万不到70万。
大我是天玑8300,160万。
跑分差了一倍多。

为什么海信选了一颗工业级芯片?
工业级芯片不用付像消费级芯片那种高昂的授权费,供应链也更稳定,能把成本压下来。
海信Hi Reader 2026被骂的最多的就是价格,如果当初首发直接定1599元,至少不会招那么多骂声——配置比其他几家全面落后,屏幕还是Carta1000,系统更是毛坯中的毛坯:海信Hi Reader 2026实测:1.7 万个“下次一定”,终究是海信错付了
A10在芯片上继续走工业级路线,大概也是同样的逻辑,为了把价格降下来:海信A10时间线:从极窄边框到全面妥协
大我则延续了堆料狂魔的风格。天玑8300、大内存、大存储、手写笔,能塞的全塞进去了。
单屏手机可以靠背板把热量导出去,双屏两面都是屏幕,热量往哪走?
主板和电池本身就是热源,两面又被屏幕封住了,散热路径比单屏窄得多。
不是电池容量的问题,是安全性。
电池夹在两块屏幕中间,一旦出问题,鼓包的风险在这种三明治结构里会被放大。
LCD和墨水屏的刷新机制完全不同,墨水屏再快也比LCD慢半拍。
系统要协调两块屏幕的显示切换、触控响应、应用分配,这套软件层面的活儿远比硬件复杂。
不过说到底,这些技术问题都是能解的。
这类手机以前失败的最大原因不是技术——是很多消费者嘴上说想要,真做出来了,不买了。
海信A10的问题在于LCD副屏是磁吸方案。
凡是磁吸,固定都没那么牢靠。
而且海信在小红书认证蓝V账号上一直发AI渲染图,实拍图反而是小号在发,这操作也挺让人看不懂。

大我Hibreak Dual 2的问题在于外观。
两块屏幕尺寸差了一寸多,渲染图看着确实不协调。

我一直觉得大我的美工有点粗糙,明明实物不丑,出来的平面图就是不上像。
目前是:海信双屏实现的方式不够优雅,大我双屏实现的方式不够美观。
这次盯着这两款产品的不只是墨水屏圈。
LCD圈的关注度其实更高。
原因很简单:主流手机厂商基本放弃了LCD市场,偶尔出几款也是不痛不痒。
对还在坚持LCD的用户来说,一款带LCD副屏的双屏手机反而成了稀缺品。

我在小红书发了这两家的双屏手机之后,评论区吵得挺厉害。
要么说海信不行,要么说大我不行。
但我希望关注我比较久的老粉能换个思路——这两款产品走的是完全不同的技术路线,一个模块化,一个一体化,不存在谁碾压谁的问题。
(海信还有一个“雷点”,那就是A10手机的系统,到底是谁在做?如果还像Hi Reader 2026的系统那样,那真的要拉完了,口碑要彻底崩了。主力手机和纯阅读器的安卓系统,难度不是一个量级。但如果真的是外包给掌阅做,那这盘棋反而能活了。)
(有人说海信还有大招没放出来,🤣,上周日,墨水屏简报第22期,我基本上把A10能写参数的都写全了。我真的没看出来还哪里能出来一个大招。8月份预计开卖的机器,按流程,这会应该在走工信部的认证了。)
大我Hibreak Dual 2在Kickstarter上已经开了众筹,最低档599美元。

海信A10的价格还没公布。
我估计这也是海信自己现在最纠结的问题,一点点挤牙膏一样的释放硬件参数,就是想试探大家能接受的价格。
我先估个价格:3999元。(墨水屏主机+LCD副屏套装价格)
对标着大我599美元起步的价格,你们觉得海信A10这个价合理吗?
最后,3篇深度专栏:
对于墨水屏基础知识还欠缺的,或者花了不少冤枉钱还云里雾里的,抓紧补课。
Source: https://mp.weixin.qq.com/s/p7O3jriRaH8N6Mza2qzslQ If there are copyright issues, please notify us at 13951431913#139.com or submit a comment on the right.
Before facing technical problems, dual-screen phones actually confront a moral dilemma first.
When you put your current ordinary phone in your pocket, you always instinctively face the screen toward your thigh; in your shirt pocket, the screen faces your body; some people even stick their phones in their back pockets with the screen facing their butt.
Single-screen phones don’t need to choose — the orientation is natural.
But with dual-screen phones, which side do you stick to your body? The LCD? Or the e-ink screen?
Every time you take it out and put it back in, you have to make a choice.
There are no shortage of precedents on this road.
YotaPhone tried, Hisense A2 tried — neither succeeded.
Now it’s Hisense A10 and Bigme Hibreak Dual 2’s turn.
Both have announced but not yet launched.
PART 01
Product Parameter Comparison
Hisense A10
Officially confirmed: 6.13-inch e-ink, 4nm 8-core Qualcomm chip, Android 16, 5G full netcom, WiFi 6.
Specific chip model unannounced, but likely Qualcomm QCM6690 (same as Boox Note X6), industrial-grade.
AnTuTu score ~62–70k, similar to Snapdragon 782G.
One more thing: the LCD secondary screen of the Hisense A10 is magnetically attached and can be detached for standalone use as an e-ink display.
Sub-screen is an accessory, not part of the main body.

