全球最薄手表众筹翻车:7600人等了3年却没人收到World's Thinnest Smartwatch Startup Crowdfunding Fails: 7,600 People Waited 3 Years But No One Received


AI free token/AI免费积分

如果要评选众筹史上最可惜的翻车案例之一,CST-01绝对能排进前列。2013年,7600多人提前掏钱支持它。项目筹到超过100万美元。媒体把它称为“未来手表”。然而3年后,公司申请破产。很多支持者既没拿到手表,也没拿回自己的钱。而这一切,都源于一个看起来无比简单的目标:把手表做得足够薄。图片

2013年,一块“来自未来”的手表出现了

故事开始于美国一家创业公司 Central Standard Timing。当时智能手表还没有真正普及。Apple Watch甚至还没发布。市场上的电子表大多厚重、笨拙,设计感也谈不上出色。于是团队提出了一个大胆想法:能不能做一块极致轻薄的手表?最终,他们做出了 CST-01。厚度只有0.8毫米。什么概念?大约相当于8张A4纸叠在一起。重量仅12克。戴在手腕上几乎感觉不到存在。更重要的是,这不是概念设计。而是一块真的能显示时间的电子表。2013年,这种产品看起来就像从未来穿越回来的一样。图片

众筹上线后,全网疯狂下单

2013年1月,项目登陆 Kickstarter。团队原本只希望筹集20万美元。结果远远超出预期。短短几周时间,7600多名支持者参与众筹。最终筹集超过100万美元。达到目标金额的5倍以上。对于一家刚成立不久的创业公司来说,这几乎是一夜成名。科技媒体开始报道。设计媒体开始报道。消费者论坛也在讨论。很多人相信:这可能会成为下一代可穿戴设备的代表产品。图片

真正的问题,才刚刚开始

但众筹成功后,团队很快发现一件事。做出样机。和量产产品。根本不是同一场游戏。为了实现0.8毫米的厚度,团队采用了特殊柔性电子墨水显示屏。每个零件都被压缩到了极限。实验室里能成功。工厂里却问题不断。显示屏良率不稳定。组装精度要求极高。部分零件供应频繁延迟。制造成本也开始快速上涨。原本以为已经解决的问题,又一个接一个冒出来。图片

最危险的信号出现了

随着时间推移,交付日期不断往后推。支持者开始等待。几个月过去了。产品没有发货。一年过去了。问题依旧存在。更糟糕的是,团队发现当初的成本计算严重失误。众筹价格大约129美元。而实际生产成本却接近260美元。也就是说:每生产一块手表,公司都在亏钱。卖得越多,亏得越多。这是很多硬件创业公司最害怕出现的局面。市场明明认可产品。但商业模式已经失去平衡。图片

钱越来越少,问题越来越多

到了2015年,项目已经陷入恶性循环。量产速度远低于计划。资金持续消耗。为了完成剩余订单,团队还需要额外获得上百万美元资金。但此时投资人开始观望。合作伙伴开始退场。供应链问题始终无法彻底解决。项目更新越来越少。支持者的耐心也被一点点耗尽。曾经充满期待的留言区,逐渐变成大型吐槽现场。图片

结局

2016年,CST-01背后的公司 Central Standard Timing 正式申请破产。法庭文件显示,公司账面仅剩几万美元资产,却背负着接近百万美元债务。由于众筹支持者属于无担保债权人,排在偿还顺序最后。由于众筹支持者属于最后一批受偿对象,大多数人最终既没拿到手表,也没拿回自己的钱。曾经轰动全球的“未来手表”,就这样停留在了Kickstarter页面里。资料来自网络产品咨询/商务合作请联系👇

 

If one were to nominate one of the most heartbreaking crowdfunding failures of all time, the CST-01 would certainly rank near the top. In 2013, over 7,600 people paid in advance to support it, raising more than $1 million. The media dubbed it the "watch from the future." But three years later, the company filed for bankruptcy. Many backers received neither the watch nor their money back. And it all started from what seemed like an incredibly simple goal: making the watch thin enough.图片

In 2013, a "watch from the future" appeared

The story begins with a U.S. startup called Central Standard Timing. At the time, smartwatches had not yet truly gone mainstream—Apple Watch hadn't even been announced. The electronic watches on the market were mostly bulky, clumsy, and far from design-forward. So the team came up with a bold idea: what if they could build an ultra-thin watch? The result was the CST-01, just 0.8 millimeters thick. To put that in perspective, that's about the thickness of eight sheets of A4 paper stacked together. It weighed only 12 grams—barely noticeable on the wrist. More importantly, this wasn't a concept prototype; it was a fully functional digital watch that could actually tell the time. In 2013, a product like this looked like it had come straight from the future.图片

Once the crowdfunding campaign went live, orders poured in across the internet

In January 2013, the project launched on Kickstarter. The team originally hoped to raise just $200,000, but it far exceeded expectations. Within weeks, over 7,600 backers had signed up, and the campaign ultimately raised more than $1 million—over five times the target amount. For a fledgling startup, this was almost overnight fame. Tech media covered it. Design media covered it. Consumer forums buzzed about it. Many believed this could become the next iconic wearable device.图片

The real problems were only just beginning

But shortly after the successful crowdfunding campaign, the team quickly discovered a harsh truth: making a working prototype and mass-producing a product are two entirely different games. To achieve the 0.8mm thickness, the team used a special flexible e-ink display, compressing every component to its limit. What worked in the lab ran into constant issues in the factory. Display yield rates were unstable. Assembly tolerances were extremely demanding. Some component suppliers faced frequent delays. Manufacturing costs began climbing rapidly. Problems thought already solved kept popping up one after another.图片

The most dangerous signal appeared

As time went on, delivery dates kept slipping. Backers began to wait. Months passed—no shipment. A year passed—problems persisted. Even worse, the team realized their initial cost estimates were wildly off. The crowdfunding price was around $129, while the actual production cost was close to $260. In other words: the company lost money on every single watch it produced. The more it sold, the more it lost. This is the nightmare scenario for many hardware startups: the market clearly approved of the product, but the business model was already unbalanced.图片

Money dwindled, and problems multiplied

By 2015, the project had fallen into a vicious cycle. Mass production speed lagged far behind schedule. Funds were being consumed continuously. To fulfill the remaining orders, the team needed an additional million-plus dollars. But at that point, investors began to sit on the sidelines. Partners started dropping out. Supply chain issues could never be fully resolved. Project updates grew increasingly scarce. Backers' patience was gradually worn away. The comment section that once brimmed with excitement slowly turned into a massive complaint thread.图片

The end

In 2016, Central Standard Timing, the company behind the CST-01, officially filed for bankruptcy. Court documents showed the company had only tens of thousands of dollars in assets but nearly a million dollars in debt. Because crowdfunding backers are unsecured creditors, ranked last in the repayment order, the vast majority ultimately received neither the watch nor their money back. The once globally sensationalized "watch from the future" simply remained frozen on its Kickstarter page. Source: internet. For product inquiries / business cooperation please contact 👇

暂无评论,快来发表第一条评论吧!No comments yet. Be the first!

📮 需求咨询📮 Inquiry