
Erqos EQSP32CE是一款DIN导轨式工业物联网可编程逻辑控制器,主控采用乐鑫ESP32‑S3(集成Wi‑Fi与蓝牙),硬件搭载以太网、RS485、RS232、CAN总线全规格工业通讯接口。
这款工业物联网逻辑控制器集成多路带防护IO:16路数字量IO、8路通用模拟量输入、8路电流型输入、8路特殊模式模拟量输入、16路支持PWM的数字输出;板载USB‑C接口用于固件烧录与调试监测;整机宽压直流供电7V~26V,板载5V/1A稳压输出,可对外拓展IO模块供电。
EQSP32CE硬件规格参数
主控芯片
乐鑫ESP32‑S3,双核LX7@240MHz,板载8MB闪存、512KB片上RAM,自带无线射频(型号ESP32‑S3FN8)。
通讯接口
- 10/100Mbps自适应RJ45以太网
- ESP32自带Wi‑Fi+低功耗蓝牙(板载内置天线)
- 带电气防护RS232、半双工RS45,原生支持Modbus‑RTU、DMX512及自定义串口协议
- 带隔离防护CAN总线
- USB‑C:程序下载、设备调试供电
可软件组态IO端子
- 数字输入:最多16路防护型输入,耐压兼容24V工业电平,全端子可配置
- 通用模拟输入:18号端子共8路防护输入,量程0~10V
- 电流输入:18号端子软件切换为4~20mA工业电流采集
- 特殊模拟模式:1~8端子支持雨量采集(RAIN)、温度采集(TIN)专用组态
- 数字输出:16路带保护固态下拉开关,全部支持PWM脉宽调制输出
辅助配置
电源、运行、Wi‑Fi、蓝牙、网口状态指示灯;板载蜂鸣器用于故障告警。
电气规格
- 整机输入电源:直流7V~26V
- 辅助对外输出:稳压直流5V/1A
物理参数
尺寸:90×71×57mm;重量:175g;工作温度:‑20℃~+55℃;防护等级:IP20

认证合规(欧盟RED指令2014/53/EU CE认证)
- 电气安全:EN IEC 62368‑1:2020+A11:2020,户外安全遵循EN 62368‑1附录Y
- 射频辐射与人身安全:EN IEC 62311:2020、EN 50566:2017、EN 62479:2010、EN 50663:2017、EN 50665
- 通用EMC电磁兼容:EN 55032、EN 55024(EN 55035)
- 无线射频EMC:ETSI EN 301 489‑1 V2.2.3、ETSI EN 301 489‑17 V3.2.4
- 工业场景EMC:ETSI EN 303 446‑1 V1.2.1(兼容EN 61000‑6‑2、EN 61000‑6‑4等通用工业EMC标准)
- 无线射频法规(Wi‑Fi/蓝牙):ETSI EN 300 328 V2.2.2、EN 300 440 V2.2.1、EN 301 893 V2.1.1
- 环保:欧盟RoHS指令2011/65/EU

拓展模组生态
EQSP32CE可对接Erqos全系拓展模块:通用数字IO、模拟输入/输出、热电偶、PT100热电阻、PH水质检测、继电器、GSM/GPRS无线通讯模块,详细资料可查阅原厂产品文档站。
整机采用软件自定义IO架构:16个物理端子既可配置为数字输入,也能设为固态输出;前8个端子额外复用多路模拟采集功能。
开发方式
- 普通用户:Arduino IDE / VS Code搭配原厂EQSP32 Arduino库,C/C++开发;
- 高阶开发:原生ESP‑IDF框架开发;
AI辅助编程:配套EQ‑AI智能生成工具(接入ChatGPT大模型),工程师使用自然语言描述设备逻辑,即可自动生成完整C++工程代码,一键生成MQTT订阅发布、JSON解析、网络重连、设备诊断、REST服务全套业务代码。
产品售价与厂商信息
Erqos总部位于希腊,在美国、中国香港设有仓储现货; 零售单价:185美元 / 155欧元;OEM批量采购可洽谈定制价。
补充说明
市面上基于ESP32方案的工业PLC由来已久,同类竞品品牌包含TECHBASE、NORVI/Iconic Devices、Industrial Shields,EQSP32CE是该品类新增选型。