Bigme Hibreak Dual 2
6.13-inch e-ink, 5-inch LCD sub-screen (non-detachable), MediaTek Dimensity 8300 chip (officially claimed >1.6M AnTuTu), 12/16GB RAM, 256/512GB storage, 5G dual-SIM, stylus, 240g, Android 16, 36-level dual-tone front light, 5MP front camera, 50MP rear camera, 80fps refresh.

PART 02
Core Difference: Chip Choice
The chip is the biggest divide.
Hisense uses Qualcomm 6690 (~60–70k AnTuTu), Bigme uses Dimensity 8300 (>1.6M AnTuTu).
That’s 2–3x difference in raw power.


Industrial chips avoid high licensing fees typical of consumer chips, and supply chains are more stable — helping control costs.
Hisense’s Hi Reader 2026 got backlash for being overpriced ($1599 would’ve been better); A10 continues this cost-saving strategy.
Bigme, meanwhile, goes full hardware luxury: top-tier chip, max memory/storage, stylus — all packed in.
PART 03
Technical Challenges of Dual Screens
Cooling is the thorniest issue.
Single screens vent heat through back plates; dual screens sandwich both sides with displays — where does heat go?
Mainboard and battery are heat sources, and trapped between screens, this risks overheating.
Battery safety is another concern — in a sandwich structure, swelling poses greater mechanical risk.
Software coordination is complex — LCD and e-ink have very different refresh rates and touch behaviors. The system must handle switching, allocation, and synchronization seamlessly.
Ultimately, these are solvable problems. The real failure of past dual-screeners wasn’t tech — it was that people said they wanted it, but didn’t buy when it arrived.
PART 04
Not Elegant Enough, Not Pretty Enough
Hisense A10’s magnetic sub-screen attachment isn’t robust — magnets don’t hold as firmly as permanent bonding.
Also, why is Hisense posting AI renders on its official account while leaving real shots to side accounts? Curious strategy.

Bigme Hibreak Dual 2’s visual balance is off — the ~1-inch size difference between screens makes it look mismatched in renders.

I think Bigme’s design team undersells the product — the prototype looks nicer in hand than on paper.
So far: Hisense’s implementation lacks elegance, Bigme’s lacks aesthetic harmony.
PART 05
More Than Just E-ink Fans Are Watching
This isn’t just an e-ink circle event — LCD fans are paying attention too.


Comments are split: some bash Hisense, others slam Bigme.

(A side note: if Hisense outsources A10’s OS to PandaBook again, like Hi Reader 2026, that’ll be a disaster. But if they do, it might just save the game.)
PART 06
Price Prediction
Bigme Hibreak Dual 2’s Kickstarter starts at $599.

Hisense A10’s price is TBD — perhaps they’re gauging market response before committing.
My guess: ¥3999 for the full set (e-ink + LCD sub-screen).
Does that sound right based on Bigme’s $599?

👉 Don’t buy blindly! E-ink basics to save $1000+ in trial error.
👉 3 kill lines to end the “bought-again” cycle of e-readers.
👉 Giants besieging: 3 remaining paths for e-ink startups.
If you’re still confused or spent too much, read up now.
(Some say Hisense has a big surprise still to reveal. 🤣 In the E-Ink Report #22 last Sunday, I wrote down every parameter of the A10 that was available. I genuinely can’t see where another major feature could come from. For a device expected to sell in August, it should be undergoing MIIT certification by now.)
PART 06
价格预测
The Bigme Hibreak Dual 2 is already crowdfunding on Kickstarter with a starting price of $599.

The price for the Hisense A10 has not been announced yet.
I guess this is the most pressing issue for Hisense right now — they’re slowly revealing hardware specs in a “squeezing the toothpaste” manner, likely to gauge what price point consumers will accept.
I’ll estimate a price: 3999 yuan (e-ink host + LCD secondary screen set).
Benchmarking against Bigme’s $599 starting price, do you think this is a reasonable price for the Hisense A10?
最后,3篇 深度专栏 :
👉 Don’t buy e-ink blindly! A crash course on the basics to save thousands in trial-and-error costs.
👉 Three hard stops to end the “bought-again-and-again” frustration with e-ink devices.
👉 The only three paths left for e-ink startups under pressure from giants.
For those still fuzzy on e-ink basics or who’ve wasted money without understanding, catch up — fast.