The Erqos EQSP32CE is a DIN-rail industrial IoT programmable logic controller featuring Espressif's ESP32‑S3 as its main controller (with integrated Wi‑Fi and Bluetooth), equipped with full-spec industrial communication interfaces including Ethernet, RS485, RS232, and CAN bus.
This industrial IoT logic controller integrates multiple protected IO channels: 16 digital IOs, 8 universal analog inputs, 8 current-type inputs, 8 special-mode analog inputs, and 16 PWM-capable digital outputs; a board-mounted USB‑C port is used for firmware flashing and debug monitoring; the unit supports wide-range DC power input of 7V~26V, with a board-mounted 5V/1A regulated output for powering external IO modules.
EQSP32CE Hardware Specifications
Main Controller Chip
Espressif ESP32‑S3, dual-core LX7 @240MHz, with 8MB onboard flash, 512KB on-chip RAM, and built-in wireless RF (model ESP32‑S3FN8).
Communication Interfaces
10/100Mbps auto-sensing RJ45 Ethernet
ESP32 built-in Wi‑Fi + Bluetooth Low Energy (built-in onboard antenna)
Electrically protected RS232, half-duplex RS485; native support for Modbus‑RTU, DMX512, and custom serial protocols
Isolated CAN bus
USB‑C: program download and device debug power supply
Software-configurable IO terminals
Digital input: up to 16 protected inputs, compatible with 24V industrial voltage levels, all terminals configurable
Universal analog input: 8 protected inputs on terminal 18, range 0~10V
Current input: terminal 18 software-switchable to 4~20mA industrial current acquisition
Special analog mode: terminals 1~8 support dedicated configurations for rainfall (RAIN) and temperature (TIN) acquisition
Digital output: 16 protected solid-state sink switches, all supporting PWM pulse width modulation output
Auxiliary Configuration
Power, run, Wi‑Fi, Bluetooth, and Ethernet status indicator LEDs; onboard buzzer for fault alarms.
Electrical Specifications
Overall input power: DC 7V~26V
Auxiliary external output: regulated DC 5V/1A
Physical Parameters
Dimensions: 90×71×57mm; Weight: 175g; Operating temperature: ‑20℃~+55℃; Protection rating: IP20

Certification & Compliance (EU RED Directive 2014/53/EU CE Certification)
Electrical safety: EN IEC 62368‑1:2020+A11:2020; outdoor safety follows EN 62368‑1 Annex Y
RF radiation and personal safety: EN IEC 62311:2020, EN 50566:2017, EN 62479:2010, EN 50663:2017, EN 50665
General EMC: EN 55032, EN 55024 (EN 55035)
Wireless RF EMC: ETSI EN 301 489‑1 V2.2.3, ETSI EN 301 489‑17 V3.2.4
Industrial scene EMC: ETSI EN 303 446‑1 V1.2.1 (compatible with general industrial EMC standards such as EN 61000‑6‑2, EN 61000‑6‑4)
Wireless RF regulations (Wi‑Fi/Bluetooth): ETSI EN 300 328 V2.2.2, EN 300 440 V2.2.1, EN 301 893 V2.1.1
Environmental: EU RoHS Directive 2011/65/EU

Expansion Module Ecosystem
The EQSP32CE can connect to Erqos's full range of expansion modules: general digital IO, analog input/output, thermocouples, PT100 resistance thermometers, PH water quality sensors, relays, and GSM/GPRS wireless communication modules. For detailed information, consult the official product documentation site.
The unit adopts a software-defined IO architecture: the 16 physical terminals can be configured as digital inputs or solid-state outputs; the first 8 terminals additionally multiplex multiple analog acquisition functions.
Development Approach
For general users: Arduino IDE / VS Code with the official EQSP32 Arduino library for C/C++ development;
For advanced developers: native ESP‑IDF framework development;
AI-assisted programming: the EQ‑AI intelligent code generation tool (powered by ChatGPT) allows engineers to describe device logic in natural language and automatically generate complete C++ project code, one-click generating MQTT subscribe/publish, JSON parsing, network reconnection, device diagnostics, REST service, and other full business logic code.
Product Pricing & Manufacturer Information
Erqos is headquartered in Greece, with warehouses and stock available in the United States and Hong Kong, China; Retail price: $185 USD / €155 EUR; OEM bulk purchase prices available upon inquiry.
Supplementary Notes
Industrial PLCs based on ESP32 solutions have been on the market for some time; comparable competing brands include TECHBASE, NORVI/Iconic Devices, and Industrial Shields. The EQSP32CE is a new addition to this category.